BOULT AUDIO Cosmic R Smartwatch User Manual
- June 10, 2024
- BOULT AUDIO
Table of Contents
Cosmic R Smartwatch
User Manual
Cosmic R Smartwatch
Please read the instructions before use:
- Attach the charging cable to the watch charging port, ensuring the metal pins are fully connected.
- Please use the correct charging adapters which are 5V 1A. If the smartwatch cannot be powered on after being left unused for long time, please clean up the charging metal pins to make sure connecting well.
Know your Cosmic R
What’s
in the box?
Cosmic R smartwatch User manual Magnetic charging cable Warranty card
Product specification
Product Name – Boult Cosmic R
Bluetooth Pairing Name – Boult Cosmic R ”
Screen Size – 1.3″
IP Rating – IP68
Bluetooth Version – V5.0
Bluetooth Range – 10m
Sensors – 3-axis G-Sensor, OPPG HR & Sp02 Sensor
How to wear
Please wear the device on your wrist correctly, about one finger from the
carpal, and adjust it to a comfortable position.
Tip: Please wear the device a little tighter for accurate functioning of
the heart rate monitor.
https://app.moyoung.com/app-download/BoultFit
How to download & connect to ‘BoultFit’ App
-
Long press the side button to turn on the device. Slide down from main interface, open setting and choose App QR code.
Use your mobile phone to scan the code. Or you can also scan above QR code or search for “BoultFit” in App store. -
Open the App and turn your phone’s Bluetooth ON. Search and select the corresponding device on app as guided.
Notes:
- Keep Bluetooth ON while paring to ensure successful connection.
- If you couldn’t find the watch during paring, Long press side button for 5 seconds to get ‘Power off’, ‘Reset’, ‘Restart’ options. Perform watch reset and search again on Boult App.
Tips
- For the first-time connection with Android, “Permissions” reminder will pop-up. Please follow the guidance and allow permissions to ensure all functions work properly.
- Mobile phone system of Android 5.0 or lOS 9.0 or above is recommended.
- Please upgrade the app to the latest version to get a better experience.
- For the first time connection with iPhone, “Pair” reminder will pop-up. Click on Pair, for incoming calls and instant messages to be pushed.
- To connect successfully, please turn on mobile phone’s Bluetooth, GPS and mobile network.
- If the device cannot be searched or connected during use, please reset or turn off the watch and try again.
Operating Instructions
(A). Quick Settings: On the dial interface, swipe from top to
bottom.
(B).
Notification: On the dial interface, swipe from bottom to top.
(C).
Shortcut menu: On the dial interface, swipe from left to right.
(D). Steps, heart rate, sleep, and other interfaces – On the dial
interface, swipe from right to left.
(E).
Quick Access To Change Watch Faces: Long press on the watch screen, and slide
left or right to choose watch faces.
(F). Power ON/OFF: Long press side button for 5 seconds to Power ON / to
get power OFF options.
(G). Normal operation: Press the side button to return back to previous
page. On main page, press the side button to turn on/off the screen.
Function introduction
Sports: Record daily steps, distance, and calories. More details can be
viewed in app.
Sleep: Keep track of your sleep hours and learn about your sleep quality.
More details can be viewed in App.
Breathe: Inhale and exhale; follow the prompts to complete deep breath.
Heart rate monitoring: Click on heart rate page to measure heart rate.
More App monitor operation and test data can be viewed in the App.
Weather: Displays the current weather status as well as the
forecast for the next day. Make sure Bluetooth is connected correctly. 
Blood
pressure monitor: Record your blood pressure status. More details can be
viewed in the App. The value is for reference only and cannot be used as a
medical basis.
Blood oxygen monitor: Record your blood oxygen status. More details can
be viewed in the App. The value is for reference only and cannot be used as a
medical basis.
Message: Instant message reminders from Twitter, Facebook, WhatsApp,
Instagram, and more. (Requires permission to turn it on in the App side)
Al
voice assistant: After successfully connecting the App & Bluetooth
functions, the user can utilize the Al voice assistant to run the phone by
using the phone’s “wake up” word, for example, “Xiao Ai” works for Xiaomi
phones.
BT
Camera Control: After connecting to the phone, the watch can be used as a
remote control for the phone’s camera. Click on the watch camera control page
to control the phone camera shutter.
Remind
to Drink: The device will remind you to drink water at scheduled time
intervals. More details can be viewed in app.
Remind to Move: The device will remind you to move after one hour of
resting. More details can be viewed in app.
Stopwatch: Lets you Record time easily. More details can be viewed in
app.
Alarm
clock: You can set 3 alarm clocks at the same time. More details can be
viewed in app.
Sport modes: Start training by clicking on the training icon, and choose
from varied sports modes.
Music control: Connected to the App. Access the Play/Pause/ Previous/Next
and volume controls on the phone.
Theater Mode: The device will automatically turn off the vibration and
turn down the brightness when in theater mode.
Brightness adjustment: Brightness or darkness can be adjusted.
Power on/off: Press and hold the side button for 3 seconds on the dial
page.
Power saving mode: When turned on, the brightness drops to the lowest
level, and the incoming message does not vibrate to remind.
Do not disturb: After turn it on, the watch will no longer receive
messages.
Menu view: The style of the main menu can be switched, and it can be
switched to grid view or list view.
Dial switch: Long pressing the main page, you can slide left and right to
select and set the dials.
Restart: Restart the watch in settings. Version: Displays the Bluetooth
name and version number.
Reset: Restores factory settings.
APP download: Scan the QR code to download the APP.
https://app.moyoung.com/app-download/BoultFit
Scan & Download ‘BoultFit’ App
Other functions: Stopwatch, alarm, timer, brightness, mute on/of, theater
mode, factory reset, power off and about.
Using in Wet Conditions: Your gadget is water-resistant, which means it
can withstand even the sweatiest workout while remaining splash- and rain-
proof.
NOTE: Do not wear your Smart Bracelet when swimming. Additionally, even
while bathing with your wristband won’t harm it, wearing it constantly
prevents your skin from getting enough oxygen. When your bracelet gets wet,
properly dry it before re-putting it on.
Using Quick View: With Quick View, you can view the time or a message
from your phone on your smart bracelet without taping. Simply turn your wrist
in your direction, and the time screen will appear for a brief period of time.
Warranty
-
One-year warranty for default hardware defectives, charging cable.
-
Below reasons for defects are not included in free warranty service:
(1) Personal assembling or disassembling.
(2) Damage due to dropping the product during use.
(3) All man-made damages or due to the third party’s fault, improper use ( such as: water in the smartwatch, external force shattering, scratches during use, etc.) -
Please provide the warranty card and contact with direct dealers for warranty service.
-
Please note that all the functions of the product are based on physical objects.
Notes:
- To ensure water resistance works right, please DO NOT:
(1) Wear the watch during swimming, hot shower, or drop hot tea and other corrosive liquids.
(2) Remove any screws or buttons.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>