VIDEX VL-F2A-505 2 LED Rechargeable Floodlight PREMIUM User Manual

VIDEX VL-F2A-505 2 LED Rechargeable Floodlight PREMIUM

TECHNICAL

VL-F2A-505

1. Lamp| 1.1.Luminous flux| 1600Lm (Лм)
1.2. Color temperature| 5000К
1.3. LED type| SMD2835
1.4. Color Rendering Index| Ra>80
1.5. Beam angle| 90°
1.6. Dimensions| 244.5x324x59.4 mm (мм)
1.7. Color| Black+Yellow (чорний+жовтий)
1.8. Material| Aluminum alloy (Алюмінієвий сплав)
2.Battery| 2.1. Power| 37Wh (Вг)
2.2. Type| Li-ion
2.3. Nominal voltage| 3.7V (В)
2.4. Nominal capacity| 10Ah (Аг)
3. Charging interface| Infrared, CR2032 powered
4. Maximum brightness runtime| 1.5m
5. Minimum brightness runtime| 5-8 h (sunny weather)

• Overall dimensions (mm), product weight (g/kg), operating temperatures range (°C), production date and batch number are indicated on individual packaging;
• Light power curve type: D (cosine).

SYMBOL

INTERPRETATION OF THE ICONS

7. 3-step internal dimmer;
8. Color rendering index;
9. Correlated color temperature;
10. Ultra-violet free;
11. Mercury free;
12. Beam angle;
13. Nominal lifetime;
14. On/off cycles;
15. No perceptible fl icker to the human eye;
16. Mechanical impacts protection;
17. Orange color signal light;
18. Ingress protection. The product protected against dust and water jets;
19. Minimum distance from the illuminated object;
20. Damaged light diff user should be replaced; 21. Product can be installed and used on/in normally fl ammable surfaces;
22. Suitable for indoor and outdoor use;
23. Product contains non-replaceable light source;
24. Electric shock protection class III – protection against electric shock is provided by feeding the specifi c product with very low safe voltage (SELV) with no risk of creating higher than safe voltage;
25. Product meets requirements of EU directives;
26. Product complies with the technical regulations of Ukraine.

ENVIRONMENTAL PROTECTION

27. Pursuant to the provisions of the WEEE Act, it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.

PRODUCT’S PURPOSE AND APPLICATION

This product is intended for autonomous lighting. The product has a built-in rechargeable battery and can work without connecting to the mains for a certain period of time.

INCLUDED

• LED rechargeable flood light with stand.
• Charging cable.
• User’s manual.
• Individual packaging.

INSTALLATION INSTRUCTIONS

A. Adjust the bracket tilt angle within 90 degrees (Fig. A):

1. Unscrew the clamps counterclockwise;
2. Adjust the desired tilt angle;
3. Tighten back the clamps.

B. Adjust the floodlight tilt angle within 360 degrees (Fig. B):

1. Unscrew the clamps counterclockwise;
2. Adjust the desired angle;
3. Tighten back the clamps.

LIGHTING MODES

Low – 20% Brightness;
Middle – 60% brightness;
High – 100% brightness;
Signal – flashing orange light.

OPERATING INSTRUCTIONS

Please read below instructions before fi rst use. The fl oodlight is controlled by the button, located on the underside of the fl ood light.
ON – with the light switched off , press the button.
Modes selection – with the light switched on, press the button to cycle over the modes.
OFF – with the light switched on, press and hold the button for 3 seconds. Remark: The floodlight automatically memorizes the last selected lighting mode and applies it next time when turned on.

CHARGING

Plug the USB-A socket of the charging cable into electrical outlet. Switch off the light, open the protective cover and connect the charging cable to the floodlight port.
When charging, the red indicator fl ashes. When fully charged, the red indicator is constantly on. After a full charge, unplug the charging cable and close the protective cover to prevent water and dust from entering the fl oodlight body. © The original batteries are supplied charged and can be used immediately after purchase, however it is recommended that the battery be fully charged before fi rst use. The battery needs to be charged in time before it is completely discharged. During long periods of storage, it is recommended to keep the battery charging level at about half capacity to extend its service life.

FUNCTIONAL CHARACTERISTICS

This product can be used indoor and outdoor.

MAINTENANCE AND SAFETY INSTRUCTIONS

During long periods of storage, it is recommended to keep the battery not fully charged to extend its service life. Do not store with discharged battery.
Clean only with soft and dry cloths. Do not use chemical detergents.

ATTENTION! Do not look directly at LED light beam. It’s forbidden to use the product with damaged light diff user. Do not disassemble the sealed body of the lamp as this may compromise performance and void the warranty. Product must not be used in unfavorable conditions, e.g. vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. The rechargeable battery inside the lamp is non-replaceable. If the battery is damaged or its operation life has expired, please contact manufacturer or distributor for service. The LED light source inside the lamp is not replaceable. If the LED light source is damaged, the lamp cannot be repaired. Used or damaged product should be disposed of in accordance with applicable regulations.

STORAGE AND TRANSPORTATION

Before delivery to the direct point of sale, the product must be stored in the manufacturer’s packaging at a temperature from -20°С to +40°С, in a dry room and without exposure to direct sunlight. Transportation can be carried out by land, sea, air transport in the manufacturer’s transport packaging

WARRANTY

The warranty period for the product is indicated on the individual packaging and begins from the date of sale. During the warranty period, a faulty product can be exchanged or returned with prove of purchase and all components and accessories preserved. The following does not apply with the scope of limited warranty:
– Misuse the product and cause the products components damage;
– Unauthorized disassemble or the presence of deep mechanical damage to the product;
– Damage due to force majeure.
The manufacturer shall not be responsible for any damage resulting from the failure to follow above instructions. The manufacturer reserves the right to make amendments of this user’s manual. The manufacturer reserves the right to provide technical changes.

CUSTOMER SUPPORT

www.videx.ua
Producer/Producent: Allegro Opt Sp. z o.o., Handlowa 23, 05-120 Legionowo, Poland.
Made in P.R.C. Store unused for no more than 2 years.
www.videx.com.pl

References

• Manufacturer of lighting in Poland - VIDEX
• Офіційний інтернет-магазин Videx.ua

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>