PNI H1073A Electric Lock User Manual
- June 9, 2024
- PNI
Table of Contents
H1073A Electric Lock
Product Information:
The PNI H1073A is an electric lock that can be used for doors of varying thickness. It comes with an external housing made of durable material and a cylinder and latch made of high-quality metal. The lock operates on a voltage of only impulse and has a long lifespan. This lock is designed for both left- handed and right-handed doors and comes with screws holes for easy installation. It also includes a set of keys for manual operation in case of emergencies.
Product Usage Instructions:
Before installing the PNI H1073A electric lock, it is important to ensure that
the recommended copper wire with the appropriate section and length is used
for connections. The installation process must be performed by specialized
personnel only. To install the PNI H1073A, follow the instructions provided in
the user manual. The manual also includes an installation scheme that shows
the various components required for installation, such as the access control
keypad, switching power supply, and access button. After installation, connect
the electric lock to the access control system using the recommended copper
wire. Test the lock to ensure it operates smoothly and without any issues. The
lock can be operated using keys or an access control system depending on the
setup. Remember to keep the lock clean and dry to ensure its longevity. Refer
to the user manual for troubleshooting or maintenance guidance.
FUNCTIONS
- It supports electrical control or hand operation.
- It is compatible with door phones or access control systems.
INSTALLATION
- Use the included screws to install the lock body, the cylinder and the door holder. At least 5 mm installation distance from lock body to door holder is recommended.
- The cylinder should be mounted on the external side of the door using the included accessories. The axis of the cylinder must pass through the door up to the dedicated slot in the lock body (on the other side of the door). To open the lock, it is enough turn the key in the cylinder.
- The spring can be adjusted according to the weight of the door.
- Use a 7 – 12 d.c. voltage and a power higher than 12 W to open the lock.
- By pushing the button, the electric lock unlocks after 1 second.
NOTES:
- The maximum continuous power supply time for unlocking the lock must not exceed 3 seconds. The lock is not dependent on polarity.
- For safety, please use powdery lubricant for the cylinder.
EXAMPLE OF INSTALLATION SCHEME
- A – Electric lock (PNI H1073A)
- B – Access control keypad (eg. PNI DK220, PNI DK110)
- C- Switching power supply (eg. PNI ST3.4A)
- D – Access button (eg. PNI PB410)
NOTE: The lock installation must be performed by specialized personnel only.
RECOMMENDED COPPER WIRE
| Section mm 2 | Diameter Ø | Length m |
|---|---|---|
| 0,30 | 0,6 | 8 |
| 0,5 | 0,8 | 15 |
| 1 | 1,2 | 25 |
| 1,5 | 1,4 | 40 |
| 2,5 | 1,8 | 60 |
TECHNICAL DETAILS
| Electric lock outer housing material | Steel |
|---|---|
| Cylinder and latch material | Brass |
| Operating voltage (only impulse) | 0,5 – 3s @ 7 – 12 V d.c. / 2 – 3.5A |
| Lifespan | at least 200.000 actions |
| Recommended door thickness | 35 – 50 mm |
| Included keys | Yes, 3 pcs. |
| Dimensions | 125 x 101 x 39 mm |
| Operating temperature | -26°C ~ +80°C |
Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that Electric lock PNI H1073A complies with the Directive EMC 2014/30/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://www.mypni.eu/products/1878/download/certifications
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>