Mercury Fritz Box 7360 Fibre Modem Router User Guide

Mercury Fritz Box 7360 Fibre Modem Router User Guide

Using your own router? No worries, we’ve got you covered!
Ensure the Router is connected from LAN1 on Router to GE1 on ONT1

Log into the gateway:

1. Ensure your device is connected to the Router (preferably via cable)
2. Open a web browser
3. Type the following in the address bar at the top: fritz. box
4. If the first time you have logged in, then it will not require a username.
5. Select: Skip This Step and Continue

This should then give access to the router’s user interface

How to add correct settings for the Mercury network:

1. From the menu on the left select: Internet
2. From the sub-menu select Account Information
3. In the page locate the Internet Connection tab

Ensure the following settings are changed:

1. Internet Service Provider: Other
2. Name: Mercury
3. Connect Via: External Modem or Router
4. Operating Mode: Make Own Connection to the Internet
5. Is Account Information Required?: Yes
6. Username: (your mercury acct number) @mercurybroadband.co.nz
7. Password: password
8. Upstream: 320000kbit/s
9. Downstream: 320000kbit/s
10. Select: Change Connection Settings
11. Maintain Permanently: Ticked
12. Use VLAN for Internet Access: Ticked ­ 10
13. Check the Internet connection after “Apply”: Ticked
14. Click: Apply
15. Click: Submit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>