logitech Z200 Stereo Speakers User Guide
- June 9, 2024
- Logitech
Table of Contents
logitech Z200 Stereo Speakers
KNOW YOUR PRODUCT
CONNECT THE SPEAKERS
- Connect the DC power plug to the back of your right speaker and connect your AC adapter to the electrical outlet.
- Connect to the 3.5 mm audio jack on your source device using the attached 3.5 mm auxiliary input on the right speaker.
- You can also connect a device to the auxiliary input port on the front of the right speaker.
- (Optional) Connect your headphones to the headphone jack on the front of the right speaker.
- Turn the speaker on using the power knob.
ADJUST THE VOLUME/TONE
- Increase (or decrease) the volume of speakers by rotating the control knob clockwise (counter-clockwise) on the right speaker.
- Scroll the tone control wheel on the side of the right speaker to increase (or decrease) the bass level.
www.logitech.com/support/Z200
© 2019 Logitech. Logitech, Logi and other Logitech marks are owned by Logitech
and may be registered. All other trademarks are the property of their
respective owners. Logitech assumes no responsibility for any errors that may
appear in this manual. Information contained herein is subject to change
without notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>