BaByliss ST241E Smooth Ceramic Hair Straightener User Manual
- June 1, 2024
- BaByliss
Table of Contents
BaByliss ST241E Smooth Ceramic Hair Straightener
Product Information
Specifications:
- Brand: BaByliss SARL
- Model: ST241E
- Country of Origin: France
- Website: www.babyliss.com
Product Usage Instructions
Safety Instructions:
Read the safety instructions provided in the manual before using the
appliance.
How to Use:
WARNING! Take care to avoid direct contact of the hot surface with the
skin, especially around sensitive areas like ears, eyes, face, and neck. Do
not touch the hot plates when the appliance is switched on.
Heat Settings:
- For delicate, fine, bleached, or colored hair, use the lower heat setting.
- For thicker hair, use the higher heat setting.
- Always perform a test on a small section of hair before full use to determine the appropriate temperature setting. Start with the lowest setting and increase gradually as needed.
Auto Shut Off:
The appliance features an automatic shut off function for safety. If left
on continuously for more than 60 minutes, it will turn off automatically. To
resume use after this time, switch the
appliance to ‘0’ and then back to the desired setting.
Heat Mat:
- Use the provided heat mat during and after styling.
- Avoid placing the appliance on heat-sensitive surfaces, even when using the heat mat.
- After use, switch off and unplug the appliance. Wrap it immediately in the heat mat to cool down. Keep it out of children’s reach as it remains hot for a few minutes.
FAQ (Frequently Asked Questions)
-
Q: Can I use this appliance on wet hair?
A: It is recommended to use this appliance on dry hair to avoid damage. -
Q: How do I clean the appliance?
A: Allow the appliance to cool down completely before cleaning. Use a damp cloth to wipe the plates and exterior surfaces. Do not immerse in water. -
Q: What should I do if the appliance malfunctions?
A: If you experience any issues, unplug the appliance immediately and contact customer support for assistance.
ST241E – C182e
ST241E
Read the safety instructions first.
HOW TO USE
WARNING! Take care to avoid the hot surface of the appliance coming into direct contact with the skin, in particular the ears, eyes, face and neck. WARNING! Do not touch the hot plates when the appliance is switched on.
- Ensure hair is dry and combed through to remove any tangles. Divide the hair into sections ready for styling.
- Slide the switch to the heat setting suitable for your hair type to turn the appliance on. The indicator light will flash until the desired heat setting has been reached. Once the temperature has been reached, the indicator light will remain solid in colour.
- Place a section of hair between the straightening plates, close to the roots.
- Hold the hair firmly between the straightening plates and slide down the length of the hair, from root to tip.
- Repeat for each section of hair.
- Allow the hair to cool before combing through.
- After use, slide the switch to the ‘0’ setting to switch off and unplug the appliance.
- Allow the appliance to cool before storing away.
Heat Settings
- If you have delicate, fine, bleached or coloured hair, use the lower heat setting. For thicker hair, use the higher heat setting. It is suggested to always complete a test on initial use to ensure the correct temperature is used on the hair type. Start on the lowest setting and increase the temperature until desired result is achieved.
- Below is a guide of the temperature settings:
- 0 = OFF
- I = 200°C
- II = 230°C
Auto Shut Off
This appliance has an automatic shut off feature for added safety. If the
appliance is switched on for more than 60 minutes continuously, it will
automatically switch off. If you wish to continue using the appliance after
this time, simply slide the switch to the ‘0’ setting, then slide the switch
to the relevant setting to turn the power on again.
Heat Mat
The appliance comes with a heat mat for use during and after styling. During
use, do not place the appliance on any heat sensitive surface, even when using
the heat mat provided. After use, switch off and unplug the appliance.
Immediately wrap the appliance in the heat mat provided and allow to fully
cool down. Continue to keep it out of reach of children as it will remain hot
for several minutes.
CLEANING & MAINTENANCE
To keep your appliance in the best possible condition, please follow the steps below:
- Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
- Do not use the appliance at a stretch from the power point.
- Always unplug after use.
Made in China
- BABYLISS SARL
- ZI du Val de Calvigny 59141 Iwuy
- France
- www.babyliss.com
- FAC 2023/10
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>