Rain Harvesting RHML03 Shark Cage for Maelstrom Original Installation Guide

Rain Harvesting RHML03 Shark Cage for Maelstrom Original

Shark Cage for Maelstrom Original

The Shark Cage for Maelstrom Original delivers massive amounts of water to your tank. The single skin Shark Cage uses super-fine filtration to block leaves and debris, keeping your water clean.

Product Details

• Code: RHML03
• Size: 100mm/4
• Country: Global

The Shark Cage for Maelstrom Original delivers massive amounts of water to your tank. The single skin Shark Cage uses super-fine filtration to block leaves and debris, keeping your water clean. The Shark Cage Filter is the step up from a standard Maelstrom – it’s incredibly easy to clean and handles higher flow rates of water – which means more water in your tank. Installation is as simple as lifting out the plastic filter and dropping in the new Shark Cage.

What’s in the Box?

• Shark cage filter

How it Works

The Shark Cage filter uses super-fine filtration to block leaves and debris, keeping your water clean.

Tools/Materials You May Require

• Adjustable spanner
• Screwdriver

Installation

1. Remove the lid on your Maelstrom unit by undoing the 4 clips around the outside.
2. Remove your existing Maelstrom blue filter by pulling upwards on the black handle.
3. If there is any debris inside your Maelstrom housing, now is a good opportunity to clean it.
4. Fit your new Maelstrom Shark Cage filter by inserting it into your housing. The ideal way to do this is by angling the 2 circular rubber inlets into position first, then pressing down the back of the Shark Cage until it is resting on the ribs of the housing.
5. Note the fitment of your Maelstrom Shark Cage. There is an adjustable bracket at the rear of the filter that allows you to tune the fitment. The filter should fit snugly in position. If required, use an adjustable spanner or screwdriver to adjust the length of the bracket.
6. Replace the lid on your Maelstrom, making sure that all 4 clips are secured.

Maintenance

Regular cleaning of the Shark Cage filter is recommended for optimal performance. Remove the filter and clean it with water.

Compliance

The Shark Cage for Maelstrom Original complies with all relevant standards and regulations.

• AS/NZS 3500.3:2003 Plumbing and Drainage – Stormwater Drainage
• enHealth Council
  • Guidance on the Use of Rainwater Tanks
  • Preventing Mosquitoes Breeding
• HB230: 2008 Rainwater Tank Design and Installation Handbook
• Queensland Health Regulations 1996 (Part 8 – Mosquito Prevention)

Contact Us

For more information or to find out how we can help, just give us a call on +61 7 3248 9600 or visit our website at rainharvesting.com.

SHARK CAGE FILTER UPGRADE FOR MAELSTROM™

1. Remove the lid on your Maelstrom unit by undoing the 4 clips around the outside.
2. Remove your existing Maelstrom blue filter by pulling upwards on the black handle.
3. If there is any debris inside your Maelstrom housing, now is a good opportunity to clean it.
4. Fit your new Maelstrom Shark Cage filter by inserting it into your housing. The ideal way to do this is by angle the 2 circular rubber inlets into position first, then pressing down the back of the Shark Cage until it is resting on the ribs of the housing.
5. Note the fitment of your Maelstrom Shark Cage. There is an adjustable bracket at the rear of the filter that allows you to tune the fitment. The filter should fit snugly in position. If required, use an adjustable spanner or screwdriver to adjust the length of the bracket.
6. Replace the lid on your Maelstrom, making sure that all 4 clips are secured.

Product Specifications

All dimensions are in mm unless otherwise stated.

Maintenance

For best performance, check and maintain your Maelstrom on a regular basis. The required frequency of maintenance will depend on the environment in which your Maelstrom is installed. High debris areas will require more regular maintenance than low debris areas. To determine how frequently maintenance will be required in your location, we recommend inspecting the Shark Cage filter after the first rainfall event and planning your maintenance schedule based on this initial inspection. To clean your Maelstrom, unlatch and remove the lid. Grasp the handle on top of the filter and lift it upward to remove it. Scoop out any large pieces of debris by hand, then use a hose to wash out the Shark Cage filter. If required, you can use a brush to remove any debris. Lift the mosquito-proof screen out and brush or hose off any debris on either side of the screen. Replace the mosquito-proof screen, ensuring it sits securely in place. Reinstall the Shark Cage filter to its position within the filter housing, then replace the lid and secure it with the latches.

A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help.
With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or want to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.

How can we help you?

DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the installation and Operating instructions. This specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirements. Product specifications may change without notice. © Rain Harvesting Pty Ltd
rainharvesting.com

For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com

References

• Cleaner Water. More of it. | Rain Harvesting by BMCo US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>