RAIN HARVESTING TSEF44 Easy Fit Solid Wall Tank Screen And Solar Shield Kit Installation Guide
- June 10, 2024
- Rain Harvesting
Table of Contents
TSEF44 Easy Fit Solid Wall Tank Screen And Solar Shield Kit
w/Screw Down Ring
Installation Guide
PRODUCT DETAILS
Suitable for any tank type, this tank screen system requires no tools for
maintenance. It means you can easily remove and clean your tank screen to keep
it clean and functioning smoothly.
The kit includes a Solar Shield, which shields your tank from sunlight,
reducing algae growth.
| Code | Size | Country |
|---|---|---|
| TSEF44 | 400mm | Global |
Installation
WHAT’S IN THE BOX?
- Easy Fit Solid Wall Tank Screen
- Easy Fit Solar Shield
- Easy Fit Screw Down Inlet Ring
TOOLS/MATERIALS YOU MAY REQUIRE
- Drill
- Screws
INSTALLATION
- Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is appropriate for your tank material.
- To install the Solar Shield, place it in to the ring so it is suspended in the tank inlet hole with the 3 arms resting in the location features on the ring. If the arms are not properly seated rotate the solar shield until the arms drop into the location features on the ring.
- To secure your Easy Fit Solid Wall Tank Screen, place it over the ring so that the 3 clips on the Easy Fit Solid Wall Tank Screen align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear them click into place. Ensure all 3 clips are secured.
- Install your inlet pipes as close to the bottom screen as possible, whilst still allowing space for debris clearance and removal of the Easy Fit Solid Wall Tank Screen for maintenance.
- To remove your Easy Fit Solid Wall Tank Screen, lift each of the release tabs until they disengage, and the screen can be lifted off.
Product Specifications
Easy Fit Solid Wall Tank Screen and Solar Shield Kit w/ Screw Down Ring
| Country | Code | TANK HOLE SIZE | A | B | C | D |
|---|---|---|---|---|---|---|
| Global | TSEF44 | 364-382 | 420 | 17 | 111 | 362 |
| 14.35″-15.04″ | 16.5″ | 0.7″ | 4.4″ | 14.25″ |
All dimensions are in mm unless otherwise stated.
Maintenance
You should regularly inspect your Easy Fit Solid Wall Tank Screen and remove
any leaves or debris.
For a more thorough clean, simply unclip your Easy Fit Solid Wall Tank Screen
and hose it off before reattaching to your tank.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or
wanting to keep the garden green, our simple steps will help you achieve your
goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product
usage. Further information is available from Rain Harvesting Pty Ltd and from
the installation and Operating instructions. This specification sheet must be
read in conjunction with the installation and Operating Instructions and all
applicable statutory requirement. Product specifications may change without
notice.
© Rain Harvesting Pty Ltd
For more information or to find out how we can help, just give us a call
on
+61 7 3248 9600
Or visit our website at rainharvesting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>