BaByliss Thermo Ceramic Heated Hair Rollers Instructions

BaByliss Thermo Ceramic Heated Hair Rollers

Product Information

Specifications

• Heat Settings: Adjustable with lower and higher settings
• Hair Types: Suitable for delicate, fine, bleached, colored, and thicker hair

Product Usage Instructions

Heat Settings
If you have delicate, fine, bleached, or colored hair, it is recommended to use the lower heat settings. For thicker hair, opt for the higher heat settings. Always conduct a test on a small section of hair before full use to determine the appropriate temperature setting for your hair type. Start with the lowest heat setting and gradually increase the temperature until you achieve the desired result. Avoid using high heat directly on delicate or fine hair to prevent damage.

Important Notes

• Always ensure the device is unplugged when not in use.
• Follow the manufacturer’s guidelines for safe and effective use.
• Regularly clean and maintain the device as per the instructions provided.
• Keep the product away from water and moisture to prevent electrical hazards.

FAQ

• Q: How do I clean the device?
  A: To clean the device, first ensure it is unplugged. Use a soft, damp cloth to wipe the exterior of the device. Avoid using harsh chemicals or abrasive materials that may damage the product.

• Q: Can I use the product on wet hair?
  A: It is recommended to dry your hair completely before using the product to avoid any potential damage from heat styling on wet hair.

INSTRUCTIONS FOR USE

• Place the appliance on a level, heatproof surface. Do not open the lid at this time.
• Turn the appliance on by sliding the switch to the ‘I’ position.
• One roller has a ‘heat ready dot’ on top. The dot will turn from red to white, indicating optimum temperature has been reached and the rollers are ready to use. Open the lid and begin to style the hair. • Comb through the hair to remove any tangles. Divide in to sections and select a roller. The rollers can be used on damp or dry hair.
• Begin placing the rollers at the top of the head and work down towards the nape of the neck.
• Take a section of hair the width of a roller, starting at the hair ends wind the hair around the roller, holding the hair taut. Keep the roller at right angles to the scalp, to ensure even curls.
• Secure the roller with one of the clips or metal pins provided. If using the metal pins, insert the pin over the roller, through the hair and away from you.
• Repeat throughout each section until you have used all the rollers.
• To turn off the appliance by sliding the switch back to the ‘0’ position and unplug the appliance.
• Once the rollers have cooled, remove the rollers from the hair. Gently hold the roller in one hand and remove the clip or metal pin with the other. Slowly unroll the roller, being careful not to pull the hair as you unwind. Once the hair is loose from the roller, let it bounce back up.
• Let the hair fully cool so the curl can ‘set’, then style the hair as desired.
• Once the appliance has cooled down, replace all the clips and rollers back in the unit and close the lid. • Allow the appliance to cool before storing away.

HEAT SETTINGS

If you have delicate, fine, bleached or coloured hair, use the lower heat settings. For thicker hair, use the higher heat settings. It is suggested to always complete a test on initial use to ensure the correct temperature is used on the hair type. Start on the lowest setting and increase the temperature until desired result is achieved.

• Select the desired heat setting by turning the heat dial accordingly.
• If you have delicate, fine or coloured hair, use the lower heat settings. For thicker hair, use the higher heat settings. • The rollers will be ready to use in just 5 minutes. IMPORTANT! Be careful to avoid contact with the heated bars when removing and replacing the heated rollers.

IMPORTANT!

• The rollers have been specifically designed to reach high temperatures in order to produce fast and perfect curl formation.
• When applying the rollers to short or fine hair, allow the rollers to heat up until the heat ready dot turns white. Once the heat ready dot has turned white, turn off the unit and open the roller and clip lids. Allow the rollers to cool until they feel comfortable when applying into the hair. Failure to do so may lead to discomfort.
• Always take extra care to avoid the rollers coming into direct contact with the scalp.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>