westfalia Fusion MX 12 B2B purchase Cordless vacuum cleaner User Manual

: June 9, 2024
: Westfalia

westfalia Fusion MX 12 B2B purchase Cordless vacuum cleaner

westfalia-Fusion-MX-12-B2B-purchase-Cordless-vacuum-cleaner-
product

Dear customer,
we are pleased that you have chosen our Clever Clean Fusion MX 12 vacuum cleaner. Hard to reach places can be reached easily with the crevice nozzle and the upholstery nozzle is especially gentle to your sofas and armchairs.
To ensure that this vacuum cleaner is used correctly, please read the instructions carefully beforehand. Always follow all safety instructions. The importer and manufacturer accepts no liability if the information in this manual is not observed. These instructions must also be included when passing on the device. Please note: The illustrations used in these operating instructions may differ from the actual device. It is an integral part of the device. If you have any questions about the device, spare parts or accessories, please contact our customer service via our e-mail address: kundenservice@hsphanseshopping.de

SYMBOLS

Safety instructions:
Read carefully and follow to avoid personal injury and damage to property.
Read operating instructions before use!
Use indoors only!
Circuit symbol for direct current
The CE marking confirms that the appliance complies with the applicable European requirements that apply to the respective group of appliances and that the specific declarations of conformity are available.
Protection class II – protection by double or reinforced insulation. The protection class is used to identify and classify protective and safety measures on electrical equipment to prevent electric shock. All devices in protection class II have double or reinforced insulation. The double or reinforced insulation ensures that the electrically conductive parts or electrically conductive surfaces of the equipment cannot be touched.
Data protection information – old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.

INTENDED USE

The appliance is intended only for household or car use and for vacuuming on dry surfaces. The appliance is designed for private use and is not suitable for commercial purposes.
Do not use the vacuum cleaner outside or on wet surfaces.
Do not vacuum the following things under any circumstances:
- Point or hard objects (e.g. larger glass splinters)
- Flammable or inflammable substances
- Glowing ash, cigarette butts, matches, etc.
- Very fine dust, toner or ashes
- Liquids or wet dirt (danger of electric shock)
Only use the device as described in the instructions. Any further use is considered to be contrary to the intended purpose.
Excluded from the warranty are all defects caused by improper handling, damage or attempted repairs. This also applies to normal wear and tear.

IMPORTANT SAFETY INSTRUCTIONS

It is imperative that you read all the safety information and instructions listed here carefully. Failure to follow these instructions may result in electric shock, fire and/or injury.

This device may be used by children 8 years of age and older and by persons with limited physical, sensory or mental abilities or lack of experience and knowledge, if they have received instructions on the safe use of the device and understand the dangers involved or are supervised in its use.
Children are not allowed to play with the vacuum cleaner.
Cleaning and maintenance of the device must not be carried out by children without supervision.
Keep children away from packaging material, there is a danger of suffocation!
Only use and store the device out of the reach of children and animals. Improper use may result in personal injury or electric shock. The mains cable must also be out of reach of children and animals.
Never touch the mains plug or the appliance with wet hands.
Never immerse the vacuum cleaner, power cord or plug in water or other liquids and ensure that they do not fall into water or get wet.
Only charge the battery with the supplied AC adapter. Do not charge other devices with the supplied AC adapter.
Disconnect the adapter from the mains when it is not in use.
Only use the device if all components are undamaged! Check this before each use / before each charging procedure!
Only use the vacuum cleaner if it is completely and correctly assembled! The collection container and filter must be correctly inserted. The filter must not be damaged.
Do not insert any objects into openings in the unit. Do not use the unit when an opening is blocked. Remove blockages caused by dust, lint, hair, etc. as these may reduce the airflow.
Make sure that hair, loose clothing, fingers and other parts of the body do not come into contact with openings or moving parts, such as the brush roller. Do not point the hose, tube, or nozzle at eyes or ears or put it in your mouth.
Never vacuum people or animals with the device, as there is a risk of injury.
Always switch off the vacuum cleaner before changing accessories, emptying the waste container or cleaning the appliance.
Never attempt to remove a blockage while the unit is running.
Do not cover the appliance during charging or operation, as there is a risk of fire.
If the charging station falls into the water, immediately disconnect the power supply. Do not try to pull the charging station out of the water while it is connected to the mains.
The device must not be used in rooms containing highly flammable substances or toxic or explosive vapours.
Only use accessories recommended by the manufacturer.
Have repairs to the unit carried out only by a specialist workshop.
Make sure that the power cord is not a trip hazard.
Do not bend or squeeze the power cord, and do not place heavy objects on it.
Only use the device when it is completely and correctly assembled! The dust container and the HEPA filter must be inserted and undamaged! If the dirt were to get inside the motor unit, the motor could be damaged.

DANGER FROM RECHARGEABLE BATTERIES

Before inserting the battery pack, check that the contacts are clean or clean them if necessary.
If the battery has leaked, avoid contact of skin, eyes and mucous membranes with the battery acid.
In case of contact with battery acid, rinse the affected areas immediately with plenty of clear water and seek medical attention immediately.
Remove a leaking battery from the device immediately. Clean the contacts before inserting a new battery.
The battery must not be disassembled, thrown into fire, immersed in liquids or short-circuited.

SCOPE OF DELIVERY

Motor unit (main unit)
Dust container
Cyclone filter
Hepa filter
Extension tube with articulated joint
Electric floor nozzle
Crevice nozzle
2 in 1 upholstery / brush nozzle
Power supply
Rechargeable battery
Wall bracket with integrated charging cradle
Mounting material
Manual

The electric floor nozzle is suitable for both carpets and smooth floors. It has a rotating cleaning brush for better absorption of hair and lint.
The brush nozzle is used for vacuuming upholstery and textiles and for removing dust from sensitive objects such as picture frames, lampshades, keyboards, books, etc. The brush nozzle is also used for the vacuuming of upholstery and textiles.
The crevice nozzle is suitable for hard-to-reach areas such as corners, joints or niches, e.g. for upholstery and interior cleaning of passenger cars . westfalia-Fusion-MX-12-B2B-purchase-Cordless-vacuum-cleaner-fig
1

DEVICE OVERVIEW

westfalia-Fusion-MX-12-B2B-purchase-Cordless-vacuum-
cleaner-fig 2

ACCESSORIES

westfalia-Fusion-MX-12-B2B-purchase-Cordless-vacuum-cleaner-
fig 3

BEFORE FIRST USE

Remove all packaging material and any labels, transport protection stickers, etc. before first use. Warnings and type plates must not be removed!
Fully charge the battery before initial operation (see chapter „Charging the battery“).

BATTERY CHARGING

Only charge the battery with the supplied AC adapter.
Do not cover the battery and AC adapter during charging.
When charging, the battery may be inside the device or charged separately. The wall mount also acts as a charging cradle, and the power cord can be connected directly to the wall mount. In this case, the battery will charge whenever the unit is mounted in the wall bracket.
Do not use the device while the battery is charging or while the power cord is connected to the battery.
Before first use, as well as after each complete discharge of the battery, it must be fully charged before further use.
Before inserting the battery into the device, check the contacts for cleanliness.
If an error occurs during charging, disconnect the power immediately.
Always connect the supplied power cord first to the battery or charging cradle (wall mount) and then to a wall outlet.
Never pull the plug by the cable from the charging socket or from the socket.
When you charge the battery in the device, the charging status is indicated by LEDs on the back of the handle unit.

ASSEMBLY

Push the battery straight into the motor unit from below until it audibly clicks into place. Make sure that the battery is not tilted or inserted the wrong way round. Make sure the battery is securely engaged before connecting any other accessories to the main unit.
The crevice nozzle or the 2 in 1 upholstery nozzle can be placed directly onto the suction opening. Make sure that the nozzles are only pushed on hand-tight to avoid damage and injury.
The electrical floor nozzle must be pushed straight onto the suction opening so that the electrical connection can be made at the bottom of the nozzle with the main unit. The electric floor nozzle audibly engages with the main unit.
As an option, you can also use all nozzles with the extension suction pipe. Place the extension suction pipe straight on the suction opening so that the electrical connection is established. The extension suction pipe also audibly engages.
If the extension suction pipe or the electric floor nozzle are to be separated from the main part, press the respective unlocking button on the suction pipe or floor nozzle and remove the respective part from the suction opening. The crevice nozzle and the 2 in 1 upholstery nozzle do not engage and can therefore be easily removed from the respective suction opening.
Replace all accessories only when the appliance is switched off!

EMPTYING THE DUST CONTAINER

Empty the dust container only when the unit is switched off.
Press the release button on the top of the dust container to open the dust container flap.
Empty the dust container directly above an open waste bin. The distance to the bin should be as small as possible so that the dust is not distributed in the environment.
Close the flap again until you hear it click into place.

HEPA FILTER CLEANING / REPLACEMENT

Clean / replace the HEPA filter only when the unit is switched off.
Cyclone filters and HEPA filters are not suitable for washing machines, dishwashers or dryers.
Before cleaning/replacing the HEPA filter, please empty the dust container (see chapter Emptying the dust container).
Remove any accessories from the suction opening of the main unit.
Press the release button on the top of the main unit and then turn off the dust container.
Then pull the dust container forward from the main unit.
Cyclone and HEPA filters can now be pulled out of the dust container by grasping the two round openings on the Hepa filter with two fingers.
The Hepa filter can then be separated from the cyclone filter by turning it.
The cyclone filter can be cleaned with a damp cloth.
The HEPA filter must NOT be cleaned with water. Knock out the HEPA filter or clean it carefully with a soft brush.
The assembly is carried out in reverse order.

OPERATION

Make sure that there are no large, sharp objects on the surface to be cleaned.
If the dust container is too full during use, empty it. Empty and clean the dust container after each use. The Hepa filter must also be cleaned regularly to avoid overloading the motor.
Switch off the device after each cleaned surface, thus significantly increasing the operating time per battery charge.
When the device is switched on, the charge status of the battery is indicated by the LED display on the back of the device. When the battery is fully charged, all LEDs light up, and when the battery becomes weaker during use, the number of LEDs light up is reduced.
Select accessories as required and attach to the unit.
Switch on the device. To do this, press the on/off switch firmly once, it engages and the unit immediately starts the suction process. To switch off the unit, press the on/off switch again.
Move the unit over the area to be cleaned.
Switch off the appliance after vacuuming.
For optimum performance of the unit, empty the dust container after each use and clean if necessary.

Use of the articulated joint on the suction pipe
Unlock the articulated joint by pressing the unlocking button on the underside of the suction pipe. This will allow you to easily reach hard-to-reach places, such as under furniture.
If you no longer need the knee joint, bring it back into a straight position and make sure that the locking mechanism clicks audibly into place again.

Turbo Boost Function
The device is equipped with two Turbo Boost levels. This significantly increases the suction power, but reduces the operating time per battery charge when the Turbo Boost function is switched on.
To activate the Turbo Boost function, touch the Boost button on the back of the unit in the middle of the LED battery charge indicator. The Turbo Boost function has two levels: a single press switches to the first level, another press switches to the second level. To switch off the Turbo Boost function again, touch the button again.

CLEANING

Only clean the main unit, the battery and the electric floor nozzle with a dry cloth, do not use water or other liquids.
Do not use abrasive cleaning agents for cleaning.
Dust container, cyclone filter, crevice nozzle and the 2 in 1 upholstery nozzle can also be cleaned with a damp cloth. Please note that all parts must be completely dry before assembly and re- commissioning.
The extension suction pipe can also be cleaned from the outside with a damp cloth, but the electronic plug connections on both sides of the pipe must not be cleaned with a damp cloth.
The extension suction pipe can also be cleaned from the outside with a damp cloth, but the electronic plug connections on both sides of the pipe must not be cleaned with a damp cloth.
To clean the electric floor nozzle, the brush can be removed from the floor nozzle. To do this, open the cover on the right side of the floor nozzle by pressing the two small plastic noses together with two fingers. Then pull the brush together with the black flap out of the floor nozzle.
Remove impurities from the brush and floor nozzle, do not use water or other liquids.Replace the brush in the floor nozzle, making sure that the brush and flap are correctly aligned. Slide the brush all the way into the floor nozzle until the flap audibly engages.

STORAGE

Store the device in a cool, dry place away from direct sunlight and out of the reach of children and animals. If the device will not be used for a longer period of time, remove the battery from the device.

TROUBLESHOOTING

If the device does not function properly, check whether a problem can be solved by yourself. If the above steps do not solve the problem, contact customer service.

Do not attempt to repair an electrical device yourself!

Issure	Possible cause / solution
The unit works slowly or does not start.	• Is the battery empty? Charge the

battery.
The suction power is too low.| • Is the battery too weak? Charge the battery.

• Is the dust container full? Empty the dust container.

• Is the HEPA filter very dirty? Clean according to chapter „Cleaning“.

• Is the suction opening blocked? Switch off the appliance and remove the blockage.

• Some particles may also be stuck to the carpet or too large/too heavy to be picked up by the unit. Remove these particles by hand.

When vacuuming, dust escapes from the unit.| • Check that the dust container and filter holder are correctly inserted and correct the seat if necessary.

• Check whether the dust container is closed.

• Is the HEPA filter very dirty? Clean according to chapter „Cleaning“.

• Is the HEPA filter worn or damaged? Replace the HEPA filter.

The battery is not charging.| • Is the power supply correctly connected?

• Is the socket defective? Try another socket.

• Check the fuse of the mains connection.

Strange smell

| ****

• At the first use of the device, a new smell is normal, it disappears with time.

TECHNICAL DATA

Item number: 2837 (black/rose gold)

Appliance

Power supply: 29,6V (Li-Ion 2500mAh)
Power: 300 W

Rechargeable Battery

Charging time: approx. 4-5 hours
Operating time: up to 80 minutes (with fully charged battery)

Power supply

Entry: 100-240 V~ 50/60 Hz
Exit: 35 V DC, 500 mA
Protection class: II

DISPOSAL

In connection with the batteries and rechargeable batteries placed on the market by us or with the delivery of devices containing batteries or rechargeable batteries, we are obliged to inform you of the following in accordance with the Battery Act (BattG): The symbol of the crossed-out dustbin means that batteries and rechargeable batteries must not be disposed of with household waste.
If the battery or accumulator contains more than 0.0005% mercury by mass, more than 0.002% cadmium by mass or more than 0.004% lead by mass, the symbol outside the crossed-out dustbin is extended by the chemical symbols of the metals (Hg, Cd, Pb). As an end user, you are legally obliged not to dispose of all spent batteries and accumulators in household waste, but to return them to retailers or municipal collection points. Used batteries and accumulators may contain harmful substances that can damage the environment or your health if not stored or disposed of properly. Returned spent batteries and accumulators are only recycled. This means that valuable raw materials such as iron, zinc, manganese or nickel are recovered. You can either return used batteries or accumulators free of charge in your immediate vicinity (e.g. to a retailer or recycling centre) or send them back to us free of charge. The environment and HSP Hanse Shopping GmbH thank you.
The symbol of the crossed-out dustbin indicates that this appliance is subject to the EU Directive on Waste Electrical and Electronic Equipment (WEEE Directive). Do not dispose of this appliance
as normal household waste, but collect it separately and dispose of it in an environmentally sound manner at a municipal collection point. A black bar under the crossed-out dustbin indicates that the appliance was placed on the market after 2005.
The recycling symbol consists of three arrows that represent the reuse cycle (recycling). The packaging and filling materials can be recycled. Do not dispose of the packaging and filling materials in household waste, but take them to the recycling collection in an environmentally friendly way