ALPHACOOL ES Geforce RTX 4090 with Backplate Instruction Manual
- June 10, 2024
- ALPHACOOL
Table of Contents
ES GeForce RTX 4090 with Backplate
Instruction Manual
Safety instructions
https://www.alphacool.com/download/SAFETY%20INSTRUCTIONS.pdf
Digital guide
https://www.alphacool.com/m/?ac=13395
Accessories
Check compatibility
Before starting the cooler assembly, compare your card with the pictures in
our configurator. To do so, visit https://www.hwconfig.com and search for
your graphics card or cooler model. For a definitiv identification, you can
also compare the PCB number. The cooler was designed for a special PCB layout.
Occasionally, graphics card manufacturers may revise the design of their card
slightly, causing the cooler not to fit on later models. During assembly,
please make sure taller parts have enough space around them and that the
cooler does not damage your graphics card.
Alphacool International GmbH is not liable for assembly errors occurring due
to negligence, such as selecting an incompatible cooler.
Prepare graphics card
Put the hardware on an antistatic mat. Begin dismantling the original cooler.
Depending on the structure of the cooler, remove the screws at the back of the
card and carefully unhook the fan connector first. If the original cooler uses
thermal glue, extreme care should be taken as you can easily damage parts.
Pick up all the items carefully. Next, clean the hardware of thermal paste or
pad residues with a solvent (e.g. isopropanol alcohol).
Place thermal pads on cooling block Apply thermal Grease Install
PCB Install PCB and PCI Brocket Place thermal pads on PCB backside
Mount backplate
Need help?
Alphacool International GmbH
Marienberger Str. 1 D-38122 Braunschweig Germany
Support: +49 (0) 531 28874 – 0
Fax: +49 (0) 531 28874 – 22
E-mail: info@alphacool.com
https://www.alphacool.com