FlinQ FQC8208 Floor Lamp Xyro User Manual

FlinQ FQC8208 Floor Lamp Xyro

Thanks for purchasing this FlinQ product!

To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future Tips certain procedures may result in incorrect reading and us We.e hope that you will enjoy using your new product! If by any chance the item is damaged, defective or broken, you are covered with a warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual. deserve the right to make technical and design modifications in the course of continuous product development. Read and follow the instructions contained in this manual carry. Keep these instructions at a safe place for future reference.

Safety Information

• Please read this manual thoroughly before using the product. keep it in hand for future reference Warnings alert the user to potential serious outcomes, such as injury or adverse events to the user.
• Cautions alert the user to exercise the care necessary for the safe and effective use of the product. Notes contain important information that may be overlooked or missed.
• This product can be used indoors (see below for more in).
• This appliance may be used by children aged 6 and or,v and by persons with reduced physical, sensory or mental capacities or a lack of sufficient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers.
• Cleaning and maintenance must not be carried out by children without supervision. when must not be allowed to play with the appliance.
• Keep the packaging material away from children There is a risk of suffocation!
• Do not allow unsupervised children to clean or maintain this video.
• WARNING: Do not leave packaging material lying around careless This may become dangerous playing material for children risk of suffocation!
• DANGER: due to swallowing small parts. Keep these away from children. risk of suffocation!

SPECIFICATIONS

REMOTE CONTROL

• Buttons: 10x
• Button function: ON/OFF, SYMPHONY START/PAUSE, SPEED +/-, BRIGHTNESS +/-, LIGHT SWITCH, SYMPHONIC MODE +/-, RING COLOR
• Remote control type: RF433 radio frequency remote control
• Remote control distance: up to 30 meters (so open area)
• Remote control power supply: 3 AxAA batteries
• Control quantity: One remote control can control multiple light(only for single colors) or 1 light selectable for your choice

This product is a lifestyle product

• Read and follow the instructions contained in this manual careyfully Keep these instructions at a safe place for future reference.
• The operating life of the product will be less if the ambient temperature is higher than 45°C or lower than -10°C.

Product general description and contents

1. Lamp pole
2. Lamp foot base
3. Adapter + connection cable (2.5m) with USB plug
4. RF Remote control
5. Installation bolt + tool and user manual

MAIN USE CAUTIONS BEFORE INSTALLATION

NOTE

• Choose a stable, solid and supportive surface and make sure the lamp is set correctly.
• Make sure the cables cannot cause a trip hazard.
• Make sure there is enough ventilation around the advice and so not cover it at all times.
• This lamp is intended for inside use and the main power adapter and remote control is not waterpKroeoefp! away from water and only use indoors.
• WARNING: Keep the external adapter out of reach of children.
• Never charge this product in moisture conditions or in only charge it indoors, in a dry place.
• This is not a TOY, keep away from small children below 12 years.
• Do not open or disassemble the lamp or adapter yourself, this will void the warranty at all times.
• Do not disassemble, repair or modify the product by yourself as this may result into an electric shock.
• Do not look directly into the lamp beads as it could hurt yours.
• The led source is not replaceable.
• If the cable or adapter is damaged or broken please contact your seller for the correct replacement by the manufacturer.
• Do not stand, sit on, jump or throw with the lamp at all times.
• Do not throw this product in the air as it may cause damage by falling.
• Only use the lamp for its intended designed use as a light.
• Take good care of the product and clean it regularly.
• Never touch the plug contacts with sharp or metal objects.
• Use only the original power supply and original accessories.
• Do not use the device outdoors.
• Protect the device from special liquids and vapors.

NOTE

• Please note that the power port of the device should not be infiltrated by water Otherwise, it will cause a product failure.
• Do not charge or store the product in a place below℃ 0 or above 40℃, otherwise, the product performance will be reduced.
• It is a normal phenomenon that the temperature of the adapter rises during use.

INSTALLATION OF LAMP FOOT BASE WITH LAMP POLE

NOTE

• Do not connect the power cable or adapter to the power mains outlet yet!
• Please check if the lamp set is complete according to the package contents as described.

1. Place the lamp pole carefully on a table that is protected by a soft cloth or towel etc.
2. Take the lamp pole bottom screw side in one hand and bolt it with your other hand on the lamp foot base hole with the supplied tool and bolt. Fix it firmly but slowly, carefully.
3. Insert the USB connector cable end included into the approved adapter power connection to connect and insert it to the mains power Butlpbwer adapter input iAC100-240V 50/60Hz with output from DCE-3A (3400mA) max. Keep in mind this adapter is about waterproof and needs to be used only INDOORS.

OPERATION AND REM OTE CONTROL USE

First install 3x AAA (LR 03) 1,5V batteries (not included, optional). To open the battery cover at the back side use the included small plastic opening tool device and open it at the side of remote back cover and see the picture’s hereafter of how to do it step by step. Clean the battery contact and remote contacts before installing the batteries. Install the three batteries 1 by 1 and sure to use the correct polarity + and – inside the remote control housing. Put the battery cover back into its place and sure that all sides are correctly “clicked” and pushed inside the housing of the remote top housing.

The remote can be used for the change of colors, to dim the light, to speed up or down, start/pause function controls and the remote control is not waterproof! The maximum control distance is <30 meters without obstacles and in open space.

NOTE: Remove the batteries from the product if it will not be used for a long time (1 month or longer) or when the remote control is not working anymore (replace when needed).

1. ON/OFF
2. START/PAUSE
3. COLOR RING
4. SPEED + / COLOR TEMPER ATURE +
5. SPEED – / COLOR TEMPERATURE –
6. LIGHT SWITCH
7. BRIGHTNESS –
8. BRIGHTNESS +
9. SYMPHONIC MODE –
10. SYMPHONIC MODE +

BUTTON USE EXPLANATIONS

1. ON/OFF >>> Put the lam®N or OFF
2. START/PAUSE >>> ln the symphonic mode you can press to start and pause the lights way at any moment. Press the color ring first and then press start again, the light will now go into automatic play mode from the first set.
3. COLOR RING >>>Short press or slide the color ring with your finger to select the desired children in normally white mode ( 1 color static) you can adjust the color temperature with this ring.
4. SPEED +/coLOR TEMPER NATURE + >>When in symphonic mode or color mode you can increase the speed of the light. In white mode, you can adjust the color temperature upwards.
5. SPEED-/COLOR TEMPER ATURE- >>>When in symphonic mode color mode you can decrease the speed of the light. In white mode, you can adjust the color temperature downwards.
6. LIGHT SWITCH >>>White mode colors only or switch back tool or/Symphonic mode.
7. BRIGHTNESS->>>The brightness can be decreased in bottler/Symphonic mode.
8. BRIGHTNESS + >>>The brightness can be increased and Color/symphonic mode.
9. SYMPHONIC MODE- >>>Several moving and special mods-colors etc can be selected downwards.
10. SYMPHONIC MODE+ >>>Several moving and special mods’ colors etc can be selected upwards.

USE ONE REMOTE ON MORE LAMPS AT THE SAME TIME

One remote can be used on one lamp or with more lamps the same time. You can “par” the remote and the floor lamp within a range of <5 meters of the lamp. To pair and use the remote with only 1 lamp in one room/spa please:

1. Make sure the lamp is ON.
2. Long press the LIGHTSWITCH button for 5-6 seconds, the light will fast quickly Sx to confirm that is paired with 1 remote control wo

To pair and use the remote with more than 1 lamp in the samore room/space optional to buy more lamp sets separately at wwflinqproducts.nl ) please:

1. Make sure the lamp is ON.
2. Long press the LIGHT SWITCH button for 5-6 seconds, and the light will flatly 5x to confirm that the lamp is paired for use with more than 1 remote control.

Note: Make sure when you to this process that other optional bought lamps are switched before pairing.

SECURITY AND IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, certain precautions must be followed, including the following:

• READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
• This IP20 product is suitable for indoor use.
• Please use the rated input voltage power supply of the product as mentioned on the back label.
• Do not install near a gas device or other sources with a similar heating process.
• Do not use the product outside its intended use.
• Read and follow all instructions that are indicated on the product or supplied with it.
• Keep this manual for future reference.

INSTRUCTIONS FOR USE AND MAINTENANCE

In case of non-use, store the product in a cool and dry place away from direct sunlight.

CAUTION: NON- Replaceable LED lights!

TROUBLESHOOTING TIPS IF THE LIGHT DOES NOT WORK

Light does not turn on?

• Button use >>> Try to power on/off by the button remote or re-connect t UhSeB cable connection or adapter from the main power outlet.
• Remote control not working >> The RF signal may be weak when there is a strong visible light or bar Nieormal range should be effective within 30 meters.
• Or remove the old batteries by opening the battery cover and remove of the cover from the remote con Ttarkoel. notice of the positive (+) and negative (-) side of the batteries, and make sure that the new batteries (AAA 1,5V) is inserted the right yw. Click the cover back on and dispose of the old battery response ill.
• Not working >>> Is the battery full from the remote? Please replace and me measure the adapter is connected to the mains power and try.
• Poor distance >>> Use it inside a range of max. 30 meters without any obstacles. The battery runs out too quickly?
• Weak battery: We suggest only using dry alkaline batteries from Am-brands.

NOTE: If the lamp does not work or respond in any possible way by the remote please disconnect the power adapter from the mains power outlet and wait for at least 15min and then re-connect it again.

CLEANING THE DEVICE ITSELF

• Make sure the lamp is kept dust-free and clean C. lean it regularly with a dry anti-static cloth and with warm, soapy water but me sure that no water liquid can enter the lamp luminaire. Dry the lamp before turning is not again.
• Please do not immerse the main unit in water it is not waterproof!
• Wipe gently with a clean soft cloth (hm microfiber) dampened with water or a mild detergent.
• Do not use a strong irritant lotion such as gasoline, alcohol or rubber water

This product is designed, produced, and tested in accordance with the strictest European safety directives and test standards.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

Disposal Information

Separate collection. This symbol means the product must not be discarded with the general household w Tashteer.e is a separate collection system for these products.

WEEE, the waste electrical and electronic equipment direct this marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working l Tifoe .prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase. This product should not be mixed with other commercial wastes for disposal. Do not dispose of batteries in your household waste. Dispose of batteries by taking them to your local recycling store or station, contact your local government office for more details.

DISCLAIMER

Information in this document is subject to change without not Tichee the manufacturer does not make any representations or warranties (implied or otherwise) is regarding the accuracy and completeness of this document and shall in the event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and systems without the expressed written permission of the manufacturer Our company owns all rights to this unpublished work and intends to maintain this work as confirm company may also seek to maintain this work as an unpublished copyright. This publication is to be used solely for the purpose of reference, operation, maintenance or repair of our equipment. No part of this can be disseminated for other purposes. In the event of inadvertent or deliberate publication, our company intends to enforce its right to this work under copyright laws as a published work. Those having access to this manual may not copy, disseminate or disclose the information in this work unless expressly authorized by our company. All information contained in this manual is belied to be correct. Our company shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance, or use of this mat ethicist .publication may refer to information and is protected by copyrights or patents and does not convey any license under the patent rights of our company, not the rights of others O. ur company does not assume any liability arising out of any infringements of patents or other rights of third parties described at any time without notice or obligAalstoio, the content of the manual is subject to change without prior notice.

Warranty

The warranty begins on the date of purchase and expires after 24 months. This warranty period is considered to have started three months after the date of manufacturing indicated on the product or as derived from the serial number of the product. If any defect due to faulty materials and/or workmanship is within the warranty period, we will make arrangements for service W. here a repair is not possible or is deemed uneconomical we may agree to replace the product. Replacement will be offered at our discretion and the warranty will continue from the date of the original pure. warranty applies provided the product has been handled properly for its intended use and in accordance with the operating instructions. Support, warranty, and questions information: info@flinqproducts.nl This product is designed, produced, and tested in accordance with the strictest European safety directives and test standards.

EU DECLARATION OF CONFORMITY

Hereby we:   Conform that the products mentioned are with the following safety and hazardous substances restrictions in electrical and electronic equipment requirements of the relevant European Union harmonization directives 2014/53/EU, 2014/30/EU, (EC)2019/1021, (EC)NO 850/2004, (EC)NO 1907/2006, (EU)2015/863, (EU)2017/2102, 2011/65/EU, 2012/19/EU and all amendments. Conformity Is guaranteed by the CE symbol. This product has been tested following harmonized standards and EU community legislation specifications, applying versions will be valid in March 2021. The full text of the EU declaration of conformity is available at the following internet address: www.flinqproducts.nl

• Company: FlinQ Commerce
• Address: Eemweg 74, 3755 LD Eemnes, The Netherlands
• Declare under the sole responsibility that the following equipment: TECHNICAL CHANGES SUBJECT TO FURTHER DEVELOPMENTS.
• Product brand: FlinQ Commerce
• Product name: Design Floorlamp Xyro
• Product Number: FQC8208
• HARMONISED STANDARDS
  • EN 55015:2019
  • EN 61547: 2009
  • EN 61000-3-2: 2019
  • EN 61000-3-3: 2013+A1:2019
  • EN 301 489-1 V2.2.3(2019-11)
  • EN 301489-3 V2.1.1(2019-03)
  • EN 300220-1 V3.1.1(2017-02)
  • EN 300220-2 V3.2.1(2018-06)
  • EN 62479：2010
  • EN 60598-1:2015+A1:2018
  • EN 60598-2-4:2018，
  • EN 62031:2008+A1:2013+A2:2015
  • EN 62493:2015
  • IEC 62321-5:2013
  • IEC 62321-4:2013+AMD1:2017
  • IEC 62321-7-1:2015
  • IEC 62321-7-2:2015
  • IEC 62321-6:2015
  • IEC 62321-8:2017
  • AfPS GS 2019:01 PAK
• Product Rating: DC 5V 3000mA = 3A max
• Product type: Floor lamp
• Authorized signature:
• Name: Erwin honing
• Title: CEO FlinQ commerce
• Place: EEMNES
• Date: 31-03-2021

EU COMMUNITY LEGISLATION

• Electromagnetic Compatibility Directive (EMC) 2014/30/EU
• Radio Equipment Directive (RED) 2014/53/EU
• Reduction of Hazardous Substances (ROHS) Directive 2011/65/EU + 2015/863/EU and (EU)2017/2102
• REACH Regulation 1907/2006
• Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU
• Regulation on Persistent Organic Pollutants (POP) 2019/1021
• Product Safety Act PAH AfPS GS 2019:01 PAK

References

• FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>