Levenhuk LX700 Hunting Laser Rangefinder User Manual
- June 9, 2024
- levenhuk
Table of Contents
Levenhuk LX700 Hunting Laser Rangefinder User Manual
Overview
- POWER/MEASURE button
- MODE button
- Laser output/objective lens
- Laser receiving lens
- Focusing ring
- Type-C USB port
- 1/4″ thread
Please carefully read the safety instructions and the user manual before using this product, otherwise it may result in hazardous laser radiation and electric shock. Use the device only as specified in the user manual. Keep away from children.
LCD Display
- Low battery indicator
- Angle icon
- Current angle value
- Center of the target (bullseye)
- Flagpole lock mode
- Distance measurement mode
- Straight line distance
- Units of measurement
- Trajectory adjustment icon
- Trajectory adjustment value
- Speed icon
Getting started
-
Charging the device. Connect the power cable to the device and the DC adapter via a USB plug and connect it to the AC power supply. Charging voltage and current: 5V, 1A.
-
Press the POWER/MEASURE button to turn the device on or off. The rangefinder enters the distance measurement mode by default (Fig. 1).
-
Rotate the focusing ring until the view is in focus.
-
Press and hold the MODE button to change the measurement units. Quickly press this button to choose between the modes.
There are 5 modes available: 1) distance measurement mode, 2) slope mode, 3) horizontal distance mode, 4) height distance mode, and 5) speed mode.
Using
Distance measurement mode
In the distance measurement mode, aim the device at your intended target and
press the POWER/MEASURE button. The distance value will be displayed (Fig. 2).
Press and hold the POWER/MEASURE button for continuous measurement.
Note: The maximum measurement range is affected by weather conditions as
well as the dimensions and reflectivity of the target object.
Slope mode/Flagpole lock mode
The device will measure the angle of incline/decline, then calculate and
display the slope-adjusted distance. In the slope mode, press the
POWER/MEASURE button. The angle, distance value, and trajectory correction
will be displayed (Fig. 3a, 3b).
Flagpole lock. In the slope mode, press and hold the POWER/MEASURE button, then move the device slightly left and right until the distance to the flagpole is locked and displayed on the LCD (Fig. 4). After locking a flagpole, the device will vibrate.
Horizontal distance mode
In horizontal distance mode, you can measure the horizontal distance between
two points. You can use single measurement or continuous measurement (Fig. 5).
Height distance mode
In height distance mode, you can measure the vertical distance between two
points. You can use single measurement or continuous measurement (Fig. 6).
Speed mode
In speed measurement mode, point the reticle at a moving target, and then
press the POWER/MEASURE button. Do not let the moving object out of your field
of view in order to display the indication (Fig. 7).
Specifications
| LX700 | LX1000 | LX1500 | |
|---|---|---|---|
| Measuring range, m | 5–700 | 5–1000 | 5–1500 |
| Units of measurement | m, y | ||
| Laser class | class II, 905nm, <1mW | ||
| Magnification, x | 6 | ||
| Objective lens diameter (aperture), mm | 25 | ||
| Operating temperature range | –10…+40°C (14… 104°F) | ||
| Power supply | 750mA∙h built-in li-ion battery; Charging voltage and | ||
| current: 5V, 1A |
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Please carefully read the safety instructions and user manual before using
this product. Otherwise, it may result in hazardous laser radiation and
electric shock. Keep away from children.
This is a class II laser product. Please DO NOT look directly into the beam
with unprotected eyes or through an optical device at any time and never
direct it toward other people. Do not remove any safety labels. Do not aim the
device directly at the sun. Do not try to disassemble the device on your own
for any reason. For repairs and cleaning of any kind, please contact your
local specialized service center. Protect the device from sudden impact and
excessive mechanical force. Do not use the product in explosive environment or
close to flammable materials. Store the device in a dry cool place. Only use
accessories and spare parts for this device that comply with the technical
specifications. Never attempt to operate a damaged device or a device with
damaged electrical parts! If a part of the device or battery is swallowed,
seek medical attention immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products,
except for their accessories, carry a lifetime warranty against defects in
materials and workmanship. A lifetime warranty is a guarantee on the lifetime
of the product on the market. All Levenhuk accessories are warranted to be
free of defects in materials and workmanship for six months from the purchase
date. The warranty entitles you to the free repair or replacement of the
Levenhuk product in any country where a Levenhuk office is located if all the
warranty conditions are met.
For further details, please visit:
www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product,
contact the local Levenhuk branch.
www.levenhuk.com
Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612,
USA, +1-813-468-3001,
contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919, sales-info@levenhuk.cz
Levenhuk® is a registered trademark of Levenhuk, Inc.
© 2006–2023 Levenhuk, Inc. All rights reserved.
20221128
References
- Доживотна гаранция на Levenhuk – Официален уебсайт на Levenhuk в България
- Levenhuk’s official website in USA
- Levenhuk Limited Warranty – Levenhuk’s official website in USA
- Doživotní záruka společnosti Levenhuk – Oficiální webové stránky Levenhuk pro Českou republiku
- Levenhuk Lebenslange Garantie – Die offizielle Website von Levenhuk in Deutschland
- Garantía internacional de por vida Levenhuk – Web oficial de Levenhuk en España
- Levenhuk Lifetime Warranty – Levenhuk’s official website in USA
- A Levenhuk élettartamra szóló szavatossága – A Levenhuk hivatalos magyarországi weboldala
- Gwarancja bezterminowa Levenhuk – Oficjalna witryna internetowa Levenhuk w Polsce
- Поддержка - Гарантийное обслуживание Левенгук - Levenhuk Russia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>