Babyliss BAB2469U Titanium Expression Deep Hair Waver Instruction Manual
- June 4, 2024
- BaByliss
Table of Contents
TITANIUM
EXPRESSION
DEEP WAVER
Instruction Manual
TITANIUM EXPRESSION
BaByliss PRO has been at the forefront of hair styling innovation and
inspiration for over 50 years. We produce innovative, professional products
engineered with demanding session and salon performance in mind.
With our Titanium Expression range, you can create any look from session to
the salon. Our stylers feature Titanium Ceratherm™ technology; a combination
of premium titanium with a fast-action ceramic heating system to give
consistent, even heat that you can rely on for a perfect finish.
Premium titanium with a fast-action ceramic heating system delivers constant, regulated temperature and instant heat transfer for fast, long-lasting results.
SAFETY CAUTIONS
- Original instructions. Read these safety precautions carefully before using the unit! This appliance should only be used as described within this instruction booklet. Please retain them for future reference.
WARNING! BURN HAZARD: THIS APPLIANCE GETS HOT!
- ALWAYS keep out of reach of children (during and after use and whilst cooling).
- Always take extra care if used on children or near children.
- Do not use it on very young children.
IMPORTANT SAFETY
-
UK Only: This appliance must not be used in the bathroom.
-
Outside the UK: If using the appliance in a bathroom, unplug it after use as the proximity of water can be dangerous even if the appliance is switched off. For additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
-
WARNING! Do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
-
Do not immerse the appliance into water or other liquids.
-
Always inspect the appliance before use for noticeable signs of damage. Do not use it if damaged, or if the appliance has been dropped. In the event of damage, discontinue use immediately.
Contact the Conair Customer Care Line (refer to the ‘UK After Sales Service’ section for further information). -
Do not use the appliance if the lead is damaged. In the event of damage, discontinue use immediately. If the lead is damaged it must be replaced by the manufacturer. Return the appliance to the Customer Care Centre (refer to the ‘UK After Sales Service’ section for further information). No repair must be attempted by the consumer.
-
Do not leave the appliance unattended when switched on or plugged in.
-
During use, do not place the appliance on any heat-sensitive surface, even when using the heat mat provided.
-
WARNING! Only hold the handle during use. Do not touch the hot surfaces of the appliance when in use as these can be extremely hot.
-
Take care to avoid the hot surface of the appliance coming into direct contact with the skin, in particular the eyes, ears, face, and neck.
-
In the event of the appliance being left switched on, the appliance will automatically shut off after 72 minutes. If you wish to continue using the appliance after this time, simply press the ‘I/0’ button, to turn the power on.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand, the hazards involved.
Children shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision. -
Allow the appliance to cool before storing away.
-
After use, do not coil the lead around the appliance as this may cause damage. Instead, coil loosely by the side of the appliance.
-
Do not use any accessories other than those recommended by BaByliss.
-
Always unplug the appliance when not in use or before cleaning.
-
This product complies fully with all appropriate EU and UK Legislation and the Standards relevant to this type and class of appliance. We are an ISO9001:2015 certified company that continually evaluates our Quality Management System performance. If you have any queries regarding product safety and compliance, please contact the Conair Customer Care Line. (See ‘UK After Sales Service’ section for further information).
DEEP WAVER
Create texture and waves with the Deep Waver featuring extra-large titanium
ceramic plates and up to 210˚C high heat.
The advanced heating system delivers precision-regulated temperatures and
instant heat transfer for fast, long-lasting results.
FEATURES
- Extra-large plates with superior titanium-ceramic finish
- The advanced heating system delivers precision-regulated temperature control
- Ultra-fast heat up and instant heat recovery
- 5 digital temperature settings for enhanced heat protection on all hair types
- Stay cool safety tip
- Auto shut-off for added safety
- Salon length 2.7m swivel cord for ease of use
- Heat mat with storage compartment for convenience and safety
HEAT SETTINGS
There are 5 temperature settings to select from (170°C-210°C) for enhanced
heat protection on all hair types. If you have delicate, fine, bleached, or
colored hair, use the lower heat settings. For thicker hair, use the higher
heat settings.
It is suggested to always complete a test on initial use to ensure the correct
temperature is used on the hair type. Start on the lowest setting and increase
the temperature until the desired result is achieved.
Below is a guide to the temperature settings.
Hair Type Description| Very Fine, Fragile Hair| Regularly Coloured or
Highlighted Hair| Fine, Easy to Curl Hair| Normal Textured
Hair| Naturally Curly or
Wavy Hair| Thick or Coarse Hair
---|---|---|---|---|---|---
Recommended Temperature
Setting| 170°C| 170°C| 180°C| 190°C| 200°C| 210°C
HOW TO USE YOUR DEEP WAVER
CAUTION! Do not place the appliance on any heat-sensitive surface whilst in operation. Use the heat mat provided to protect the work surface whilst styling your hair.
-
Press the ‘I/0’ button to switch the styler on.
-
Use the temperature ‘+/-’ buttons to select the preferred temperature. The temperature increases in 10°C increments for specific temperature control (170°C-210°C).
NOTE: Always start with a lower temperature and increase gradually if required. -
The appliance will almost instantly heat up to the chosen heat setting.
WARNING! This appliance reaches up to 210°C, please take care to avoid the hot surface of the barrel coming into direct contact with the skin, in particular the ears, eyes, face, and neck.
STYLING ADVICE
- Divide dry hair into 4cm sections and comb through.
- Take a section of hair, starting around 3-4 inches from the scalp.
- Place the hair section between the top and bottom plates of the styler. The top plate of the styler should face away from your head (the flat base plate will protect your face).
- Clamp the handles together until they close and hold in place for 5-8 seconds.
- Release the handles, gently move the styler down the section, and re-position to overlap the last wave created, to ensure a continuous wave effect in the hair.
- Continue down the entire hair section, towards the ends of the hair.
- Repeat as necessary.
- After use, press the ‘I/0’ button to turn the styler off and unplug.
- Allow the styler to cool completely before storing away. For extra protection, wrap the styler in the salon heat wrap.
SALON HEAT WRAP
The waver comes with a salon heat wrap for use during and after styling.
During use do not place this appliance on any heat-sensitive surface, even
when using the heat wrap provided. After use, switch off and unplug the
appliance. Immediately wrap the appliance in the heat wrap provided and allow
the appliance to fully cool down before storing away. Continue to keep out of
the reach of children as it will remain hot for several minutes.
IMPORTANT: The black satin material is not heat resistant and the
appliance should not be placed on this material whilst hot.
AUTO SHUT-OFF
This appliance has an automatic shut-off feature for added safety. If the
appliance is switched on for more than 72 minutes continuously, then it will
automatically switch off. If you wish to continue using the appliance after
this time, simply press the ‘I/0’ button to turn the power on again.
LOOKING AFTER YOUR DEEP WAVER
To help keep your appliance in the best possible condition follow the steps below:
- Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
- Do not use the appliance at a stretch from the PowerPoint.
- Always unplug after use.
UK GUARANTEE
This BaByliss PRO appliance is guaranteed for professional use for 1 year and
is only valid within the United Kingdom.
Exclusions
This guarantee will no longer be valid meaning that The Conair Group Ltd will
not be liable to repair or replace your product where:
- The appliance has been used on a voltage supply other than that which is marked on the product or advised within this instruction booklet
- The appliance has been purchased from an unauthorized stockist*
- Repairs or alterations have been attempted by unauthorized persons
- The failure of the appliance is a direct result of misuse
- The failure is a result of not following the instructions for use
This guarantee does not cover any cosmetic damage due to misuse of the product
nor any damage to persons or property that occurs because of product misuse.
*unauthorized stockists include, but are not limited to online auction sites, private sellers, and those selling second-hand goods, refurbished products, etc.
Please contact the Conair Customer Care Line on 03705 133 191 (09:00 to 17:00
Monday to Friday) or e-mail ukinfo@conair.com for
further information on authorized stockists.
It is important to retain your proof of purchase. We recommend attaching your
receipt to this page.
Even where a refund may be applicable, no refund will be provided without a
valid receipt or proof of purchase, we will only be able to offer a repair or
replacement service. Please note this does not apply if the product was
purchased directly from The Conair Group Ltd.
Guarantees on replacement products run from the original purchase date or date
of delivery, whichever is later, and not from the date of replacement.
This guarantee is an additional benefit and does not affect your statutory
rights as a consumer. If you have any queries regarding this guarantee please
contact the Conair Customer Care Line on 03705 133 191 (09:00 to 17:00 Monday
to Friday) or e-mail ukinfo@conair.com.
UK AFTER-SALES SERVICE
For further advice on using the appliance or should you need to return your
product, please contact the Conair Customer Care Line on 03705 133 191 (09:00
to 17:00 Monday to Friday) or e-mail your inquiry to
ukinfo@conair.com.
Return address:
Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your return number, name, and address details, together with a
copy of proof of purchase and details of the fault.
Please note this Instruction Booklet is not a guarantee.
SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it should be handed to an appropriate collection point for the recycling of Electrical and Electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council office or your household waste disposal service.
UKCA DECLARATION OF CONFORMITY
In accordance with UK Government guidance
We, the undersigned, take full responsibility for the product’s compliance.
Type of product
Type number
Trademark
With following characteristics
Country of origin
Manufacturer name
Address| : Curling Iron
: F66b
: BaByliss PRO / Conair / CPL
: 230V~, 50-60Hz, 95W
: China
: Conair UK
: PR7 7DW
---|---
The object of the declaration described above is in conformity with the relevant UK Statutory Instruments (and their amendments):
2016 No. 1101 | Electrical Equipment (Safety) Regulations 2016 |
---|---|
2016 No. 1091 | Electromagnetic Compatibility Regulations 2016 |
2012 No. 3032 | Restriction of the use of certain Hazardous Substances in |
Electrical and Electronic Equipment Regulations 2012
2019 No. 539| Ecodesign for energy-related products and energy information
(Amendment) (EU Exit) Regulations 2019
References to the relevant designated standards used or references to the other technical specifications in relation to which conformity is declared:
LVD| BS EN 60335-1
BS EN 60335-2-23| 2012
2003| A2: 2019; A15: 2021
A2: 2015
---|---|---|---
(including EMF)| BS EN 62233| 2008|
Ecodesign| BS EN 50564| 2011|
EMC| BS EN 55014-1
BS EN 55014-2
BS EN IEC 61000-3-2
BS EN 61000-3-3| 2017
2015
2019
2013| A11: 2020
A1: 2019
The technical documentation is available from:
Name The Conair Group Ltd,
Address: Unit 4, Revolution Park, Buckshaw Avenue, Buckshaw Village, Chorley,
PR7 7DW
Signed by and on behalf of:
BABYLISS FACO S.R.L. (authorised by BABYLISS S.A.R.L. and The Conair Group
Ltd)
Avenue de l’Indépendance 25, B-4020 Wandre, Belgium
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of
the manufacturer
Type of product | Curling Iron |
---|---|
Type number | F66b |
Trademark | BaByliss PRO |
With following characteristics | 230V~, 50-60Hz, 95W |
Country of origin | China |
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
2014/35/EU | Low Voltage Directive |
---|---|
2014/30/EU | Electromagnetic Compatibility Directive |
2011/65/EU | RoHS Directive and its amendments including (EU) 2015/863 |
2009/125/EC | Ecodesign Directives implemented by the Commission Regulations |
(EC) No.
1275/2008 amended by (EU) No. 801/2013 and (EC) No. 2019/1782 (where
applicable)
In accordance with the following standards
LVD| EN 60335-1
EN 60335-2-23| 2012
2003| A11: 2014; AC: 2014; A13: 2017; A1: 2019;
A2: 2019; A14: 2019; A15: 2021
A1: 2008; A11: 2010; A2: 2015
---|---|---|---
including EMF| EN 62233| 2008|
Ecodesign| EN 50564| 2011|
EMC| EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3| 2017
2015
2019
2013| A11: 2020
A1: 2019
CE mark first affixed
Signed by and on behalf of
BABYLISS S.A.R.L. and / et The Conair Group Ltd)
IB-13/192B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>