LEDLyskilder R6-1 Ultrathin Touch Wheel RF Remote Controller Instruction Manual

June 4, 2024
LEDLyskilder

Ultrathin Touch Wheel RF Remote Controller
Model No.: R6/R6-1

1 and 4 zones dimming/Touch brightness wheel/Wireless remote 30m distance/CR2032 battery

Features

  • Apply to single color LED controller.
  • Ultra-sensitive color adjustment touch wheel.
  • Each remote can match one or more receivers.
  • RC 2032 battery powered.
  •  Operate with LED indicator light.

LEDLyskilder R6 1 Ultrathin Touch Wheel RF Remote
Controller

Technical Parameters

Input and Output

Output signal R l RF 2.4GHz
Working voltage 3 3VDC CR2032
Working current 5mA
Standby current 10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)

Environment

Operation temperature Ta: -30OC ~ +55OC
IP rating IP20

Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED

Warranty

  Warranty  5 years

Weight

Gross weight  0.037kg
  Net weight  0.062kg

Mechanical Structures and Installations

LEDLyskilder R6 1 Ultrathin Touch Wheel RF Remote Controller - Mechanical
Structures

R6, R6-1 Ultrathin Touch Wheel RF Remote ControllerLEDLyskilder R6 1
Ultrathin Touch Wheel RF Remote Controller - Back holder

To fix the remote, two options are offered for selection:
Option 1:  fix the remote’ back holder on the wall with two screws.
Option 2: adhere the remote’ back holder to the wall with paster.
Note: Before the first use, please remove the protective film on the battery.

Note: If the LED indicator is not on when pressing the key, it is due to a dead battery or bad contact caused by multiple plugging, please replace the battery, or raise the battery shrapnel with a screwdriver.

Operation

  • When the light is on, touch the color wheel, the indicator will display red.
  • To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter the sleep state, you need to press any key to make the touch wheel quit sleep state.

Match Remote Control (two match ways)
The end users can choose suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key
Match:
Short press the match key, and immediately press the on/off key (single zone remote) or zone key (multiple zones remote) on the remote.
The LED indicator fast flash a few times means the match is successful.
Delete:
Press and hold the match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart
Match:
Switch off the power, then switch on the power, and repeat again.
Immediately short press the on/off key (single zone remote) or zone key (multiple zones remote) 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Switch off the power, then switch on the power, and repeat again.
Immediately short press the on/off key (single zone remote) or zone key (multiple zones remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.

Key function

  • R6 4 zone dimming remote

LEDLyskilder R6 1 Ultrathin Touch Wheel RF Remote Controller - Key
function

On/Off: Short press turn on/off all zone lights.
1,2,3,4 zone: Short press select and turn on zone light, long press 2s turn off zone light.
Short press the multiple zone key fastly, will synchronous select multiple zones synchronously.
Bright wheel: Touch to change current zone brightness.
Bright+/-: Adjust the brightness for the currently selected zone, short press 10 levels, and long press 1-6s for continuous 256 levels adjustment.
3 Scene: Short press recall the scene, long press 2s save the current state into the scene. the LED indicator will light up longer when save OK.
4 zone recall or save synchronously.
The remote can be used as 4 zones dimming remote or a single-zone 4-channel dimming remote.
On/Off + 4: Long press 2s set as 4 channel dimming remote, only match with one or multiple receivers of 4 channel, such as V4 or C4 controller.
On/Off + 1: Long press 2s set as 4 zones dimming remote, each zone match with one or multiple receivers.
When set ok, the red indicator will light on longer.

R6-1 1 zone dimming remote

On/Off: Turn on/off the light.
Bright wheel: Touch to change brightness.
Bright+/-: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
100%,75%,50%,25%: Get 4 kinds brightness directly.
3 Scene: Brightness memory.
Short press recalls the scene, and long press 2s save the current brightness into the scene. the LED indicator will light up longer when save OK.

Safety information

  1. Read all instructions carefully before you begin this installation

  2. When installing the battery, pay attention to the battery’s positive and negative polarity.
    After a long time without the remote control, remove the battery.
    When remote distance becomes smaller and insensitive, replace the battery.

  3.  If no response from the receiver, please re-match the remote.

  4. Gently handle the remote, beware of falling.

  5.  For indoor and dry location use only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals