RAIN HARVESTING TATO33 Flanged Tank Overflow Installation Guide
- June 10, 2024
- Rain Harvesting
Table of Contents
RAIN HARVESTING TATO33 Flanged Tank Overflow
RAIN HARVESTING by Blue Mountain Co
Flanged Tank Overflow Corrugated Tank
PRODUCT DETAILS
A flanged overflow fitting for use with corrugated tanks. The flange provides an ample surface for sealant and fasteners, and the standard fitting matches with our range of mosquito proof screens and standard plumbing fittings.rainharvesting.com
Installation
WHAT’S IN THE BOX?
Tank Overflow Standard (for Corrugated Tanks)
TOOLS/MATERIALS YOU MAY REQUIRE
- Marker pen
- Hole saw
- Silicone
- Screws
- Screwdriver
NOTE: If space is available consider a High Level Tank Overtlow to increase the storage in your rain water tank.
TANK OVERFLOW CORRUGATED
- you do not nave an exISTing tank overfiow nole in your tank, use your corrugated overfiOw as a template to mark the size of the hole you need to cut in the sIde of your tank, then cut using a holesaw. Ensure that the bottom of the hole you cut sits lower than the bottom of the tank inlet and/or tank inlet Screen. 2-
- Apply silicone to the flange on your tank overflow, push it into the tank overtlow hole, then screw in place through the provided screw hole guides.
Product Specifications
Fitting guide:
- F Female/ Socket Fitting
- M Male/Spigot Fitting (Pipe size)
- IP In-Pipe Fitting
Maintenance
When properly installed, your tank overflow should be maintenance-free.
We recommend pairing your tank overtlow with a mosquito-proot screen or flap
valve to prevent mosquitoes and other pests entering your tank through the
overtlow outlet.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help. With some thought, your rain harvesting system can provide you
with cleaner water and lots of it. Whether you’re completely reliant on tank
water or wanting to keep the garden green, our simple steps will help you
achieve your goal. The Rain Harvesting approach to rainwater collection
involves using tested and proven products to make quality rainwater available
for use in and around your property. You don’t need much to get started and
you will be surprised how easy it is to get the most out of your rainwater
system.
How can we help you?
DISCLAIMER
product specification is not a complete guide to product usage. Further
information Is available from Rain Harvesting Pty Ltd and From the
installation and Operating Instructions. Inis specification sheet must be read
in conjunction with the installation and Operating instructions and all
applicable statutory requirements. Product specifications may change without
notice. O Rain Harvesting Pty Ltd
For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
rainharvesting.com