beper P206VEN100 Stand Fan User Manual
- June 10, 2024
- beper
Table of Contents
beper P206VEN100 Stand Fan
Product Information
Ventilatore Piantana/Stand Fan
The Ventilatore Piantana/Stand Fan is a versatile and efficient appliance
designed for household use. With a power of 35W and an operating voltage of
220V~ 50Hz, this fan delivers a high-quality cooling experience. It features a
front grille, locking hooks, fan stopper, fan blade, rear grille, motor shaft,
oscillation pin, motor body, tilt adjustment pin, night light, control panel,
screw for tube attachment, internal tube, external tube, height adjustment
knob, base ornament pin and base support.
Product Assembly Instructions
- Place the base support on the floor.
- Insert the internal tube into the external tube until it protrudes.
- Insert the base ornament pin and attach the height adjustment knob.
- Attach the external tube to the base support using the four screws provided.
- Lower the base ornament pin.
- Pull out the internal tube and adjust it to the desired height.
- Tighten the height adjustment knob firmly.
- Slide the control panel onto the tube completely.
- Tighten the screw so that the panel is securely attached to the internal tube.
- Place the rear grille in contact with the motor body flange so that the grille holes are aligned with the pins located on the fan motor body.
- Tighten the rear grille stopper firmly so that the grille is locked to the motor body.
- Attach the fan blade onto the motor shaft and tighten the fan stopper firmly onto the motor shaft to lock the blade to the motor body.
- Join the two front and rear grilles by inserting the locking hooks located on the front grille onto the rear grille. Close the hooks to lock the grilles securely.
Product Usage
Once the assembly is complete, plug in the Ventilatore Piantana/Stand Fan and turn it on using the control panel. Adjust the fan speed, oscillation and tilt according to your preferences. Keep the appliance away from water or any other fluids to avoid electric shock. Do not use the fan near explosions, highly flammable materials, gases or burning flames. It is recommended to keep the appliance out of reach of children.
For further information regarding usage in other languages, please refer to
the user manual provided or visit the manufacturer’s website at
beper.com.
For technical assistance or queries, contact the manufacturer’s customer
service team at assistenza@beper.com.
Precautions
Read the following instructions carefully, since they give you useful safety information about installation, use and maintenan-ce and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing ma-terial in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually infor-mation to the manager of the Sanitation Department of your own mu-nicipality.
If the supply cord is damaged, it must be replaced by the manufac-turer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable
plug by qualified personnel only, which shall also ensure that the section of
the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manu-facturer cannot be responsible for any damages deriving from impro-per, wrong or incautious use.
This appliance is for household use only. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
- Do not use the appliance near explosives, highly flammable mate-rials, gases or burning flames.
- Do not allow children, disabled people or every pe- ople without experience or technical ability to use the appliance if they are not properly watched over.
- Close supervision is necessary when any appliance used by or near children.
Some warnings
- Do not plug the supply cord before assembly every parts of the fan. Before using, check the integrity of the supply cord and eventually remove possible nodes.
- Place the fan on a flat and stable surface in a dry place.
- Keep away to a reasonable distance the fan from walls, doors, win-dows or every object that could avoid the appliance to work in the correct way.
- Do not cover the body or grid of the fan when the appliance is wor-king.
- Do not plug objects into the grid or inside the appliance.
- Do not pull on the supply cord to unplug the appliance.
- After using the fan, unplug the cord supply.
- If the fan must be stored for a long period or non-used, replace the fan in the original packaging in a dry place. For every next use, check that the fan is clean and that the blades turn in the correct way (motor off).
Description of the item
- Front grid
- Closure nut
- Nut blades
- Blades
- Rear grid nut
- Rear grid
- Motor
- Swing button
- Body motor
- Inclination set button
- Night light
- Control panels
- Screw for pipe
- Inner pole
- Outer pole
- High adjustment handle
- Base fastening screws
- Base ornamental pin
- Base
Assembly instructions
- Put the base on the floor.
- Insert the inner pole inside the outer pole.
- Insert the base ornamental pin and fix the high adjustment handle.
- Fix the pouter pole to the base with the 4 screws (included in packaging).
Important: firmly fasten the screws to the base in order to guarantee the good stability of the fan, otherwise the fan will dangerously swing.
- Take off the outer pole, and adjust it to the desired height. Securely fasten the high adjustment handle.
- Place the control panel on the pole.
- Fasten completely with the screw, so that the control panel is well fixed onto the inner pole.
- Place the rear grid on the motor, so that the holes of the grid are well inserted into the motor of the fan. Firmly and securely fasten the rear grid in order to block the grid on the motor.
- Insert the blades of the fan on the motor and completely screw the nut blade on the motor, in order to block the body motor.
- Assembly the 2 grids (front and rear) by inserting the closure nut, place the front grid on the rear grid.
- Close the nuts to block the grids.
Speed selection
- Choose the desired speed by pressing on the buttons of the control panel.
- Position 0 the fan is off.
- Position 1 for low speed.
- Position 2 for medium speed.
- Position 3 for high speed.
- When the fan is on, the night light switches on.
Head inclination
- It is possible to choose various positions and change the air flow direction.
- Before adjusting the inclination, switch off the fan.
- Take the motor body, unscrew the regulation axis and change the inclination of the fan as desired; then fasten firmly.
Warning: do not try to force the inclination position in order to avoid any failure.
Swing function
- When pressing the swing button, it is possible to activate or deactivate the swing function, by pressing the swing pin. Swing function provides a more even distribution of air flow in the room.
- To activate the swing function, push the swing pin down until completely blocked; the head fan turns automati-cally from right to left.
- To deactivate the swing function, raise the pin completely.
Cleaning
- Before cleaning, switch off and unplug the fan.
- For cleaning use a soft cloth, that may be slightly damp.
- Do not use alcohol or chemical substances, or any detergent that could damage this appliance.
- Do not spray water or other liquids on the fan in order to protect it.
- After cleaning, dry every part before using the appliance.
- During the winter and when not used, keep this appliance in a dry and clean place.
Technical data
- Power: 35W
- Power supply. : 220V~ 50Hz
For any improvement reasons, beper reserves the right to modify or improve the product without any notice
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase, a 24-month guarantee applies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of a claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office to preserve the appliance’s efficiency and NOT void the guarantee. Any
intervention on this appliance by non-authorized persons will automatically
void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise, it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or have visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beper reserves the right
to replace only the very part in a question and not the entire product
QR SCAN
CUSTOMER CARE BEEPER
MONTAGGIO ASSEMBLING
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will
forward your enquiries to your distributor.
For further information and/or for instructions for use in other languages ,
please visit: beper.com
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com