Mercury Asus RT-N56U Dual-Band Gigabit Wireless-N Router Instructions

Mercury Asus RT-N56U Dual-Band Gigabit Wireless-N Router

Product Information

Asus RT-N56U Fibre Setup

The Asus RT-N56U Fibre router is designed to provide users with high-speed internet connectivity via fibre optic technology. It is a powerful and reliable router that offers great wireless coverage and advanced features for an unparalleled experience. One of the standout features of this router is its user-friendly interface that allows for easy setup and configuration, making it an ideal option for both novice and advanced users.

Product Usage Instructions

Asus RT-N56U Fibre Setup

If you’re using your own router with the Asus RT-N56U Fibre setup, follow these steps to configure your settings:

1. Ensure your device is connected to the Router (preferably via cable).
2. Open a web browser.
3. Type “192.168.1.1” in the address bar at the top.
4. Enter the default username and password (admin) when prompted. This should give you access to the router’s user interface.
5. Select “Advanced Settings” from the left-hand menu.
6. Click on “WAN”.
7. The Internet Connection page should display.
8. Ensure that the following settings are changed:

• Connection Type: PPPoE
• Username: Your Mercury username
• Password: Your Mercury password
• VLAN ID: 10
• MTU: 1492

Once you’ve entered these settings, click “Apply” to save them. Your router should now be connected to the Mercury network and you should be able to enjoy fast and reliable internet connectivity. If you encounter any issues or require further assistance, refer to the user manual or contact customer support.

Log into the gateway

1. Ensure your device is connected to the Router (preferably via cable)
2. Open a web browser
3. Type the following in the address bar at the top: 192.168.1.1 4. Default Username: admin 5. Default Password: admin

This should then give access to the router’s user interface

ForCheck Here Further Login and Reset Instructions

How to add correct settings for the Mercury network

From the left menu select: Advanced Settings Click:

WAN The Internet Connection page displays. Ensure the following settings are changed

1. WAN Connection Type : PPPoE
2. Enable UPnP : Yes
3. Enable PPPoE Relay : No
4. Get the WAN IP automatically : Yes
5. Connect to DNS Server automatically: Yes
6. PPP Username : (your mercury acct number)@mercurybroadband.co.nz
7. Password: password
8. MTU: 1492
9. MRU: 1492
10. Service Name : Leave blank
11. Access Concentrator Name : Leave blank
12. Additional pppd options: Leave blank
13. Select ISP : Manual
14. Internet : VID – 10, PRIO – 0
15. The rest can remain unchanged
16. Click: Apply.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>