UMIDIGI G1 MP21 Smartphone User Manual

June 9, 2024
Umidigi

G2
MP21
Thanks for choosing UMIDIGl products

www.umidigi.com
Amazon service Email: amazonservice@umidigi.com

Building a great phone is hard enough, so building a great phone on a budget should be infinitely more difficult. Big thanks to all who made this superphone super awesome by contributing valu- able time and developing hardware, software & other developments. Thanks for choosing UMIDIGI products, thanks to your support our value can be realized and we can constantly move forward to create smart devices with better user experience.
www.umidigi.com
Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart device for free!

UMIDIGI G1 MP21 Smartphone - qr code

VK: vk.com/umidigi 
YouTube: youtube.com/umidigi 
Facebook: facebook.com/Umidigi 
Twitter: twitter.com/umidigi 
Instagram: instagram.com/umidigi

UMIDIGI is registered trademark by
Shenzhen Youmi Intelligent Technology Co., Ltd.
All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information

UMIDIGI is registered trademark by Shenzhen Youmi Intelligent Technology Co., Ltd. All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information

PRODUCT HEX-VISION IMAGE

UMIDIGI G1 MP21 Smartphone - image

POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.

UMIDIGI G1 MP21 Smartphone - image 2

POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.

CARD INSERT MANUAL

Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the slot. Be aware of the direction of the cut edge when placing the Nano-SIM card into the slot.

Reminder:
Please use standard Nano-SIM card. Please don’t use a nonstandard card that is hand-cut, in order to prevent the SIM slot and card tray from being damaged and card-rejection situation that may  cause damage to the phone. UMIDIGI G1
MP21 Smartphone - Sim 1

TF Card
Installation Please place the metal contact of the TF card adown, be aware of the direction of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the phone before changing or replacing the TF card.TF card does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be careful when using the slot thimble from scratching the phone.

DUAL-SIM MANAGEMENT

Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G/2G via Setting>Network&Internet> Mobile network > Preferred network type

NETWORK CONNECTION

Connecting WLAN
Into the setting of WLAN via Settings>Network&Internet>Wi-Fi When WLAN is on, a list available WiFi connection will appear. Click on the one you want to connect to, enter the password if the network isencrypted, then click Connect. When it’s a public network, just click Connect When the network shows “connected”, it is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button then select “Refresh”, then the phone will search for available Bluetooth devices for pairing and list on the screen. Click on the one you want to pair with, then click “Pair” on the dialog pop-up.Documents are available for transmission after Bluetooth pairing.

Reminder:

  • lade down the status bar twice to open the shortcut switches for
  • Bluetooth and other functions.

WLAN Hot-spot Setting
Click on via Settings>Network Internet>Hotspot tethering >Wi-Fi hotspot to turn on the Portable WLAN Hot-spot function.
When setting up WLAN hot-spot, enter your user name in “Network Name” and password, then click Save. Another device can use the WLAN hot-spot by searching and entering the password of  the password.

Reminder:
Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hot-spot  depends on the signal strength and devices

CAMERA
Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click “Capture” icon to take photos. You can also choose other modes such as video recording, beautifying, panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but cannot make phone calls at the same time. During the standby mode both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.

SECURITY INFORMATION
Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI holds disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause the device or some applications fail to work properly.
Please prevent the device or the battery in extreme cold/hot condition. The extreme temperature will lead to deformation of the phone and reduce the charging capacity and battery life.
Please only use the custom designed and approved battery and recharger by UMIDIGI. Incompatible battery and recharger may cause damage to the phone. Please abide by local regulation when disposing of the used batteries and phones.
Please do not place the battery or the phone onto or inside heating devices such as microwave, oven or radiator. The battery may explode if it gets too hot.
Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheating

BASIC INFORMATION|
---|---
Model
Operating System CPU
GPU RAM ROM Battery
Display| G2
Android’ 13(Go edition)
MT6761 Ouad-Core
4x ARM Cortex-A53 Mpcore up to 2.0GHz IMG PowerVR GE8300 up to 660MHz 2GB
32GB
5150mAh
Screen Size Resolution Touch
Cameras| 6.52 inch
720×1600 Pixels Capacitive multl-touch
Rear Camera Front Camera
Connection(I/O)| 13MP+2MP Camera 5MP Camera
Band
SIM/TF card
WIFI
Bluetooth
GNSS
FM
Earphone Port USB Port
Other Features| LTE FDD:B2/5/7/12 LTE TDD:B41
WCDMA:B2/5
GSM:82/5
2 Nano SIM Card Or 1 Nano SIM and 1 TF Card IEEE802.11 ac/a/b/g/n
Bluetooth 5.0
GPS. Beidou. Glonass.Galileo
Yes
3.5mm
Type-C
Video File Format Audio File Format Card Extend
Language
Sensor
In the box| 3GP/MPEG4.etc. WAV/MP3/AAC/AMR/MIDI/APE/WMA.etc. Support IF card up to 256 GB
Support Multi-language
G-Sensor, P-Sensor,L-Sensor, Compass.
1 x Phone
1x Screen Protector (pre-applied) 1x Phone Case
1x Type-C Cable
1x Power Adapter
1x SIM Tray Ejector
1x Ouick Stan Guide|

Android is a trademark of Google LLC.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals