logitech Rally Plus Video Conferencing Kit User Guide
- June 9, 2024
- Logitech
Table of Contents
logitech Rally Plus Video Conferencing Kit
WHAT’S WHAT
TABLE HUB
- Power
- Mic Pod
- Future Expansion
- Connection To Display Hub
- HDMI 1 In
- HDMI 2 In
- Meeting Room Computer USB
- Future Expansion
- Security Slot
- Power LED
DISPLAY HUB
- Speaker
- Power
- Connection To Table Hub
- HDMI 1 Out
- HDMI 2 Out
- Meeting Room Computer USB
- Camera
- Security Slot
- Remote Control Pairing
- Power LED
CAMERA
- Remote control pairing button
- USB
- Status LED
- Security slot
- MIPI
- Tripod Thread
- Expansion Slot
REMOTE
- Bluetooth pairing
- Call answer
- Call end
- Microphone mute
- Zoom in/out
- Volume up/down
- Home
- Camera pan/tilt
- Camera presets
After completing the installation, the system can be checked by running the diagnostic application available at Logitech.com/support/Rally.
MAKE RALLY PLUS THE DEFAULT DEVICE
Ensure that RALLY PLUS is chosen as the camera, speaker and microphone in your
video conferencing applications. Please consult the application documentation
for further instructions on how to do this
STARTING A VIDEO CALL
After installing RALLY PLUS and ensuring it is the default device in your
video conferencing application, simply start the application in the normal
manner and enjoy the benefits of improved audio and video
PAIRING RALLY PLUS TO A BLUETOOTH DEVICE
You can use RALLY PLUS for audio calls when paired to a Bluetooth device. To
pair your Bluetooth device to RALLY PLUS, follow these simple step:
- Press and hold the Bluetooth button on the remote control until you see a flashing blue light on the camera and microphones.
- Place your mobile device in Bluetooth pairing mode and select “Logitech Rally”.
- You are now ready to use RALLY PLUS for audio calls.
PAIRING A REMOTE CONTROL TO RALLY PLUS
RALLY PLUS and the remote control are paired at the factory. You can pair up to 5 remote controls to RALLY PLUS to make it easier to control the system in larger rooms. Or, if you need to pair a remote to the camera, such as when replacing a lost remote, do the following
- Press and hold the button on the camera until the LED flashes.
- Press and hold the button on the Display Hub until the LED flashes.
- Press and hold the Bluetooth button on the remote control until the LEDs on both the camera and Display Hub stop flashing.
- If the pairing fails, repeat from step 1.
CAMERA SETTINGS APPLICATION
Use this program to control the camera pan, tilt, zoom, focus, and image
quality (like brightness and contrast) from your computer. The software can be
downloaded from
www.logitech.com/support/Rally.
ENHANCING RALLY
There are several optional accessories that ease installation and allow RALLY PLUS to be used in larger rooms:
- Rally Mounting Kit : Mounting brackets for the Table Hub, Display Hub, Camera and Speakers.
- Extra Mic Pods : RALLY PLUS can support up to 7 Mic Pods allowing great flexibility in room size and configuration.
- Mic Pod Hub : Used to branch microphone routing and run most of the Mic Pod cabling is below the table. The Mic Pod Hub has 3 jacks that can be connected to a combination of Mic Pods or other Mic Pod Hubs.
- TV mount : Works with one of either the Camera or Speaker mounting brackets. The TV Mount can be used in pairs to mount the Camera and Speaker above and below the TV.
FOR MORE INFORMATION
You can find additional information on RALLY PLUS including:
- FAQs
- Software to enable functions in various application
- How to order replacement parts and more at www.logitech.com/support/Rally
© 2020 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its a liates in the U.S. and other countries. All other tradmarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice WEB-621-001379.003
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>