GERMAN CMV-350 Auto Chill Cold Brew Coffee Maker User Manual

GERMAN CMV-350 Auto Chill Cold Brew Coffee Maker

Warning & Safety Precautions

WARNING!
Read all instructions carefully before using this product.

• This product is for domestic indoor use only. If this product is used for any commercial, industrial, rental or other purposes, product warranty will be VOIDED.

• This product is not intended for use by children or persons with reduced physical, sensory
  or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of this product by an adult responsible for their safety.

• Mind your children and DO NOT let children play with this product.

• Cleaning and user maintenance shall not be made by children without supervision.

• Check the voltage indicated on the rating label before using this product.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or simi-larly qualified persons in order to avoid hazards.

• Unplug this product from the power source before cleaning and maintenance.

• Contact German Pool authorized service technician for repair or maintenance of this product.

1. Please read the Instruction Manual carefully before using the product, and keep the Instruction Manual properly for future reference.
2. Please strictly follow the instructions below. Ignorance to any instruction or any operation error may lead to a major accident or other injuries.
3. Please check the specification of the power adapter carefully before use.
4. The product applies to DC 12V. Be sure to use the power adapter provided by our company to guarantee your personal safety.
5. Please put the product on a stable, level surface out of the reach of children.
6. When used, the product should be placed in a well ventilated place without any blocking to the air outlet and inlet.
7. When the product is working, DO NOT move or tilt the liquid inside.
8. DO NOT immerse the maker in water for cleaning or get any liquid into the inner machine to avoid any danger due to short circuit.
9. Dismantling any part for repair without authorization is prohibited, so that any fire, electric leakage or other failure can be avoided.
10. DO NOT let the product work for a long time without being attended to.
11. Rinse the maker in time after using it. Leaving liquid in the maker for more than 2 hours is prohibited, because the high protein in the drink, such as milk, yogurt and other dairy may go bad and produce odor if left inside for a long time.
12. Before turning on the product, please make sure the product is dry and all parts are mounted correctly.
13. If the power cord is damaged, it must be replaced by German Pool Customer Service & Repair Centre’s qualified technicians in order to avoid a hazard.
14. The product is for home use only. DO NOT use it for commercial purpose.

Product Structure

Body

Control Panel

Operation Instructions

Before Use

1. Before using for the first time, please clean the product body and accessories according to the instructions mentioned in “Cleaning and Maintenance” section.
2. Place the product base on a sturdy and level surface, then place the main body on the base.
3. Turn the dispensing tap clockwise to “ — ” (close) position.
4. Plug the dispensing cylinder onto the product body by aligning the dot with the “Unlock” icon, then turn the cylinder anti-clockwise to lock it in securely (until the dot aligns with the “Lock” icon).
5. Add ground coffee or tea leaves into the filter cup, cover the filter lid, then plug the filter cup onto the bottom of the top lid.
6. Add water into the water tank, then close the top lid.

WARNING!

• Use only purified or mineral water with this product.
• DO NOT fill to above the maximum water mark.
• Before adding water into the water tank, make sure the dispensing knob is turned to “—” (close) position.
• After filling the water tank, DO NOT unlock or remove the dispensing cylinder, otherwise water will spill out from the machine.

Brewing Coffee Or Tea

1. Connect product to the power source, the buzzer will beep once, all indicator lights will light up for 1 second then go dark. LED display will show “OFF”, and product enters standby status.

2. Press On/Off key to cycle among “Cold Brew” – “Warm Brew” – standby status.

3. When selecting “Cold Brew” or “Warm Brew”, the corresponding indicator light will flash, LED display will show the current water temperature. If the product does not receive any further command in 5 seconds, it will automatically start brewing.
   Note:

4. • When selecting “Cold Brew” mode, long-press On/Off key for 3 seconds to enter “Temperature Setting”. When LED display is flashing, press ON/OFF key to select desired temperature of 5°C – 10°C – 15°C. If no further instruction is received in 5 seconds, product will automatically start brewing.

5. This product has built-in memory function. After product is turned off, the next time it is turned on again, if user does not set a new temperature, it will brew at the previously set temperature.

6. There is no temperature selection for ”Warm Brew” mode, the product will automatically brew at 55°C.

7. When product is in the brewing status, press ON/OFF key will stop the brewing process and return the product to standby status.

8. When the product is in brewing status but does not receive any command, it will automatically turn off and return to standby status after 4 hours.

Note:
Time needed to reach selected temperature may differ according to input water temperature, ambient temperature and input water volume.

WARNING!
After each use, promptly unplug product from the power source, rinse out the water tank and dispensing cylinder to avoid residual coffee or tea going stale and causing odor.

Tips On Brewing Coffee Or Tea

• For tea : It is recommended to use unfermented or lightly fermented tea leaves, and the recommended tea to water ratio is 1:100 to 2:100.
• For cold brew coffee : It is recommended to use medium-ground coffee powder, and the recommended coffee to water ratio is 1:15 according to individual preference.
• If user prefers a slightly acidic taste, light-roasted coffee is recommended; if user prefers a slightly bitter taste, dark-roasted coffee is recommended.

Cleaning and Maintenance

WARNING!

• Before cleaning the product, turn off the product and unplug from the power source, and wait until the product has completely cooled down before cleaning.
• DO NOT immerse the product or top lid in water or rinse it under running water.
• After using the product, promptly unplug from the power source.
• The water tank and top lid may be cleaned with a soft sponge. To avoid damaging the tank coating, DO NOT clean with steel scourer or other hard objects.
• The outer casing of the product may be wiped clean with moist cloth. DO NOT rinse the main body or top lid with water to avoid causing electric leakage.
• Use soft brush to clean detachable accessories like the dispensing cylinder and filter cup, then wipe dry or let to air dry.
• When cleaning the dispensing cylinder, first detach it from the main body, then run a soft brush through the tube to clean it.
• If the product will not be used for a prolonged period of time, clean it thoroughly and wipe it dry. Detachable accessories should be allowed to air dry completely before storing away in a dry and well-ventilated place, to avoid dampness affecting future use.
• DO NOT immerse the top lid and dispensing cylinder in water to avoid water entering the inner structure.

Troubleshooting

Please contact German Pool Customer Service and Repair Centre.
LED panel shows “E1”| Product short circuit. Please contact German Pool Customer Service and Repair Centre.
LED panel shows “E2”| Product open circuit. Please contact German Pool Customer Service and Repair Centre.

WARNING!
If problem persists, please contact German Pool Customer Service and Repair Centre. DO NOT disassemble product unless by a qualified technician.

Technical Specification

• Specification is subject to change without prior notice.
• If there is any inconsistency or ambiguity between the Chinese version and the English version of this user manual, the Chinese version shall prevail.
• Refer to www.germanpool.com for the most updated version.

QR CODE

Warranty Terms & Conditions

Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase). This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

1. Visit our website and register online: www.germanpool.com/warranty
2. Complete all the fields on the attached Warranty Card and mail it back to our Customer Service Centre.

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.

1. Customer who fails to present original purchase invoice will not be eligible for free warranty service.

2. Customer should always follow the operating
   instructions. This warranty does not apply to:

3. labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs;

4. damages caused by accidents of any kind (including material transfer and others);

5. operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs.

6. This warranty is invalid if:

7. the purchase invoice is modified by an unauthorized party;

8. the product is used for any commercial or industrial purposes;

9. the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;

10. the serial number is modified, damaged or removed from the product.

11. German Pool will, at its discretion, repair or replace any defective part.

12. This warranty will be void if there is any transfer of ownership from the original purchaser.

Customer Service & Repair Centre

Hong Kong Unit B, G/F, Sunshine Kowloon Bay Cargo Centre, 59 Tai Yip Street, Kowloon Kowloon, Hong Kong

• Tel : +852 2333 6249
• Fax : +852 2356 9798
• Email : repairs@germanpool.com

This warranty is valid only in Hong Kong and Macau © All rights reserved. Copying, reproducing or using the contents of this manual is not allowed without prior authorization from German Pool, violators will be prosecuted. www.germanpool.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>