Chargers W107 Car Wireless Charging Bracket User Manual

Chargers W107 Car Wireless Charging Bracket

Product Information

The Car Wireless Charging Bracket is a device that enables wireless charging of compatible phone models in a car. The product comes with a main body fixing, indicator light, and brackets. The model number of the device is W107. The package includes a Car Magnetic Wireless Charger, a 45W Adapter, a USB-A to USB-C Charging Cable of 1.2m, and a user manual. The device has an input of 5V/3A and 9V/2A and an output of 15W/10W/7.5W/5W. The device is compatible with various iPhone models, including iPhone 14, iPhone 13, iPhone 12, and their respective variants.

Product Usage Instructions

1. Install the bracket by following the given steps:
   • Turn the shaft fixing piece to the left a little loosely.
   • Insert the bracket round ball part into the main body fixing.
   • Rotate the shaft fixing to the right until it is completely fixed.
   • Complete the installation of the bracket.
2. After installation, attach the device to the air outlet of the car by pressing the force point of the bracket clamp mouth.
3. Place your phone onto the mounting area of the device and connect it to the power supply.
4. The blue and green lights on the wireless charger will turn on for 3 seconds before turning off. The standby green light will remain on while charging. When the blue light breathes slow flashing, it indicates that charging is in progress. When fully charged, the light will turn off. If there is any abnormality during charging, the green light will flash.
5. Please note the following tips to avoid irregular charging or other issues:
   • The device is only compatible with Apple devices, not Samsung or devices from other manufacturers.
   • Place your phone in the correct charging area, ensuring a charging distance of 2-8mm, and avoid using protective covers thicker than 3mm or any metal or magnetic objects within 6cm of the back of the phone during charging.
   • The charging speed depends on the temperature, and it is recommended to avoid charging in hot and humid environments.
   • Always use the original charging cable and adapter provided with the device.

Please note that this device complies with FCC radiation exposure limits and should be installed and operated with a minimum distance of 20cm between the radiator and your body. In case of harmful interference to radio or television reception, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or consulting a dealer or an experienced radio/TV technician for help.

Packing list

Product Description

Specification yield

• Model ：W107
• Input ：5V/3A 9V/2A
• Output ：15W/10W/7.5W/5W

How to install the bracket

The correct installation method of the product:

1. Step① turn the shaft fixing piece to the left a little loosely.
2. Step② insert the bracket round ball part into the main body fixing.
3. Step③ rotate the shaft fixing to the right until it is completely fixed.
4. Step ④ Complete the installation of the bracket.

How to use the product

After the bracket is installed:

1. Step ① press the force point of the bracket clamp mouth, the clamp mouth open
2. ② Clamp the car mount on the air outlet, and then attach the phone to it and connect it to the power supply, so that the use of the product is complete done.
   ( Note : the wireless charger on the blue and green lights for 3 seconds off, standby green light is always on, charging When the blue light breathing slow flashing, full then light out, charging abnormal flashing green light）

Compatible Models

For iPhone

• iPhone 14,iPhone 14 PIus,iPhone 14 Pro,iPhone 14 Pro Max,iPhone 13,
• iPhone 13 Pro, iPhone 13 Pro Max,Phone 13 mini,iPhone 12,iPhone 12 mini,
• iPhone 12 Pro,iPhone 12 Pro Max

Warm Tips

Please pay attention to the following issues, otherwise it may cause irregular charging, high charging temperature, intermittent charging, or even no charging.

1. Not compatible with devices other than Apple, such as Samsung.
2. Please place your phone in the correct charging area.
3. The charging distance is 2-8 mm, please do not wear a protective cover thicker than 3 mm.
4. No metal or magnetic objects in the center 6 cm of the back of the phone during charging.
5. The lower the temperature, the faster the charging speed.
6. Charging speed is faster in winter than in summer.
7. Please do not charge in a hot and humid environment to avoid damaging the circuit.
8. Please put it out of reach of children to avoid unnecessary accidents.
9. Make sure to use the original charging cable and adapter.

About the FCC

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with part 15 of the FCC rules operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received including interference that may cause undesired operation.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device，pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However there is no quarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• lncrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>