everActive BL-150R Dual Beam Bike Light User Manual
- June 9, 2024
- everactive
Table of Contents
Bike light BL-150R DualBeam
User manual
BL-150R Dual Beam Bike Light
- Switch on
- COB LED
- Power input
- Mounting bracket
- Side light
Specification
| Light sources | COB LED |
|---|---|
| Light power | Max 150 Im |
| Operation modes | 100% (white) |
50% (white)
Flashing (white)
100% (red)
50% (red)
Flashing (red)
Power supply| Li-poly 3,7V 500mAh
Charging type| MicroUSB 5V
Charging time| Approx 2h
Runtime| 100% (white/red) – approx 4h 50% (white/red) – approx 8h
Weight| 31g
Dimensions| 80 x 26 x 17mm
Waterproofness| IPX4
Material| ABS, PS, silicone
General information
The Everactive BL-150R DualBeam flashlight is equipped with a powerful LED,
and comes with mounting bracket and a microUSB cable for charging. The device
has six operating modes: white light 100%, white light 50%, flashing white
light, red light 100%, red light 50% and flashing red light. The flashlight is
powered by 500mAh Li-Poly rechargeable battery.
Using flashlight
The button at the top of the flashlight is used to switch it on and change
operating modes. After going through all the light modes the torch will switch
off, hold the button for 3 seconds to change the colour of the light.
Package contents
-EverActive BL-150R DualBeam,
-Mounting bracket,
-Micro USB cable,
-User manual.
Safety precautions
-Read user manual carefully before first use
-In case of prolonged inactivity, the device should be reacharged once every 3 months in order to maintain the battery life. Do not leave the device discharged.
-Protect the product from unsupervised use by children and ineligible persons.
-Do not disassembly, do not destroy, do not cause excessive shock and do not incinerate the device. Do not crush, protect against mechanical damage and fall. Do not place heavy objects on the unit.
-Avoid the sources of heat, flammable gases, protect against moisture and flooding.
-Do not allow foreign objects to enter the charger
-The device can heat up during the work and charging.
-Do not charge under pillows, blankets or on flammable surfaces.
-Do not operate device if it has beet wet or otherwise damaged. This could result in electrical shock or fire.
-Do not leave the device unattended during operation.
The product should be disposed of properly according to applicable law. At the
end of life the product should be passed to the waste collection, electronic
recycling point. It is not allowed to dispose the product with the regular
household wastes. By proper disposal you contribute to the protection of the
environment and natural resources. More on:
www.everActive.pl/eco.
Warranty
Baltrade will repair or replace your device free of charge if it is proven to
be defective within two years from the date of purchase. Baltrade shall not be
held liable for any damage caused by misuse or not using the product in
accordance with this manual. Warranty will be invalid if the device was
modified in any way, disassembled, exposed to moisture, liquids, ingression of
solid objects, extreme thermal or environmental conditions. If the device was
proven to be defective, it will be repaired or replaced. In the event of a
warranty claim, please contact the retailer from whom you purchased your
device. You can also send it together with all accessories, to the address
below:
Baltrade sp. z o.o.
Kartuska 493
80-298 Gdansk, Poland
E-mail: [email protected] Receipt or invoice
as a proof of purchase should beprovided. This warranty does not affect and is
in addition to legal (statutory) rights under applicable national laws
relating to the sale of consumer products.
Baltrade sp. z o.o., ul. Kartuska 493, 80-298 Gdansk, Poland
www.everActive.pl