camry CR 4702 Food Slicer User Manual
- June 9, 2024
- camry
Table of Contents
camry CR 4702 Food Slicer
SAFETY CONDITIONS
IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The appliacable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are c arried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- Never put the power cable, the plug or the whole device into the water . Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to b e replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter.
- Do not immerse the motor unit in water.
- Slicer is not intended for use in catering establishments.
- Never block the OFF switch. This creates a risk of injury or damage to the device.
- Slicer must be used with food carriage (Fig. 1, 6) and food pusher (Fig. 1, 4), unless the size and shape of the sliced product makes it impossible.
- Always unplug the power cord from the outlet before cleaning the slicer.
- Do not push small product with your hand. Use only the food pusher (Fig. 1, 4) to push products.
- Before you start, check if the blade is correctly installed.
- Do not overload the device by using excessive amount of the sliced product or extreme pushing.
- When turning the slicer on, make sure that your left hand is correctly positioned on the body and the ON button is correctly pressed.
- Use the slicer only for slicing food.
- Do not use the slicer to slice the following: dry bread, frozen foods, meat with bones, fruit with hard seeds or products wrapped in aluminum foil or plastic.
- Clean the slicer after each use.
- Do not remove the debris left on the blade when the device is plugged into the power outlet.
DEVICE DESCRIPTION
- The ON switch and the lock button
- Blade removal knob
- Blade
- Food pusher
- Pusher guide
- Food carriage
- Collapsible tray
- Slice thickness adjustment knob
BEFORE FIRST USE
Assemble the food carriage (Fig. 1, 6) with the pusher guide (Fig. 1, 5) as shown in Fig. 3. Set the slicer in the place where you can easily operate it, near a power outlet, making sure that that you are able to press the lock button (Fig. 1, 1) with the fingers of your left hand and hold the product to be sliced or the food pusher (Fig. 1, 4) with your right hand. The counter should be dry. The slicer must not move during use. Place the food carriage (Fig. 1, 6) with the assembled pusher guide (Fig. 1, 5) on the collapsible tray (Fig. 1, 7), aligned with the notches.
USING THE SLICER
Place the product to be sliced on the food carriage (Fig. 1, 6). Place the food pusher (Fig. 1, 4) onto the pusher guide (Fig. 1, 5). Set the slicing thickness by turning the knob (Fig. 1, 8) with your left hand. To turn on the slicer, simultaneously press the ON switch and the lock button (Fig. 1, 1). With your right hand, push and move the product together with the carriage (Fig. 1, 6) away from you towards the blade until the end of the carriage; then go back and repeat.
CLEANING AND MAINTENANCE
When done, unplug the slicer from the power outlet. Using the knob, set the slicing thickness to 0 mm. This setting prevents accidental access to the blade. After each use, clean the slicer and wipe it dry. The body of the slicer houses the blade driver – never immerse the body in water or wash it under running water. The slicer body can be cleaned with wet cloth with dishwashing detergent.To remove the carriage (Fig. 1, 6) off the tray (Fig. 1, 7), slide the carriage towards you and take it off.To remove the blade (Fig. 1, 3), turn the blade removal knob (Fig. 1, 2) approximately ¼ turn to the right, and remove the blade (Fig. 1, 3). Use extreme caution when removing, cleaning and inserting the blade. The blade is very sharp. Re-attach the clean blade (Fig. 1, 3) to the body by inserting it into the blade recess and secure it by turning the blade removal knob (Fig. 1, 2) approximately ¼ turn to the left until you feel resistance.
TECHNICAL DATA
- Nominal power: 150W
- Maximum power: 400W
- Maximum allowable Worktime: 5 min
- Power supply: 220-240V ~ 50/60Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
AVAILABLE PRODUCT
