OPTONICA 2586 LED Installation Panel Installation Guide
- June 9, 2024
- OPTONICA
Table of Contents
2586 LED Installation Panel
Product Information
The product is imported by Prima Group 2004 LTD and is located in Bulgaria, Sofia under the address Mladost 1, bl. 144, Ground Floor. For any inquiries or concerns, you may contact the importer through phone number +359 2 988 45 72.
Product Usage Instructions
- Unbox the product and ensure that all parts are complete and undamaged.
- Choose a suitable location for installation. The product should be placed on a level and stable surface.
- Install the product according to the manufacturer’s instructions. Make sure all connections are secured and the product is properly grounded.
- Refer to the user manual for information on how to properly operate and maintain the product.
- When not in use, turn off the product and unplug it from the power source.
- If you encounter any issues or problems with the product, refer to the troubleshooting section of the user manual or contact the importer for assistance.
Following these instructions will ensure that you can properly install, use, and maintain the product for maximum performance and longevity.
Installation
Case A (Without Mounting Hole)
How to install
How to uninstall
Don’t take out the lamp from any one side of the self-ock area
Don’t take out the lamp from any one side of the self-ock area 
Case B (With Mounting Hole Ready)
How to install
How to Un install
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144,
Ground Floor;
Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Loading......