MUNBYN ITPP047P Receipt Printer Thermal Receipt Printer Works Installation Guide

ITPP047P Receipt Printer Thermal Receipt Printer Works
Installation Guide

Introduction

This document explains the setup procedure for the MDPO47P. Please read the instructions before using the printer.
For further instructions, please refer to the ITPPO47 software manual. http://u.pc.cd/XoActalK

Check the Packing List

1. Printer
2. Power Cord
3. Roller
4. User Manual
5. Roll Paper
6. Power Adaptor
7. USB Cable

In case of omission or damage, please contact us via the contact details below.

|
---|---
https://wa.me/qr/UTUXFZQZF2LHA1| https://www.facebook.com/munbyn/

support@munbyn.com
**** +1 650 206 2250
munbyn
Monday to Friday 24 hours

Paper Loading

1. Press the cover opening button and then open the cover.

2. Insert a roll of paper in the direction shown in the illustration.
   

3. Pull the end of the paper out straight, and push down the printer cover to close.

Initial Setup

4.1 Set Up The ITPPO47P for First Use on Windows
4.1.1 Download Windows Driver
You can download the driver and setup tool at the link below:
Driver download http://u.pc.cd/UeTctalK
Setting tool download http://u.Dc.cd/OAsrtalK
4.1.2 USB Interface

1. Connect the printer to the power outlet via the power cord.
2. Connect the printer to your Windows computer via USB.
3. Place the thermal paper into the printer and power it on.
   

Open the downloaded driver and install it. Demo video: http://u.bc.cd/enX
4.1.3 LAN Interface

1. Connect the printer to the router with a network cable. Please see the picture below.
2. Turn on the printer on/off button, and open the download driver and install it, then follow the demo video to configure the LAN.
   Demo video: http://u.pc.cd/rmD

4.1.4 Bluetooth Printer Installation
Open the downloaded driver and install it, then follow the demo video to configure Bluetooth.
Demo video: http://u.pc.cd/5KUrtalK
Notice: Only the Bluetooth model ITPPO47PUSEB has Bluetooth capability.The printer’s Bluetooth name is TM-m30 001
4.1.5 Wi-Fi Printer Installation

1. Connect your computer to the wireless router. Please see the picture below.
   

2. Connect the computer to the router with a network cable. Please see the picture below.
   

3. Follow the video below to set the printer’s new STA IP address Demo video: https://youtu.be/IY14NtIOY5U

4. Open the downloaded driver and install it, then follow the demo video to configure Wi-Fi. Demo video: http://u.pc.cd/L9IctalK

Notice: Only the WiFi model ITPPO47PUSEW has WiFi capability.The printer’s WiFi name is TM-m30 001
4.2 Set Up The ITPPO47P for First Use on MacBook
4.2.1 Download MacBook Driver
You can click the link below to download the driver.
Driver download: http://u.pc.cd/SlHctalK
4.2.2 USB Interface

1. Connect the printer to the power outlet via the power cord.
2. Connect the printer to your Windows computer via USB.
3. Place the thermal paper into the printer and power it on.
   

Open the downloaded driver and install it. Demo video: http://u.bc.cd/3sSrtaIK
4.2.3 LAN Interface
Connect your computer to the wireless router. Please see the below picture.
Open the downloaded driver and install it, then follow the demo video to configure the LAN.
Demo video: http://u.pc.cd/fwrctaIK
Notice: Mac computers cannot connect to the printer using Bluetooth, if you want to use Bluetooth connection, please use Windows or Android devices.
4.2.4 Wi-Fi Printer Installation
Connect your computer to the wireless router. Please see the picture below.
Open the downloaded driver and install it, then follow the demo video to configure Wi- Fi.
Demo video: https://munbyn.biz/Mac-WIFI
Notice: Only the WiFi model ITPPO47PUSEW has WiFi capability.The printer’s WiFi name is TM-m30 001
4.3 Set Up The ITPPO47P for First Use on Linux
You can download the driver at the link below
Linux driver download link http://u.oc.cd/jxP7
Raspberry Pi driver download link http://u.pc.cd/J6qrtalK

1. Connect the printer to the power outlet via the power cord.
2. Connect the printer to your Windows computer via USB.
3. Place the thermal paper into the printer and power it on.

Demo video: http://u.pc.cd/PzjctalK
4.4 Set Up The ITPPO47P for First Use on Chromebook

1. Connect the printer to the power outlet via the power cord.

2. Connect the printer to your Windows computer via USB.

3. Place the thermal paper into the printer and power it on.
   

4. Enter in Google Chrome: http://munbyn.bizichromebookprint
   

5. Click “Add to Chrome” first, and then click “Add extension” to download and add the extension.
   

6. Follow the demo video to add the printer. Demo video: http://u.pc.cd/Bh3itaIK

4.5 Set Up The ITPPO47P for First Use on Android
4.5.1 Wi-Fi Printer Installation
Prepare a router and a network cable, and connect the network cable to the router.
Follow the Wi-Fi setup demo video to set up the printer to connect to your router, and finally connect the printer by using the IP address on your Android device.
Wi-Fi setup demo video. https://youtu.be/IY14NtIOYSU
Use the IP address to connect the printer in the Android POS App. Take Loyverse App as an example.
Android App Wi-Fi Connection demo video : http://u.pc.cd/HpY7
Notice: Only the WiFi model ITPPO47PUSEW has WiFi capability.The printer’s WiFi name is TM-m30 001
4.5.2 Bluetooth Printer Installation
Connect the printer with the EMIabel App on an Android device: http://u.pc.cd/zWa
EM La bel APP download : http://u.pc.cd/F5ectalK
Connect the printer with your POS App to your Android device: http://u.pc.cd/87ortalK
Notice: Only the Bluetooth model ITPPO47PUSEB has Bluetooth capability.The printer’s Bluetooth name is TM-m30 001

https://wa.me/qr/UTUXFZQZF2LHA1
https://www.facebook.com/munbyn/

Contact us
WhatsA Scan the QR code for pp and Facebook online chat
support@munbyn.com 
+8618144898200
+1650 206 7250
support.munbyn.com
(Online latest FAQ and how-to video)
If you meet any problem during using the ITPPO47P, please contact us.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>