MONACOR IT-12M Interpretation System Base Unit Instruction Manual
- June 9, 2024
- MONACOR
Table of Contents
MONACOR IT-12M Interpretation System Base Unit
IT-12M
Order No. 0173720
Interpretation system, base unit, for setting up a multilingual interpretation system.
- 12 languages (floor language/main language and 11 translations via interpretation console IT-12D)
- Slow-down signal
- Alarm function, audio message or audio alarm signal can be fed to each output
- Status LEDs for interpretation channels
- Microphone connection via comb. jack on the front panel
- 48 V phantom power supply
- 12 V power supply connections for wireless transmitters TG-10STX/1, available at option
- 482 mm (19“) rack installation with supplied mounting brackets
IT-12D
Order No. 0173710
Interpretation console, as an addition to the base unit IT-
12M.
- Up to 11 interpretation consoles can be cascaded
- 2 channels, one of which is active, the other serves as a standby channel
- Interpreting channels can be stored permanently at the console
- Last active channel will be stored after switching off the operating voltage and will be available again immediately after switching on the device
- 2 simultaneous interpreters/commentators to use the active channel at the same time
- Headset connection with volume control
- Microphones can be switched off or muted, cough button
- Balanced XLR jacks for connecting additional microphones
- Relay interpreting via 11-step language selector
- Low-noise push-buttons for switching between relay language and floor language
- Protocol of interpretation via 2 record outputs
- Slow-down button
- Robust and stable metal housing
- Power supply via base unit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>