RAIN HARVESTING TSEF17 High Wall Tank Screen 360 Solar Shield Kit Installation Guide

RAIN HARVESTING TSEF17 High Wall Tank Screen 360 Solar Shield Kit

Product Information: High Wall Tank Screen 360 Solar Shield Kit

The High Wall Tank Screen 360 Solar Shield Kit is designed to prevent leaves, sunlight, pests, and debris from entering into your rainwater tank. The ultra high flow tank screen with an integrated solar shield ensures that you will never lose a drop of rain again. This product has a High Wall design that sits above the water line to prevent debris from entering into the tank when it is full. The product code is TSEF17 and the size is 400mm, suitable for global usage. It is easy to install and requires tools such as a drill and screws. All the necessary components to install the kit come in the box, which includes High Wall Tank Screen 360, Easy Fit Solar Shield, and Easy Fit Screw Down Inlet Ring. The tank screen kit can fit into a tank hole with dimensions A (364-382 mm), B (420 mm), C (85 mm), and D (362 mm). Maintenance includes regular inspection of the tank screen to remove any debris or leaves. For thorough cleaning, unclip the High Wall Tank Screen 360 and hose it off before reattaching it to the tank.

Product Usage Instructions

1. Choose a suitable orientation for installation based on Figure 1 in the instruction manual.
2. Ensure that you have all the necessary tools and components for installation, including a drill and screws.
3. Remove any debris or leaves from the tank before installation.
4. Place the Easy Fit Screw Down Inlet Ring onto the tank inlet and screw it down securely.
5. Attach the Easy Fit Solar Shield to the High Wall Tank Screen 360.
6. Clip the High Wall Tank Screen 360 onto the Easy Fit Screw Down Inlet Ring.
7. Ensure that the High Wall Tank Screen 360 sits above the water line to prevent debris from entering the tank when it is full.
8. Regularly inspect the tank screen and remove any debris or leaves. For thorough cleaning, unclip the High Wall Tank Screen 360 and hose it off before reattaching it to the tank.

If you require more information, please visit our website at rainharvesting.com or contact us at +61 7 3248 9600.

PRODUCT DETAILS

Never lose another drop of rain again with the High Wall Tank Screen 360 Solar Shield Kit. The ultra high flow tank screen includes an integrated solar shield to keep leaves and sunlight out. High Wall design sits above the water line to ensure debris isn’t soaking if you’re tank is full.

Installation

WHAT’S IN THE BOX?

• High Wall Tank Screen 360
• Easy Fit Solar Shield
• Easy Fit Screw Down Inlet Ring

TOOLS/MATERIALS YOU MAY REQUIRE

• Drill
• Screws

HOW IT WORKS

The Tank Screen 360 is a high flow inlet solution for rainwater tanks. Its unique design keeps out sunlight, pests, and debris and offers simple maintenance.

1. Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is appropriate for your tank material

2.  To install your Solar Shield, place it into the ring so it is suspended in the tank inlet hole with the 3 arms resting in the location features on the ring. If the arms are not properly seated rotate the solar shield until the arms drop into the location features on the ring.

3.  To secure your High Wall Tank Screen 360, place it over the ring so that the 3 clips on the Tank Screen 360 align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear them click into place. Ensure all 3 clips are secured.

4. Install your inlet pipes as close to the bottom screen as possible, whilst still allowing space for debris clearance and removal of the Tank Screen 360 for maintenance .
   Suggested Installation Orientations
   

5. To remove your Tank Screen 360, lift each of the release tabs until they disengage, and the screen can be lifted off.

Product Specifications

High Wall Tank Screen 360
360 Solar Shield Kit

All dimensions are in mm unless otherwise stated.

Maintenance

You should regularly inspect your High Wall Tank Screen 360 and remove any leaves or debris. For a more thorough clean, simply unclip your High Wall Tank Screen 360 and hose it off before reattaching to your tank.

supported by RAIN HARVESTING
A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help. With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal. The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.

How can we help you?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the installation and Operating instructions. This specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at rainharvesting.com

References

• Cleaner Water. More of it. | Rain Harvesting by BMCo US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>