BORMANN PRO BWR5209 Tool Carrier with 3 Shelves Instruction Manual

June 9, 2024
BORMANN PRO

Built to last.
BWR5209
049982
Tool Carrier with 3 Shelves
Instruction Manual

BWR5209 Tool Carrier with 3 Shelves

WWW.NIKOLAOUTOOLS.GRBORMANN PRO BWR5209 Tool
Carrier with 3 Shelves - Figure

The assembly sequence of the tool trolley:

  1. First,make the caster connect with the chassis, The fixed casters and the swivel casters are install on the short side can’t be the same side.
    Using the hex bolts.

  2. Install pillars,Use the round head screw to connect with the pillars and the plates,On the top of the right. There are two holes that you need to stay behind. They are for the handle.

  3. Install handle.

Technical Data

Product Size: 750350750 (mm)

WARRANTY

The workshop equipment has been manufactured according to strict standards set by our company, which are aligned with the respective european quality standards. The workshop equipment is provided with a warranty period of 12 months. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the workshop equipment (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. Replacement of a spare part with repair charge is covered by a 1 year warranty of good operation, subject to compliance with the warranty terms. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The said equipment must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.
WARRANTY EXEMPTIONS AND RESTRICTIONS:

  1. Spare parts that wear out naturally as a consequence of being used.
  2. Workshop equipment damaged as a result of non-compliance with the instructions of the manufacturer.
  3. Workshop equipment poorly maintained or taken care of.
  4. Use of improper spare parts or accessories.
  5. Workshop equipment given to third entities free of charge.
  6. Damage as a result of mistaken assembly.
  7. Damage as a result of poor quality of lubricant.
  8. Damage as a result of not cleaning the equipment as required.
  9. Equipment that has been modified or disassembled by unauthorized personnel.
  10. Equipment used for rent.

The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specific spare part the company reserves the right to replace the equipment with another of the same kind. After all warranty procedures have been concluded, the warranty period of the equipment shall not be extended or renewed. The spare parts or equipment that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding repairing a piece of equipment or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.
WARRANTY
This appliance is a quality product. It was designed in compliance with current technical standards and made carefully using normal, good quality materials. The warranty period is 12 months and commences on the date of purchase, which can be verified by the receipt, invoice or delivery note. During this warranty period all functional errors, which, despite the careful treatment de-scribed in our operating manual, are verifiably due to material flaws, will be rectified by our after-sales service staff. The warranty takes the form that de-fective parts will be repaired or replaced with perfect parts free of charge at our discretion. Replaced parts will become our property. Repair work or the replacement of individual parts will not extend the warranty period not will it result in a new warranty period being commenced for the appliance. No sepa-rate warranty period will commence for spare parts that may be ted. We cannot offer a warranty for damage and defects on appliances or their parts caused by the use of excessive force, improper treatment and servicing. This also applies for failures to comply with the operating manual and the installation or spare and accessory parts that are not included in our range of products. In the event of interference with of modifications to the appliance by unauthorized persons, the warranty will be rendered void. Damages that are attributable to improper handling, over loading, or natural wear and tear are excluded from the guar-antee. Damages caused by the manufacturer or by a material defect will be corrected at no charge by repair or by providing spare parts. The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee. For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing. Please send us the appliances post-paid or request a Freeway sticker. Unfortunately we will be unable to accept appliances that are not postpaid. The warranty does not cover parts that are subject to natural wear and tear. If you wish to make a warranty claim, report faults or order spare parts or accessories, please contact the aftersales center below: Subject to change without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals