RAIN HARVESTING TAVK02 Auto Tank Vac Concrete Tank Installation Guide
- June 10, 2024
- Rain Harvesting
Table of Contents
RAIN HARVESTING TAVK02 Auto Tank Vac Concrete Tank
PRODUCT DETAILS
Automatically remove sediment from the bottom of your tank to improve your rainwater quality and reduce sediment resuspension.
- Code/Size/Country
- TAVKO2
- Australia
- 90mm
Installation
WHAT’S IN THE BOX?
- 1x 90-degree elbow with anti-siphon vent
- 1x 9Omm threaded coupling (upper coupling)
- 1x 90mm threaded coupling (bottom-toothed coupling)
- 1x 90mm male pipe
TOOLS/MATERIALS YOU MAY REQUIRE
- Marker pen
- Tape measure
- Saw
- Solvent weld glue
- Screwdriver
- Screws
INSTALLATION
- If you do not have an access hole above your tank overflow outlet, your Automatic Tank Vacuum will need to be installed from the inside of your tank, which must be empty. If this is the case, ask a licensed trade professional to install your tank vacuum.
- Assemble the Automatic Tank Vacuum following Steps 2-5 outlined above. Please note that supplied in the 90mm Concrete kit will be a 90-degree plain elbow in lieu of the flange version.
- Solvent weld glue the socket of the 90-degree elbOw and assembled Automatic Tank Vacuum, to the 90mm pipe of your overflow outlet on the inside of your tank. if your tank overflow uses a socket overflow outlet, utilize the short section of 90mm pipe included in your kit and use solvent weld glue to install.
- We recommend installing an insect-proof flap valve and Leaf Catcha or Air Gap at the pipe outlet. This will prevent pests from entering your tank via the tank vacuum and will also complement the anti-siphon vent to further prevent siphoning.
Product Specifications
- Fitting guide:
- F- Female / Socket Fitting
- M= Male / Spigot Fitting (Pipe size)
- IP = In-Pipe Fitting
Maintenance
No maintenance is required. Your Automatic Tank Vacuum is designed to reduce maintenance as it sucks sediment-laden water from the bottom of your rainwater tank and expels it through the tank overtiow.
supported by RAIN HARVESTING
- A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume or quality-of water that you require. That is where we can help.
- With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal.
- The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property.
- You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system. How can we help you?
COMPLIANCE
- AS/NZS 4020:2005 Testing of products for use in contact with drinking water
- DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the
Installation and Operating
- Instructions. Ihis specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. O Rain Harvesting Pty Ltd rainharvesting.com
- For more information or to find out how we can help, just give us a call on
- +61 7 3248 9600
- Or visit our website at rainharvesting.com
Documents / Resources
| RAIN
HARVESTING TAVK02 Auto Tank Vac Concrete
Tank
[pdf] Installation Guide
TAVK02 Auto Tank Vac Concrete Tank, TAVK02, Auto Tank Vac Concrete Tank, Vac
Concrete Tank, Concrete Tank
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>