Boult Audio ProBass Curve-X Bluetooth Wireless in Ear Earphones with Mic User Manual
- June 4, 2024
- BOULT AUDIO
Table of Contents
Boult Audio ProBass Curve-X Bluetooth Wireless in Ear Earphones with Mic
For better sound quality experience, suggest use IOS 8.0/ Android 4.3 or above
operating system.
Please refer to the Safety Precautions mentioned on the last page of this
manual before operating this device.
Pairing for the first time
-
Step 1: Make sure the product is fully charged.
-
Step 2: Press and hold the multi-function button for 5-6 seconds (approximately) to power-on the neckband. The neckband will indicate with red & blue flashing LED light.
Now, the neckband is in paring mode & ready to connect with your device. -
Step 3: Turn-on the bluetooth on your device & scan until you see ”Boult Audio Probass”
-
Step 4: Click on “Boult Audio Probass” and pair your device with the neckband. Once paired, the neckband will indicate with blue lashing LED light.
Now, you can enjoy your music & calls.
Auto-pairing Mode (Re-pairing with your device)
- Step 1: Turn-on the bluetooth on your device.
- Step 2: Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the Neckband.
- Step 3: The neckband will connect to your same device automatically. If not, connect to “Boult Audio Probass” in the bluetooth settings on your device.
Product Introduction
Charging the neckband
- Use only 5V/1A USB charger to charge this product.
- This product or the bluetooth functions cannot/should not be used during charging.
- This neckband will indicate with quick flashing red LED light when the neckband’s battery need to be charged.
- Solid red LED light will indicate on the neckband while charging.
- Solid blue LED light will indicate on the neckband once charging is complete.
Functions
-
Voice assistance
- Click on the multi-function button for 2 seconds to activate the Google assistant/Siri.
- Google assistant/Siri will pop up on your phone screen.
-
Play/Pause music
Single click on the multi-function button to play/pause the music. -
Answer/End/Reject calls
- Single click on the multi-function button to answer/end a call.
- Press & hold the multi-function button for 2 seconds to reject the incoming call.
-
Redialing the last call
Double click on the multi-function button to redial the last phone number on your mobile phones dialing list. -
Change music track
- Press & hold the (-) volume button for one second to change the music track to the previous track.
- Press & hold the (+) volume button for one second to change the music track to the next track.
-
Increase/Decrease volume
- Single click on the (-) volume button to decrease the volume.
- Single click on the (+) volume button to increase the volume.
-
Switch ON/OFF
- Press and hold the multi-function button for 3-4 seconds (approximately) to power-on the neckband. powered-on.
- Press and hold the multi-function button for 3-4 seconds (approximately) to power-off the neckband. in Switch on/off section.
Safety Precautions
Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the neckband.
- Please keep this device away from extreme heat, humidity or corrosive environment.
- Please don’t over-charge the neckband as it will decrease the service life of battery.
- Please use only a good quality phone charger (5V/1A) or
- This product or the bluetooth function should not be used during charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>