BOYA BY-WM3T2-U2 2.4GHz Wireless Microphone System User Manual
- June 10, 2024
- Boya
Table of Contents
BOYA BY-WM3T2-U2 2.4GHz Wireless Microphone System
Introduction
The BOYA BY-WM3T2 is an ultracompact and portable 2.4GHz wireless microphone system for up to 2 people, compatible with cameras, smartphones, tablets and more. It features automatic pairing and selectable noise cancellation, delivering broadcast-quality sound with remarkable ease of use. The BY-WM3T2 is ideal for content creation, live streaming, vlogging, mobile journalism and much more. This series has 3 different receiver options: RXD, RXU, or RX35 included in the kits. The BY-WM3T2-TX Transmitter and BY-WM3T2-RX35 Receiver support up to 1 O hours of runtime. The BY-WM3T2-RXD and BY-WM3T2-RXU receivers are device powered and have USB-C charging ports, which support charging and powering of devices while in use.
Cautions
- Don’t place this unit close to heat sources such as heater, oven, or other devices that produce heat.
- When using and storing, please pay attention to dust and moisture.
- For optimal sound pickup, please do not cover the microphone head with your hand.
Available Kits
Product Structure
BY-WM3T2-TX
Status indicator
| Status | Indicator |
|---|---|
| Unpaired | Blinks blue and red alternately |
| Successfully paired | Solid blue |
| Mute ON | Blinks blue quickly (per second) |
| Low battery | Blinks red (every 5 seconds) |
| Noise Cancellation ON | Blinks blue slowly (every 2.5 seconds) |
| Noise Cancellation OFF | Solid blue |
| Charging | Solid red |
| Fully charged | Light off |
Note: If charging the unit when it is ON, the indicator will display the current working status instead of charging status.
Power/Mute button
Long press the button for 2 seconds to turn on/off the unit. Short press the
button to mute/unmute the microphone. Double click the button to turn on/off
noise cancellation
Belt clip
Built-in mic
USB-C charging port
For charging the transmitter.
BY-WM3T2-RXU
Status indicator
USB-C connector
It can be connected to an Android phone, tablet or other USB-C devices.
USB-C charging port
When the BY-WM3T2-RXU is plugged into an external device, the external device
can be powered via this charging port.
Note: Most USB-C devices can be charged through this port, which also
supports QC2.0, PD2.0 fast charging protocols.
BY-WM3T2-RXD
Status indicator
Lightning connector
It can be connected to an iOS Lightning device.
USB-C charging port
When the BY-WM3T2-RXD is plugged into an external device, the external device
can be powered via this charging port.
Note: iPad and iPhone can be charged through this port, which also
supports up to 3A fast charging.
BY-WM3T2-RX35
Status indicator
| Status | Indicator |
|---|---|
| Unpaired | Blinks blue and red alternately |
| Successfully paired | Solid blue |
| Mute ON | Blinks blue quickly (per second) |
| Low battery | Blinks red (every 5 seconds) |
| Noise Cancellation ON | Blinks blue slowly (every 2.5 seconds) |
| Noise Cancellation OFF | Solid blue |
| Charging | Solid red |
| Fully charged | Light off |
Note: If charging the unit when it is ON, the indicator will display the current working status instead of charging status.
Power button
Long press the button for 2 seconds to turn ON or OFF the unit.
USB-C charging port
For charging the receiver.
3.5mm TRS connector
It can be connected to cameras, recorders, mixers or other devices with a
3.5mm TRS jack.
How to Use
For the kit of BY-WM3T2-U1/ BY-WM3T2-U2/ BY-WM3T2-D1/ BY-WM3T2-D2
- Press and hold the power button for 2 seconds to turn on the Transmitter(s).
- Plug the BY-WM3T2-RXD into an iOS device or the BY-WM3T2-RXU into a USB-C device.
- Transmitter(s) and receiver will be automatically paired within 10 seconds.
- You are ready to record.
For the kit of BY-WM3T2-M1/ BY-WM3T2-M2
- Plug the BY-WM3T2-RX35 into a device with a 3.5mm TRS jack.
- Press and hold the power button for 2 seconds to turn on the transmitter(s) and receiver.
- Transmitter(s) and receiver will be automatically paired within 10 seconds.
- You are ready to record.
Note: Due to the 2.4GHz wireless frequency is widely used, the signal may be easily attenuated or interfered. Please try to avoid obstacdes while using, such as walls and buildings. And keep away from the devices with 2.4GHz frequency, such as high-power Wi-Fi antennas, radios, etc.
Specifications
| Transmission Type | 2.4GHz |
|---|---|
| Polar Pattern | Omnidirectional |
| Frequency Response | 20Hz-16kHz |
| Signal-to-Noise Ratio | 77 dB |
| Sensitivity | -42 dB |
| Sampling Rate | 48kHz |
| Bit Depth | 16bit |
| Transmission Range | som (without obstacle) |
| RF Output Power | 6dBm |
| TX & RX35 Battery Life | 10 hours |
| Battery Capacity | TX: 9SmAh RX35: 90mAh |
| Charging Port | USB-C |
Dimensions
| TX: 52×17.SxlS.6 mm
RXU/RXD: 46×26.2×9 mm
RX35: 53.7x36xl3.5 mm
Weight| TX: 8.Sg (0.30 oz)
RXU/RXD: Sg (0.18 oz)
RX35: 10.Sg (0.37oz)
Packing List
BY-WM3T2-U1
- BY-WM3T2-TX transmitter x1
- BY-WM3T2-RXU receiver x1
- USB-C charging cable x1
- Foam windscreen x1
BY-WM3T2-D1
- BY-WM3T2-TX transmitter x1
- BY-WM3T2-RXD receiver x1
- USB-C charging cablex1
- Foam windscreen x1
BY-WM3T2-M1
- BY-WM3T2-TX transmitter x1
- BY-WM3T2-RX35 receiver x1
- USB-C charging cable x2
- Foam windscreen x1
BY-WM3T2-U2
- BY-WM3T2-TX transmitter x2
- BY-WM3T2-RXU receiver x1
- USB-C charging cable x2
- Foam windscreen x2
BY-WM3T2-D2
- BY-WM3T2-TX transmitter x2
- BY-WM3T2-RXD receiver x1
- USB-C charging cable x2
- Foam windscreen x2
BY-WM3T2-M2
- BY-WMBT2-TX transmitter x2
- BY-WM3T2-RX35 receiver x1
- USB-C charging cable x3
- Foam windscreen x2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>