Toyzee KY807 Stunt Elf Remote Control Vehicle Instruction Manual

Toyzee KY807 Stunt Elf Remote Control Vehicle

Product Information

Specifications

• Compliance : FCC Part 15
• Interference Conditions : Must not cause harmful interference and must accept any received interference
• Modifications : Changes or modifications not approved may void the user’s authority to operate

Product Usage Instructions

To ensure proper operation and compliance with FCC regulations, follow these usage instructions:

1. Installation
   Place the device on a stable surface away from other electronic devices to prevent interference.

2. Powering On
   Connect the device to a power source as per the provided instructions. Press the power button to turn it on.

3. Operation
   Use the device in accordance with its intended purpose. Avoid using in extreme conditions such as high humidity or temperature.

4. Maintenance
   Regularly clean the device using a soft, dry cloth. Avoid using harsh chemicals that may damage the device.

To ensure proper use, please read the instructions below and have a good understanding of the products before use.

Electric Control Products

Suitable for children over 6 years old. All electronic products should be carefully used to prevent electric shock.

Maintaining

This product contains electronic components. Don’t use it in a water or damp environment. Wipe the surface with a cloth.

1. Set the switch on the OFF position of the car and the remote control. (if the switch is available)
2. Use a cross-head screwdriver to open the battery cover
3. Install the rechargeable battery pack according to the figure below, and install the battery according to the corresponding “+” and “-” poles in the battery box.
4. Close the battery case and tighten it with cross-head screws.

DESCRIPTION OF THE FUNCTIONS OF THE REMOTE CONTROL

Note : Taich remote control, so be time controls cannot he used at the same time.

OPERATIONS OF REMOTE CONTROL AND CARS

1. Turn the switch on the car and remote control to “ON” position. (if switch is available)
2. Then, operate the car.
3. When your car starts to lose performance, power, or function, it may be the time to replace the battery or charge the battery pack.

NOTE : When the remote control cannot control the remote control car, first remove the battery of the remote control and re-install the battery, then turn off the power of the remote control car, then turn on the power, and then the remote control resets the frequency.

1. Forward/Backward
   Operate the “Forward/Backward” button to control the vehicle to make forward and backward movements.

2. Rotate Left/Right For 360-Degree
   Operate the button of “Rotate Left/Right For 360-Degree, the remote control car rotates 360° to the left/360°to the right.

3. Left Forward/Right Forward Side-slip
   Operate the button of “Left Forward/Right Forward Side-slip” the remote control car drifts to the left front/right front.

4. Left/Right Forward Turn. Left/Right Backward Turn
   Operate combined rocker “Left/Right Forward Tum- Left/Right Backward Tum”, the remote control car tums leit front» right front» tums left behind/right behind.

5. Left Sideways/Right Sideways
   Operate the button of “Left Sideways/Right Sideways” and the remote control car drifts to the left /right.

6. One-key Demonstration
   Operate the “One-key Demo” button to demonstrate the automatic stunt of the remote control vehicle.

Watch the remote control operation
Operate the following action to control the remote control car.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ

Q: What should I do if the device causes interference?
A: If the device causes interference, try relocating it or contacting customer support for assistance.

Q: Can I make modifications to the device?
A: No, any changes or modifications not approved may void your authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>