FlINQ A5 Pure Sensor Bin User Manual

: June 9, 2024
: FlinQ

Table of Contents

A5 Pure Sensor Bin
Installing process
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FlinQ Pure Sensor Bin
User Manual

A5 Pure Sensor Bin

Instructions
Please read the instruction carefully before using this product.

FlINQ A5 Pure Sensor Bin - Instructions

On / off button
Press the button for 3 seconds to switch on
Sortable waste bin
Extremely suitable for storing daily rubbish, including food waste and general waste.
Multi-purpose drawer
Drawer features a removable divider perfect for separating different types of recycling.
Photocatalyst function
Non-woven fabric containing photocatalyst particles
Battery case
Installing 6pcs AA batteries
Keep open & close switch /sanitize switch
430 Stainless steel bin body
Matt finished & anti-fingerprint
Wheel design
More convenient and user-friendly to take out the drawer.

Installing process

Take every part of the sensor bin
Take out the lid and put the lid upside down
Install the batteries
Put the lid upside down and open the battery case. Installing 6 pcs of AA batteries into the case in accordance with the instruction picture. Finally, seal the cover of the battery case.
Placing garbage bags
A. General sortable dust bin
Sortable double bins design. Take out the inner bucket, then put the trash bag into the bucket and stuff the extra part into the hole. Finally, put the inner bucket back into the trash can.
B. The drawer
Slowly take out the drawer, with a removable divider to separate the bin. The trash bag can be fixed in the gap of the divider or stuff into the storage hole at both sides of the bin.
Switch on
Press the power switch on the left button at the screen for 3seconds, the automatic sensor system starts to work.
Instruction sensing function
When rubbish or any part of your body is close to the sensing area（approx.15-25 cm), the lid will open automatically. After leaving the sensing area, the lid will turn off automatically after about 5 seconds.
Manual operation
Press the button on the left to manually open and close the bin lid. The lid will stay open for 5 minutes.
Sterilization
A. Manual sterilization
Press and hold the right button for 3 seconds to open the photocatalytic sterilization function, which operates for 10 minutes. Sterilization process induction switch cover function can still run, while the button long open function is temporarily disabled. The sterilization process can be terminated in advance by pressing the right button again.
B. Intelligent sterilization
Since the power is turned on, photocatalytic germicidal efficacy automatically starts every 12 hours. The sterilization process induction switch cover function can still run, while the button long open function is temporarily disabled. The sterilization process can be terminated in advance by pressing the right button again.

Trouble	How to solve
Lid opens unusual	1. Check whether the batteries are installed properly

according to “+” “-” instruction or check whether lithium battery incurs low power ,and then re-open the power source switch.
2. Check whether the sensing area is dean or not, please use a neat cloth to wipe if it is dirty.
Lid closes unusual| 1. Check whether the sensing area is dean or not, please use a neat cloth to wipe if it is dirty
2. Check whether eclectic circuits are damp. If so, please do not connect power source. You can only use the bin if it is dry.
3. Check whether there is any obstacles around the lid. If yes, please remove it.
Lid opens slowly| 1. Dry battery may incur low power, please replace it.
2. Lithium battery may incur low power, please recharge it in time.

Note
If these solutions do not work, please contact us in time. Do not repair the waste bin yourself.

When you install the batteries, please take note of the +/- instructions.
Be sure to use a neat cloth to clean the trash bin. Do not flush the trash bin.
Water can damage inner electric elements. Do not switch on power if there is water inside the trash bin.
Do not push or flip the lid to prevent it from damaging.
When power users up, replace the batteries in time to avoid liquid leaking. This may cause damage to the electric elements.
Avoid to use the trash bin under sunlight or wet surroundings.
Keep sensing area clean to ensure normal function of the sensor.
Do not mix acidic batteries and alkaline batteries or rechargeable batteries and disposable batteries.
Do not repair the trash bin or replace elements yourself. The damage you may cause is not included in the warranty.