Westinghouse PW6IN1 Quick Change Nozzle for Pressure Washers Instruction Manual
- June 9, 2024
- Westinghouse
Table of Contents
Westinghouse PW6IN1 Quick Change Nozzle for Pressure Washers
Information
WARNING
User must read and understand the operator’s manual for their pressure washer before using this accessory to reduce the risk of injury. Before beginning any cleaning activity, spray the pressure stream in a safe direction to make sure that all accessories are connected properly in order to minimize the danger of injury or property damage. Fits most pressure washers. Before using this attachment, make sure it is compatible and is correctly installed. Risk of fluid injections. Do not point at people, pets, electrical devices, or the unit itself. Wear eye protection designated to conform with ANSI Z87.1. Before adding, replacing, or modifying accessories, turn off the pressure washer, release the water pressure in the trigger handle, and lock the trigger handle’s lock out (if one is provided with your pressure washer). Use only with cold water and only outdoors. Store the accessory indoors. Save these guidelines. Use them to train other users and refer to them frequently. Give the user of the tool these instructions as well.
PRODUCT SPECIFICATIONS
- Connection 1/4 in. Quick Connect Plug Inlet
- Maximum Pressure up to 3600 psi
- Maximum Water Flow 4 GPM
- Maximum Water Temperature 140°F
APPLICATIONS
You may use this product for the purposes listed below:
- Cleaning siding, polished and painted metal surfaces, outdoor furniture fabrics, plastics, fiberglass, glass, and vehicles
- Spray lance [lanza pulverizadora, lance d’arrosage]
- 6-in-1 nozzle (boquilla 6 en 1, buse 6 en 1)
INSTALLING THE QUICK-CHANGE NOZZLE
This attachment installs on the end of the spray lance same as any nozzle as described in your pressure washer’s operator’s manual.
- If necessary, remove the nozzle from the end of the lance.
- Pull back the quick-connect collar on the lance and insert the 6-in-1 quick change nozzle. Push forward to secure the collar.
NOTE: Be sure the nozzle is securely locked into the spray lance.
USING THE QUICK CHANGE NOZZLE
Rotate the nozzle dial and align the arrows to the desired setting. Use the following settings for recommended applications: 0° for spot cleaning or difficult-to-reach areas; 15° and 25° for general purpose or large surfaces; 40° for cleaning decks, fences, and siding. SOAP/jet allows for long-range soap application and SOAP/fan for short-range soap application.
NOTE: Before use, test the selected spray setting away from people, pets, electrical devices, and other objects.
Service Hotline: 855-944-3571 777 Manor Park Drive, Columbus, OH 43228 and Westinghouse are trademarks of Westinghouse Electric Corporation. Used under license by MWE Investments, LLC. © 2022 MWE Investments, LLC All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>