Holybro 12012 M8N GPS User Guide
- June 9, 2024
- Holybro
Table of Contents
12012 M8N GPS
Product Information:
- Product Name: Holybro M8N GPS
- SKU12012: Pin Map Holybro M8N GPS (JST GHR1.25mm 10 pin cable)
- SKU12013: Holybro M8N GPS for Pix32 (Molex1.25mm 6pin & 4pin &3pin cable)
- SKU12014: Holybro M8N 2nd GPS(JST GHR1.25m m 6pin cable)
- Packaging includes: M8N GPS Module 1, X’ type folding pedestal mount 1, Carbon rod 70mm & 140mm *1
Product Usage Instructions:
The Holybro M8N GPS comes in three different SKUs, and each SKU is designed to work with different input ports. To use the product, please follow these steps:
For SKU12012:
- Connect the JST GH 10Pin connector to the Pixhawk Series 10pinGPS Module or GPS1 input port.
- Once connected, you can start using the GPS module.
For SKU12013:
- Connect the Molex1.25mm 6pin & 4pin &3pin connectors to the Pix32 Switch, GPS, and I2C input ports.
- Once connected, you can start using the GPS module.
For SKU12014:
- Connect the JST GH 6Pin connector to the Pixhawk Series 6pinUART & I2Cor GPS2 input port as a secondary GPS.
- Once connected, you can start using the GPS module as a secondary GPS.
Note: The dimensions of the product are provided in the manual. Make sure to go through them before purchasing or installing the GPS module.
Descriptions
The M8N GPS has an UBLOX M8N module, IST8310 compass, tri-colored LED
indicator, and a safety switch. There are 3 different connectors options for
different purposes.
This module ships with a baud rate of 38400 5Hz
Features and Specifications
- Ublox Neo-M8N module
- Industry leading –167 dBm navigation sensitivity
- Cold starts: 26s
- LNA MAX2659ELT+
- 25 x 25 x 4 mm ceramic patch antenna
- Rechargeable Farah capacitance
- Low noise 3.3V regulator
- Current consumption: less than 150mA @ 5V
- Fix indicator LEDs
- Protective case
- 26cm cable included
- Diameter 50mm total size, 32 grams with case.
Pin Map
SKU12012
Holybro M8N GPS (JST GHR1.25mm 10 pin cable) :
This JST GH 10Pin connector can be use d on Pixhawk Series 10pin“GPS
Module” or “GPS1” input port.
| 
---|---
SKU12013
Holybro M8N GPS for Pix32 (Molex1.25mm 6pin & 4pin &3pin cable) :
These Molex1.25mm 6pin & 4pin &3pin connectors are for Pix32 “Switch”,
“GPS”, and “I2C” input ports.
| 
SKU12014
Holybro M8N 2nd GPS (JST GHR1.25m m 6pin cable) ：
This JST GH 6Pin connector can be used on Pixhawk Series 6pin“UART & I2C”or
” GPS2″ input port as secondary GPS.
| 
Dimensions
DIMENSIONS IN
MILLIMETERS
Package Included:
- M8N GPS Module *1
- ‘X’ type folding pedestal mount *1
- Carbon rod 70mm & 140mm *1
Holybro is a registered trademark of Holybro, registered in the U.S. and other countries. © Copyright 2018 Holybro. All Rights Reserved.
Website: www.holybro.com