1Mii B0BY8JW5X1 Wireless Audio Adapter User Manual
- June 10, 2024
- 1Mii
Table of Contents
Wireless
Audio Adapter User Manual
Model:B06T4
In the box
Product Overview
Reset device
Control Functions
Quick guide
Pair and connect
- Put 80614 with your phone as close as possible.
- Press thews button for 2 secondarily LED Ight (lashing between red and bluebottle is in pair mode.
- Activate the Bluetooth of the mobile phone/computer/tablet. ‘806r4r to connect and wok for the paring to succeed.
- Plug the 80614 to your speaker or soundbar c amplifier through cable packed in box.
* How to antes: pairing mode?
press the es/0 button for 2 seconds, while LED light flashing between red and
blue. 806T4 with enW into pair mode.
Reset device
If the receiver cannot be paired or wort properly. please do method to reset
the device: Press the eve button for 5 times until the light flash purple
guicklyaber 3t:eneslhot means the device hos been reeled
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by 1Mii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by 1Mii Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radio frequency electromagnetic
energy and operates within the guidelines found in radio frequency safety
standards and recommendations. These standards and recommendations reflect the
consensus of the scientific community and result from deliberations of panels
and committees of scientists who continually review and interpret the
extensive research literature.
CE
LMii Ltd. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the
following Internet address: www.lmii.com In
accordance with Article 10(2) and Article 10(10), this product is allowed to
be used in all EU member states.
Shenzhen 1Mii Technologies Limited Baoan District Shenzhen 518100 China
EU Importer: eVatmaster Consulting GmbH Bettinastr. 30,60325 Frankfurt am
Main,Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as
from connecting to an unsuitable power source, using an unsuitable device, or
not following the instructions, as well as damag-es that did not occur during
shipping, repairs and adjustments not approved by the company, damages from
misuse, inattention, or improper installation may cause the warranty to be
ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose
the used appliance together with household waste.
eVatmoster Consulting GmbH Bettinastr. 30 60325 Frankfurt am MainGermany
contact@evatmaster.com
Scon the code to aet more information.
https://www.ymoox.com/download-2/#tab- id-3
Operator: ANKBIT INTERNATIONAL LIMITED Address- ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA TSUI, KOWLOON, HONG KONG Manufacturer: ShenZhen Ankbit Electronics Limited Address- Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan Dist, Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
support@lmii.com
web:www.lmii.com
FCC ID: 2A6ET-RT5015
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>