PNI ES100 Mifare Card Switch User Manual
- June 9, 2024
- PNI
Table of Contents
PNI ES100
RFID Card Switch
User manual
FOREWORD
PNI ES100 card switch is suitable for hotels and guest houses.
By inserting the electromagnetic card into the switch, it will supply the
connected electrical device.
TECHNICAL SPECIFICATIONS
» Power supply voltage: 230V
» Maximum current: 30A
» Maximum load: 6000W
» Standby consumption: 0.01W
» Delay: approx. 15 seconds (15 seconds after removing the card, the switch
will switch off the power of the connected device)
» Dimensions: 84 x 84 x 43 mm
CONNECTION SCHEME
WARNINGS
Before installing the switch, turn of the general power supply.
We recommend that only the qualified electricians install the switch.
EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that RFID Card Switch model ES100 complies
with the Directive EMC 2014/30/EU and RED 2014/53/UE. The full text of the
EU declaration of conformity is available at the following Internet address:
https://www.mypni.eu/products/4785/download/certifications
Documents / Resources
| PNI
ES100 Mifare Card
Switch
[pdf] User Manual
ES100 Mifare Card Switch, ES100, Mifare Card Switch, Card Switch, Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>