DOSTMANN H560 DewPoint Pro Digital Thermo-Hygrometer Instruction Manual
- June 10, 2024
- DOSTMANN
Table of Contents
H560
DewPoint Pro
5020-0560
Operating Instruction
www.dostmann-electronic.de
Introduction
Dear Sir or Madam,
Thank you very much for purchasing one of our products. Before operating the
data logger please read this manual carefully. You will get useful
information for understanding all functions.
Kindly note / Safety Instructions
- Check if the contents of the package are undamaged and complete.
- Remove the protection foil above the display.
- For cleaning the instrument please do not use an abrasive cleaner only a dry or moist piece of soft cloth. Do not allow any liquid into the interior of the device.
- Please store the measuring instrument in a dry and clean place.
- Avoid any force like shocks or pressure to the instrument.
- No responsibility is taken for irregular or incomplete measuring values and their results, the liability for subsequent damages is excluded!
- Do not use the device in explosive areas. Danger of death!
- Keep these devices and the batteries out of reach of children.
- Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
- Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
- Low batteries should be changed as soon as possible to prevent damage caused by leaking. Never use a combination of old and new batteries together, nor batteries of different types.
- Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.
Delivery contents
- Measuring device
- Operating instructions
Operation
Before switching on the instrument insert the bat tery.
Switching on and off
By operating the ON/OFF- key the instrument switched on or off. For switching off please keep the ON/OFF- key pressed for appr. 3 seconds.
Functions
-
Measuring unit switching °C and °F (Celsius /Fahrenheit)
To change the measuring unit push 0°C/°F-key once. -
CAL-option (how to adjust the instrument)
Press down Max/Min key and Clear key together down for 5 seconds, the display will show 0% only. You enter the calibration mode. Press Td/Tw key, will see the display change from 0% to 1%, 2% etc. Select the compensation you want say 2 % then press Max/Min to exit. All the humidity value will be add 2%.
When in calibration mode as above, press Clear key once, you enter the calibration of temperature. Press Td/Tw key to select the value of compensation. -
Display MAX/ MIN
Press down MAX/MIN-key, the display will show the highest humidity and temperature measurement; after pushing again the key the display will show the lowest measurements.
Clearing the memory (MAX MIN)
Press CLEAR/AUTO key in the MAX- and in the MIN-Mode to delete MAX/MIN-memory. -
HOLD
Press HOLD key to freeze the actual display measurement.
Press HOLD key again to release. -
AUTO-OFF-function
To enable the AUTO-OFF-function press down CLEAR/AUTO key for appr. 3 seconds. On the display appears AUTO OFF.
The instrument will switch off automatically after 15 minutes without pressing any key. Pressing the AUTO-OFF key again the instrument will not switch off automatically. -
Display Td/Tw (dewpoint/wetbulb temperature)
Press Td/Tw key once: On the second line the actual dewpoint temperature will be displayed. Press Td/Tw key once again: On the second line the actual wetbulb temperature will be displayed.
Power supply / Changing the battery
For the power supply of the instrument two 1,5 Volt bat tery (AAA size) are used. To exchange the batteries switch off the instrument and open the battery cover on the back of the instrument. Replace the used batteries with new ones. When the instrument displays the „BAT“ segment, it indicates that the batteries need replacing and the instrument allows app. 1 hour of further measurement time.
Note: For protection of our environment please dispose of the batteries according to current local regulations.
Technical data
Temperature
Measuring range: -40°C – +70°C
Display resolution: 0,1°C
Humidity
Measuring range: 0 – 99%rF
Display resolution : 0,1%
Working temperature: -40°C – 70°C
Battery life time: Typical 1000 hrs by continuously use
Battery: 2 x 1,5 Volt AAA size
Dimensions: 170 x 50 x 17 mm
Weight: 100 gr. (incl. packaging)
Functions: Max/Min/Hold-Function, dewpoint, wetbulb, calibration
certificate as an option, C/F-switchable
Explanation of symbols
This sign certifies that the product meets the requirements of the EEC directive and has been tested according to the specified test methods.
Waste disposal
This product and its packaging have been manufactured using high-grade
materials and components which can be recycled and reused. This reduces waste
and protects the environment. Dispose of the packaging in an environmentally
friendly manner using the collection systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable batteries from the
device and dispose of them separately. This product is labelled in accordance
with the EU Waste Electrical and Electronic Equipment Directive (WEEE). This
product must not be disposed of in ordinary household waste. As a consumer,
you are required to take end-of-life devices to a designated collection point
for the disposal of electrical and electronic equipment, in order to ensure
environmentally-compatible disposal. The return service is free of charge.
Observe the current regulations in place!
Disposal of the batteries
Batteries and rechargeable batteries must never be disposed of with household
waste. They contain pollutants such as heavy metals, which can be harmful to
the environment and human health if disposed of improperly, and valuable raw
materials such as iron, zinc, manganese or nickel that can be recovered from
waste. As a consumer, you are legally obliged to hand in used batteries and
rechargeable batteries for environmentally friendly disposal at retailers or
appropriate collection points in accordance with national or local
regulations.
The return service is free of charge.
You can obtain addresses of suitable collection points from your city council
or local authority. The names for the heavy metals contained are: Cd =
cadmium, Hg = mercury, Pb = lead. Reduce the generation of waste from
batteries by using batteries with a longer lifespan or suitable rechargeable
batteries. Avoid littering the environment and do not leave batteries or
battery-containing electrical and electronic devices lying around carelessly.
The separate collection and recycling of batteries and rechargeable batteries
make an important contribution to relieving the impact on the environment and
avoiding health risks.
WARNING! Damage to the environment and health through incorrect disposal
of the batteries!
DOSTMANN electronic GmbH
Mess- und Steuertechnik
Waldenbergweg 3b
D-97877 Wertheim-Reicholzheim, Germany
Phone: +49 (0) 93 42 / 3 08 90
E-Mail: info@dostmann-electronic.de
Internet: www.dostmann-electronic.de
Technical changes, any errors and misprints reserved
● Reproduction is prohibited in whole or part StandvonM 2005 CHB03
● © DOSTMANN electronic GmbH
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>