RAIN HARVESTING TSEF16 High Wall Tank Screen 360 with Screw Down Ring Installation Guide
- June 10, 2024
- Rain Harvesting
Table of Contents
RAIN HARVESTING TSEF16 High Wall Tank Screen 360 with Screw
Product Details
The High Wall Tank Screen 360 is an ultra-high flow tank screen designed to keep out leaves and pests while allowing a large amount of water into your tank. Its unique High Wall design sits above the water line to ensure debris does not enter even if the tank is full.
- Code: TSEF16
- Size: 400mm (Global)
You can obtain more information about the product or contact the manufacturer by visiting rainharvesting.com.
Installation
The High Wall Tank Screen 360 comes with an easy-to-fit screw-down inlet ring.
What’s in the Box?
- High Wall Tank Screen 360
- Easy Fit Screw Down Inlet Ring
Tools/Materials You May Require
- Drill
- Screws
How It Works
The Tank Screen 360 is a high-flow inlet solution for rainwater tanks. Its
unique design keeps out sunlight, pests, and debris while offering easy
maintenance.
Refer to Figure 1 for suggested installation orientations.
Product Specifications
| Country | Code | TANK HOLE SIZE (mm) | A | B | C | D |
|---|---|---|---|---|---|---|
| Global | TSEF16 | 348-382 | 13.7-15.04 | 420 | 85 | 346 |
Maintenance
You should regularly inspect your High Wall Tank Screen 360 and remove any
leaves or debris. For a more thorough clean, simply unclip your High Wall Tank
Screen 360 and hose it off before reattaching it to your tank.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or
wanting to keep the garden green, our simple steps will help you achieve your
goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
Working
The Tank Screen 360 is a high flow inlet solution for rainwater tanks. Its
unique design keeps out sunlight, pests, and debris and offers simple
maintenance.
- Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is appropriate for your tank material.
- To secure your High Wall Tank Screen 360, place it over the ring so that the 3 clips on the Tank Screen 360 align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear them click into place. Ensure all 3 clips are secured.
- Install your inlet pipes as close to the bottom screen as possible, whilst still allowing space for debris clearance and removal of the Tank Screen 360 for maintenance.
- To remove your Tank Screen 360, lift each of the release tabs until they disengage, and the screen can be lifted off.
DISCLAIMER This product specification is not a complete guide to product
usage. Further information is available from Rain Harvesting Pty Ltd and from
the installation and Operating instructions. This specification sheet must be
read in conjunction with the installation and Operating Instructions and all
applicable statutory requirement. Product specifications may change without
notice. © Rain Harvesting Pty Ltd
rainharvesting.com
For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>