RAIN HARVESTING TATO111 Flanged Tank Overflow Kit Installation Guide
- June 10, 2024
- Rain Harvesting
Table of Contents
Flanged Tank Overflow Kit
High Volume
Installation and Specification Guide
PRODUCT DETAILS
An all-inclusive overflow solution for your tank to keep out pests and
increase your tank’s capacity.
The extra high bend on the inside of this overflow raises the overflow level
of your tank, which instantly increases the volume of water you can store.
It’s the quickest way to boost your storage capacity. The mosquito proof
screen keeps pests at bay and protects your tank.
| Code | Size | Country |
|---|---|---|
| TATO11 | 90mm | Australia |
| TATO111 | 3″ SDR35/SCH40 | USA |
| TATO211 | 80mm | New Zealand |
| TATOS311 | 80mm | South Africa |
Installation
WHAT’S I N THE BOX?
- Tank Overflow High
- Mazie Stopper Fixed Screen
- Rubber gasket
- 6 Stainless Steel screws
TOOLS/MATERIALS YOU MAY REQUIRE
- Marker pen
- Holesaw
- Drill.
- Screwdriver
- Sealant
- Solvent Weld glue
TANK OVERFLOW KIT
- If you do not have an existing tank overflow hole i n your tank, use your tank overflow outlet as a template to mark the size of the hole you need to cut i n the side of your tank, then cut using a hole saw. Ensure that the bottom of the hole you cut sits lower than the bottom of the tank inlet and/or tank inlet screen.
- Ensure that the gasket i s fitted firmly around the tank overflow fitting, then push it i n place inside the tank overflow hole orientated so that the bend faces up.
- If you have an existing tank overflow hole and doing this means the open end of the bend will sit above the level of the tank inlet and/or tank inlet screen, orient the bend diagonally or trim the top of the overflow first.
- Hold the overflow outlet as you screw it in place, applying equal force to each screw. We recommend alternating between each screw, screwing on opposite sides, and avoiding fully tightening the screws until the end. Be sure not to overtighten the gasket.
- To install your Mazie Stopper Fixed Screen, simply press into your tank overflow outlet. DO NOT GLUE I T IN PLACE.
Product Specifications
Flanged Tank Overflow Kit High Volume
| COUNTRY | CODE | A | B | C | D | E | F | Recommended Hole Size |
|---|---|---|---|---|---|---|---|---|
| Australia | TATO11 | 90 F | 129 | 157 | 98 | 44 | 23 | 95 |
| USA | TATO111 | 3″ SCH40 F /SDR35 F | 5.08″ | 7.20″ | 3.86″ | 2.76″ | 0.79″ | 3.75″ |
| New Zealand | TATO211 | 80 F | 129 | 177 | 98 | 69 | 20 | 95 |
| South Africa | TATO311 | 80 F | 129 | 177 | 98 | 69 | 20 | 95 |
All dimensions are in mm unless otherwise stated.
Fitting guide:
F = Female / Socket Fitting
M = Male / Spigot Fitting (Pipe size)
IP = In-Pipe Fitting
Maintenance
We recommend regularly cleaning your Mazie Stopper to prevent the mosquito-
proof screen from becoming clogged o r blocked with sediments and debris.
Mozzie Stoppa Fixed Screen
To clean, remove your Mazie Stopper Fixed Screen from your tank overflow
outlet and hose or otherwise clean the mosquito-proof screen. Replace the
Mazie Stopper Fixed Screen immediately after cleaning by pressing it back into
your tank overflow outlet.
A common misconception about collecting rainwater i s that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – o r quality – of water that you require. That i s
where we can help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water o r
wanting to keep the garden green, our simple steps will help you achieve your
goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use i n and around
your property. You don’t need much to get started and you will be surprised
how easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to
product usage. Further information i s available from Rain Harvesting Pty Ltd
and from the Installation and Operating Instructions. This specification sheet
must be read in conjunction with the Installation and Operating Instructions
and all applicable statutory requirement. Product specifications may change
without notice. © Rain Harvesting Pty Ltd
For more information or to find out how we can help, just give use call
on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
Documents / Resources
| RAIN
HARVESTING TATO111 Flanged Tank Overflow
Kit
[pdf] Installation Guide
TATO111 Flanged Tank Overflow Kit, TATO111, Flanged Tank Overflow Kit, Tank
Overflow Kit, Overflow Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>