belkin AUC007 SoundForm Pulse Noise Cancelling Earbuds User Manual

SoundForm™ Pulse
Noise Cancelling Earbuds
User Manual

SKU/MODEL: AUC007

AUC007 SoundForm Pulse Noise Cancelling Earbuds

Federal Communications Commission Interference Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc. El Segundo, CA 90245, USA declare under our sole responsibility that the product, AUC007, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID: K7SAUC007
IC: 3623A-AUC007
HVIN: AUC007
Innovation, Science and Economic Development Canada Statement
CAN ICES-3 (B)/NMB-003(B)
This device complies with ISED’s license-exempt RSS standards. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Simplified EU Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the product, AUC007, to which this declaration relates, is in conformity with RED Directive 2014/53/EU and (EU) 2015/863 RoHS Directive 2011/65/EU (Recast). The full text of the EU declaration of conformity is available at the following Internet address: belkin.com/doc
Radiation Exposure Statement: This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
The operating frequency bands and the maximum transmitted power limit are listed below:
2402-2480 (Bluetooth) MHz <20 mW
Operating frequency for wireless charger: 111-200KHz for receiving only
UKCA Conformity:
Radio Equipment Regulations 2017 (S.I. 2017/1206)
Disposal Information for User
For information on product disposal, please refer to http://www.belkin.com/uk /weee-regulations/
Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE).
The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment.
Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.

Safety Instructions

High sound pressure – To prevent possible hearing damage, do not listen at high volume levels for long periods.
Do not use headphones when it’s unsafe to do so like while driving, operating heavy machinery, or whenever you need to pay attention to your surroundings.
This product contains small parts, which may be a choking hazard. Keep this product out of reach of small children.
Clean only with dry soft cloth.
Do not store your device in very hot or very cold areas. Operating Conditions: 0° C to 40° C

• Keep small cells and batteries which are considered swallowable out of the reach of children.
• Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 h of ingestion.
• In case of ingestion of a cell or battery, seek medical assistance promptly.

Do not expose to rain or snow. Keep away from heat sources, direct sunlight, combustible gas, water, or other liquids. Do not expose to fire or excessive temperature.
Do not use if visible defects are observed on the product.
Do not attempt to service or disassemble. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
If you experience problems with the product, please discontinue use, and contact Belkin for assistance.
Do not subject the headphones to crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on the headphones.

Hanger folded in case pack

Die Line File: IDL_AUC006_SAP218 SOUNDFORM FLOW NOISE CANCELING EARBUDS
Artwork File: REV C 00
Business Unit: Core
Program Manager: Andrew Camba
Packaging Engineer: Matthew Duffy
Retail Outside Dimension (Including Hang Tab)
L x W x D (in):
L x W x D (mm):
DIE/MATERIAL SPECS:
Material: 350gsm C1S SBS (20pt)
Blank Size (in): 51+7/32 x 28.931
Blank Size (mm): 1300.957 x 734.845
This dieline works for following skus (if any):
Unit: IN/MM
Side Shown: PRINT SIDE
Flute/Grain: vertical
Tolerance:+/- 1/32″ – 0.8mm
Drawing Scale 1:1
RELEASE DATE: 03/30/2022
DIELINE:
Intermediate
THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST DO NOT PRINT
DIE LINES, PRINTERS NOTES

Belkin International, Inc.
El Segundo, CA 90245, USAl
03-5767-6029
00-12:00, 13:00-17
japansupport@belkin.com
Belkin Tech Support:
www.belkin.com/support
Made in Vietnam.
belkin.com
8850bt01672 R

References

• Mobile & Computer Accessory Products | Belkin US
• Belkin Official Support - European Declaration of Conformity (Page 1)
• belkin.com/uk/weee-regulations/
• Mobile & Computer Accessory Products | Belkin US
• Belkin Official Support - European Declaration of Conformity (Page 1)
• Live Chat, User Guides, FAQs & More | Belkin Support US
• Be Ready For Today | Belkin UK
• belkin.com/uk/weee-regulations/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>