Mercury Asus RT-N12 WiFi Routers User Guide
- June 9, 2024
- Mercury
Table of Contents
Mercury Asus RT-N12 WiFi Routers User Guide
Using your own router? No worries, we’ve got you covered!
Log into the gateway:
- Ensure your device is connected to the Router (preferably via cable)
- Open a web browser
- Type the following in the address bar at the top: 192.168.1.1
- Default Username: admin
- Default Password: admin
This should then give access to the router’s user interface
How to add correct settings for the Mercury network:
From the left menu select: WAN.
The Internet Connection page displays. Ensure the following settings are changed:
- WAN Connection Type: PPPoE
- Choose IPTV STB Port: None
- Enable UPnP: Yes
- Get the WAN IP automatically: Yes
- Connect to DNS Server automatically: Yes
- PPP Username: (your mercury acct number)@mercurybroadband.co.nz
- Password: password123
- Idle Disconnect Time in Seconds: 0
- MTU: 1492
- MRU: 1492
- Service Name: Leave blank
- Access Concentrator Name: Leave blank
- Additional pppd options: Leave blank
- Enable PPPoE Relay: Yes
- Select ISP: Manual
- Internet: VID – 10, PRIO – 0
- The rest can remain unchanged
- Click: Apply
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>