belkin WIC008 Boost Charge Pro Wireless Car Charger Instruction Manual
- June 9, 2024
- belkin
Table of Contents
Boost Charge Pro
Wireless Car Charger
with MagSafe 15W
SKU/MODEL: WICOOB
WIC008 Boost Charge Pro Wireless Car Charger
Things you need to know before using the product A consulter avant d’utiliser le produit belkin.com/MagAttachlnfo
BoostCharge™ Pro
Wireless Car Charger With MagSafe 15W Chargeur de voiture sans fil avec MagSafe
Regulatory and Sustainability Information
NORTH AMERICA
Safety Instructions
WARNING: Failure to follow these Instructions could result m fire, electric shock. miury, or damage to the user, product, or other property.
- Connect the power supply of the wireless charger into a power outlet that 1s close by and Is easy to disconnect from the source.
- Use indoors and in a dry location only; Avoid charging near sources of heat and humidity.
- Keep the wireless charger and power supply away from any liquids or moisture.
- Unplug the wireless charger when not 1n use for long periods of time
- Do not store your device In very hot or very cold locations It is recommended to use your de111ce at room temperarure.
- Do not use if visible defects are observed on the wireless charger or power supply.
- Do not attempt to service, modify, or disassemble the wireless charger or power supply.
- Use of a power supply not recommended or sold by Belkin may result man increased risk of fire, electric shock. miury, or damage to the user, product, or other property
- Wireless charging power transmission rate Is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level and age of the device being charged.
CAUTION: If you experience problems with the wireless charger, please
discontinue use, unplug the power supply from the socket. and contact Belkin
for assistance
The marking Information is located on the bottom of the apparatus.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Belkin International, Inc. El Segundo, CA 90245. USA, Tel •1010) 751 5100,
declare under our sole responsibility that this product complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with rhe limits for a Class
B digital device, pursuant to Parr 15 of the FCC Rules. These limits are
designed ro provide reasonable protection against harmful interference 1n a
residential 1nsrallat1on.
This equipment generates, uses. and can radiate radio frequency energy, and 1f
not installed and used in accordance with the instrucrions. may cause harmful
interference lo radio communicallons. However. there is no guarantee that
interference will not occur in a partis;ular installation. If this equipment
does cause harmful interference to radio or television recepllOn, which can be
determined by turning the equipment off and on, the user is encouraged to try
and correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlel on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modificar1ons not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Radiation Exposure Statement:
This equipment complies with F-CC rad1allon exposure limrts set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
Innovation, Science, and Economic Development Cernida Statement (ISED):
This device cont ams l,cence·exempt transm,tter(s)/receover(s) that comply
with Innovation, Science and Economic Development Canada’s licenct-exempt
RSS(s) Operation is subject to the following two conditions,
(1) This device may nor cause interference.
(2) This device must accept any interference, Including interference that may
cause undesired operation of the device
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. Th,s equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
Innovation, Sdence and Economic Development Canada Statement:
This d1g1tal apparatus complies with CAN ICES-003(8) / NMB-003(B).
EUROPE
CE Declaration of Conformity
We. Belkin International, Inc. declares lhat the rad,o equipment is in
compliance with Directive 2014/53/EU and RoHS Directive 2015/863. The full
text of
the EU declaration of conformity is available at the following Internet
address: wwwbelkin.com/doc.
Caution: Any changM or mod1ficahons not expressly approved bv the party
responsible for compliance could void the user’s authority to operate this
equipment.
Radiation Exposure Statement: This equipment complies with radiation exposure
limits ser forth for an uncontrolled environment. This equipmenr should be
installed and operated with a minimum distance of 20 cm between the radiator
and your body
Frequency band ,n which the radio equipment operates: 127.7 kHz, 360 kHz
Maximum power transm11ted: tlO dBµA/m
UKCA Conformity:
Radio Equipment Regulations 2017 (S.1. 2017/1206)
Recycling programs for this packaging may not ex,st in your area
Waste Eleclriall and Electronic Equipment Directive
For information on product disposal. please refer to http://www.belkin.com/uk
/weee-regulahons/
Pursuant to and in accordanct with Arricle 14 of the Directive 2012/19/EU of
the European Parliament on waste in electrical and electronic equipment
(WEEE).
The barred symbol of the rubbish b,n shown on the equipment indicares that, al
lhe end of its useful life, the product must be collected separately from
other was le.
Therefore, any product that have reached the end of their useful life must be
given to waste disposal centers specializing in separate collection of waste
electrical and electronic equipment or given back to the dealer when
purchasing a new WEEE, pursuant to and in accordance with Article 14 as
implemented m the country.
Belkin International. Inc. El Segundo. CA 9024S. USA
Belkin Ltd.. Unit 1, Regent Park. Boom Drive, Wellingborough, Northants NN8
6GR. Unifed Kingdom
Belkin B.V, Her,kerbergweg 106. Plaza Arena – Jupiter, no1 CM. Amsterdam. The
Netherlands
Belkin Asia Pacific Ltd. Hong Kong
Belkin Ltd. Tuggerah, Australia
japansuppon@bellun.com
Belkin Tech Support: www.belkm.com/support
8850bt01680 Rev. A02
Documents / Resources
|
belkin WIC008 Boost Charge Pro Wireless Car
Charger
[pdf] Instruction Manual
WIC008 Boost Charge Pro Wireless Car Charger, WIC008, Boost Charge Pro
Wireless Car Charger, Charge Pro Wireless Car Charger, Wireless Car Charger,
Car Charger, Charger
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>