Boult Audio ProBass MuseBuds Bluetooth Headset User Manual

ProBass MuseBuds Bluetooth Headset
User Manual

For a better sound quality experience, suggest using 10S 8.0/ Android 4.3 or above operating system.

Product Introduction

Charging the Case

• Use only SV/1 A USB charger to charge this product.
• The led light flashes green while charging, The green light keeps constant after fully charging. constant on after fully charging.

Activating Earbuds and Charging Earbuds

• Put both earbuds into the charging case to activate and charge them. (pins need to be well-contacted).
  The LED light will turn on red while charging and it turns off when the earbuds are fully charged.
  

TWS Pairing and Connection with Cell Phone

Take both earbuds out of the case at the same time and they will auto-power on after 2-3 seconds. Both earbuds will auto pair, at this moment the light on one earbud flashes blue and the light on the other earbud flashes red & blue alternately.
Search for “Boult Audio Musebuds” on your cellphone and tap to connect both earbuds with your cellphone. Please insert both earbuds into the charging case and repeat the above steps if the earbuds fail to connect.

Wearing Earbuds

Functions

• Power-on
  Method 1: Take out both earbuds and they will auto-power on. (LED light turns on Blue)
  Method 2: Press MFB for 2s to power on (LED light turn on blue)

• Power-off
  Press and hold MFB for 4s to power off(LED turns on red for 2s)
  

• Reject Call
  Press MFB for 1s to reject an incoming call.
  

• Answer Call/Hang off
  Press MFB to answer an incoming call and press again to hang off it.
  

• Playback/ Pause
  When playing music, press MFB to pause it and press again to play it.
  

• Voice Assistant
  When standby, press and hold MFB for 1s untill the “beep” sound happen to activate the voice assistant( Like Siri).
  

• Next Song/Previous Song
  When playing music, double press MFB on any earbud to skip track backward(previous song), double press MFB on any earbud to skip forward(next song)
  

• Increase/Decrease volume
  When playing music, press MFB on any earbud 3 times to get the volume down or up.
  

( If Earbuds fail to connect with cellphone, no sound in the left earbud or right earbud)

• Take both earbuds out of the case. Press and hold the MFBs for 5 seconds(as the below picture shows) in power off mode.
  Don’t release your fingers untill the LED light flashes red & blue alternately. When the LED light of both earbuds flashes red & blue alternately, Tap 4 times the MFB of the right (R) earbud.
  Both earbuds will auto pair after 3-5 seconds, at this moment the light on one earbud flashes blue and the light on the other earbud flashes red & blue alternately.

• Delete the pairing name from the pairing list in the cellphone, search for “Boult Audio Musebuds” in the cellphone, and tap to connect both earbuds with a cellphone.

• Please put both earbuds into the charging case and repeat above steps if earbuds fail to connect.
  

Attention

• If the earbuds are left unused for over two weeks, please recharge it periodically.

• Be sure to use a 5V DC,1A charger made by a quality manufacturer.

• Ensure that the distance between your device and the earbuds is not too far away, Ensure that nothing is blocking the signal between your device and the earbuds.

• The implementation of the earbuds function will be different due to different protocols supported by different wireless devices.

• Don’t disassemble or modify your earbuds for any reason to avoid any damage and danger. Don’t overcharge to avoid the outbreak of a fire. Avoid exposing the earbuds to extreme temperatures(below 0℃ or above 45℃). Extreme temperatures can cause deformation of earbuds components and reduce battery life and the life span of your earbuds.
  Don’t put the device’s LED lights close to humans’ or animals’ eyes. Do not use the earbuds during a thunderstorm.
  Thunderstorms can cause serious malfunction and increase the risk of electric shock.

• Do not clean the earbuds with harsh chemicals or strong detergents.

• Please follow our company’s operating instructions. If any damage or danger is caused due to improper use, the responsibility shall be undertaken by the operator.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>