RAIN HARVESTING DDIV04 Downpipe Diverter Rectangular Installation Guide
- June 10, 2024
- Rain Harvesting
Table of Contents
DDIV04 Downpipe Diverter Rectangular
Downpipe Diverter
Rectangular
The Downpipe Diverter is a rainwater harvesting system that allows you to collect water from your home’s downpipe for use in your garden or home. It comes in two sizes: 100x75mm (Australia) and 100x50mm (USA) or 2×3 (USA) and 3×4 (Australia). The system consists of a Slip Coupling, Flow Diverter, Downpipe Diverter, Leaf Filter, Hose Adaptor, Top Adaptor, and Bottom Adaptor. It is easy to install and maintain.
Installation
To install the Downpipe Diverter, follow these steps:
- Check that you have all the tools and materials required, including a tape measure, marker pen, saw, and spirit level.
- Insert the Downpipe Diverter into the downpipe by cutting out a section of the downpipe and inserting it into the Slip Coupling.
- Attach the Flow Diverter to the Downpipe Diverter using the Hose Adaptor. Make sure that the Flow Diverter is facing in the right direction.
- Attach the Leaf Filter to the top of the Downpipe Diverter using the Top Adaptor.
- Attach the Bottom Adaptor to the bottom of the Downpipe Diverter using a screwdriver.
- Make sure that everything is level and secure.
Maintenance
To maintain the Downpipe Diverter, periodically lift the Slip Coupling to
remove any leaves that may have become lodged on the
Filter. The body of the Downpipe Diverter and the Filter can be easily removed
by hand. After cleaning the unit, simply return it back into place. The
frequency of inspections will depend on the environment around you. For
example, if you are in a high leaf area, inspections should occur more
regularly.
If you need more information or assistance with your Downpipe Diverter, please contact us at +61 7 3248 9600 or visit our website at rainharvesting.com.
PRODUCT DETAILS
The Rectangular Downpipe Diverter captures the water flowing through your
downpipes, while filtering leaves and debris – giving you lots of great
quality rainwater.
It’s the easiest way to start collecting water today.
| Code | Size | Country |
|---|---|---|
| DDIV04 | 100x75mm | |
| 100x 50mm | Australia | |
| DDIV104 | 2×3″ | |
| 3×4″ | USA |
Installation
WHAT’S IN THE BOX?
- Downpipe Diverter
- 12mm (½”) garden hose fitting and seal
- 32mm (1 ¼”) hose fitting and seal
- 1″ NPT adaptor (USA Only)
- Top pipe adaptor
- Base pipe adaptor
TOOLS/MATERIALS YOU MAY REQUIRE
- Tape measure
- Marker pen Saw
- Spirit level
HOW IT WORKS
-
Select a position to install your downpipe diverter which wil allow a smooth path for the hose to your barrel. If you are using the inlet hose to limit the height of water within your barrel, ensure the outlet is below the top of the rain barrel. Mark the lower cut point (A).
- If using 100x75mm pipe, A= Approx. 115mm
- If using 100x50mm pipe, A= Approx. 115mm
- If using 3×4” pipe, A = Approx 3” (76mm)
- If using 2×3” pipe with the included adaptor, A = 5” (127mm)
-
Then mark the top cut, and remove the section of pipe (B). Ensure all cut edges are clean and smooth.
- If using 100x75mm pipe, B= Approx. 217mm
- If using 100x50mm pipe, B= Approx. 238mm
- If using 3×4” pipe, B = Approx. 7 3/8”
- If using 2×3” pipe with the included adaptor, B = Approx. 9 3/8”
-
Determine whether the Flow Diverter will be used to maximum water capture. If you have a rainhead or gutter mesh upstream to filter out large debris, the Flow Diverter is recommended. If you have no upstream rainhead or gutter mesh, do not use the Flow Diverter. You will still catch a high flow of water. The Flow Diverter snaps in/out of the Upper Slip Coupling.
-
Installing the Downpipe Diverter:
100 x 50mm, 100x75mm or 2 x 3” Downpipe-
Slide the Base Adaptor onto the lower section of pipe.
-
Press the Top Adaptor into the Slip coupling.
-
Slide the Slip Coupling/Top Adaptor onto the upper section of cut pipe and hold it in position.
-
Insert the Downpipe Diverter onto the pipe (no glue required). Then lower the Slip Coupling/Adaptor back into position, sliding it into the Diverter.
3 x 4” Downpipe -
Slide the Slip Coupling onto the upper section of cut pipe and hold it in position.
-
Insert the Downpipe Diverter onto the pipe (no glue required). Then lower the Slip Coupling back into position, sliding it into the Diverter.
-
-
Screw on either the 12mm (½”) or 32mm (1 ¼”) hose fitting onto the nozzle.
-
Connect the hose to your rain barrel or rainwater tank as required.
PRODUCT ASSEMBLY
- a. Slip Coupling
- b. Flow Diverter
- c. Downpipe Diverter
- d. Leaf Filter
- e. Hose Adaptor
- f. Top Adaptor
- g. Bottom Adaptor
Product Specifications
Downpipe Diverter
Rectangular
All dimensions are in
mm unless otherwise stated
Maintenance
For the best performance, check your downpipe diverter periodically by lifting
the slip coupling up to remove and leaves which might have become lodged on
the Filter.
The body of the Downpipe Diverter and the Filter can be removed easily by
hand.
After cleaning the unit by brushing or hosing the filter, simply return it
back into place.
The frequency of inspections will depend on the environment around you. For
example, if you are in a high leaf area, inspections should occur more
regularly.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or
wanting to keep the garden green, our simple steps will help you achieve your
goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
For more information or to find out how we can help, just give us a call on:
+61 7 3248 9600
Or visit our website at: rainharvesting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>