anslut 018972 Decorative LED Party Lights User Manual

June 10, 2024
anslut

Item no. 018972
PARTY LIGHTS LED

OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference.
(Translation of the original instructions)
Jula reserves the right to make changes.
For latest version of operating instructions, see www.jula.com

anslut 018972 Decorative LED Party Lights - fig1

SAFETY INSTRUCTIONS

Read the instructions carefully before use. Save them for future reference.

  • For indoor and outdoor use.
  • It is very important that these party string lights are NEVER CONNECTED DIRECTLY to the mains.
  • Do not cover the LED bulbs with decorations or other flammable materials. Make sure there is an adequate flow of air around each of the LED bulbs..
  • The LED bulbs cannot be replaced.
  • Make sure not to damage the wire insulation on the LED bulb holders.
  • Do not staple or nail the wiring on the party string lights.
  • Do not clench the wiring in doors or windows, this can damage the insulation on the wiring.
  • Do not put the wiring under carpets or other places where it can be damaged.
  • Make sure that all the wiring is fully unwound and placed so that it cannot be damaged, and where there is no risk of anyone tripping over it.
  • The party string lights must not be connected to any another product.
  • Do not connect the party string lights to the mains when still in the pack.
  • Do not allow any of the plastic parts to come into contact with sources of heat or a naked flame.
  • Do not unscrew or twist any of the LED bulbs.
  • Do not submerge the party string lights in water (e.g. puddle, gutter or pond).
  • The transformer gets hot when in use and so it should be placed on a level, stable and heat-resistant surface.
  • The party string lights are supplied with a DC 24 V 01 transformer and must only be used with this.
  • Unplug the party string lights from the mains when leaving the house, overnight, and when left unattended.
  • Do not overload the power point. Use different power points around the house to distribute the load if several party string lights are used.
  • Only intended for decoration. Must not be used as a toy for children.

SYMBOLS

| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

Input voltage, transformer 230 V ~ 50 Hz
Output voltage, transformer 24 VDC
Protection rating IP44
Colour temperature LED Warm white

DESCRIPTION

These party string lights can safely be used both indoors and outdoors, but make sure to plug the transformer into a power point indoors, not outdoors or where it is damp.
FIG. 1

USE

This product has LED bulbs connected in series and in parallel.

  • Carefully remove the party string lights from the packaging to avoid damaging the wiring.
  • Make sure that the wiring is fully unwound and that there are no loops in it.
  • Switch on the string lights by plugging the transformer into a power point indoors.

JULA AB, BOX 363, SE-532 24 SKARA
2022-11-04
© Jula AB

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals