IRIVER XB10 Bluetooth Headphone AMP Instruction Manual

: June 17, 2024
: IRIVER

IRIVER XB10 Bluetooth Headphone AMP

IRIVER-XB10-Bluetooth-Headphone-AMP-PRODUCT

Product Information

Specifications

Product Name: Bluetooth Headphone AMP XB10
Detachable clip included
Micro-USB Cable included
3.5 mm Port for connecting general-purpose earphones/headphones
2.5 mm Balance Port for connecting earphones/headphones with a balanced cable
Built-in microphone for phone call functionality

Overall Structure

The Bluetooth Headphone AMP XB10 features the following components:

Volume Control Key
Bluetooth Key
Power/Lock Key
Play/Pause and Multi-key
Skip Next/Previous Song Key
Status LED
Micro-USB Port (for Recharging)
3.5 mm Port
2.5 mm Balance Port
Built-In Microphone

Product Usage Instructions

Mounting the Clip

Please remove the rubber cover on the bottom of the product.
Insert one side of the clip first and then do the same with the other side.
Push the two sides slightly for a snug fit.

Turning the Device On/Off

Push the power key on the side of the device to the right for 3 seconds. You will hear a beep sound and see a blue light on the indicator before the power is on.
Push the power key on the side of the device to the right for 3 seconds while the device’s power is on. You will hear a beep sound and see a red light on the indicator before the power is off.

Bluetooth Pairing

Turn on the power by pushing the power key on the side of the device to the right for 3 seconds.
Press the Bluetooth key for 3 seconds. You will hear a beep sound and see flashing blue and red lights alternately before the pairing is ready.
Turn on Bluetooth on the device you want to connect.
Select this device (XB10) from the list of devices available for Bluetooth connection for pairing. For iOS, go to Bluetooth settings and select XB10. For Android, go to Bluetooth settings and select XB10.
Once pairing is completed, you will hear a beep sound and see a flashing blue light on the indicator with an interval of 3 seconds. You can now replay music from a device connected through Bluetooth.
To switch to pairing standby mode for connection with other devices, press and hold the [ ] key while paired.

FAQ

Q: Can I use the XB10 with non-Bluetooth devices?
A: No, the XB10 can only be paired with devices that have Bluetooth functionality.
Q: How do I charge the XB10?
A: Connect the Micro-USB connector to the device and connect the other end to a 5V 2A adapter (sold separately) or a PC using the provided Micro USB cable. The charging process will start.
Q: Can I make phone calls with the XB10?
A: Yes, the XB10 has a built-in microphone that supports phone call functionality.

What’s Inside

The items listed herein are subject to change without prior notice for the purpose of performance improvement or due to the manufacturer’s circumstance

Mounting the Clip

Please remove the rubber cover on the bottom of the product.
Please insert one side of the clip first and then do the same with the other side.
Push the two side slightly for a snug fit.

Overall Structure

$IRIVER-XB10-Bluetooth-Headphone-AMP-FIG- $5$$

FEATURES

Skip Next/Previous Song Key
Replays the next/previous song.
Power Key
To the right: You can turn the device on/off by pushing the key to the right side for about 3 seconds.
To the left: You can lock all keys by pushing the key to the left side.
Volume Control Key
You can control the volume by using the [+]/[-] keys.
Bluetooth Key
You can pair this device with other devices equipped with Bluetooth functionality.
Play/Pause and Multi-key
You can replay or pause music and turn on/off the DCT mode in the middle of replaying music.
Status LED
You can check power on/off, Bluetooth pairing, DCT mode on/off, and recharging status through the LED indicator light.
Earphone Jack
You can listen to music by connecting with a general-purpose 3.5-mm earphone or headphones.
Balance Port
You can listen to music by connecting with an earphone or headphones that support the balance cable (2.5 mm).
Micro USB connector (only charging)
Connect the device with 5V 2A adapter (sold separately) or PC using a Micro USB cable.
Charging starts.
Built-In Microphone
Supports phone call functionality

Turning the Device On/Off

Push the power key on the side of the device to the right for 3 seconds and you will hear a beep sound and see a blue light on the indicator before the power is on.
Push the power key on the side of the device to the right for 3 seconds while the device’s power is on and you will hear a beep sound and see a red light on the indicator before the power is off.

Bluetooth Pairing

Qualcomm® aptX™ / Qualcomm® aptX™ HD audio
The XB10 supports Qualcomm® aptX™ and Qualcomm® aptX™ HD audio codec standards. Qualcomm® aptX™ and Qualcomm® aptX™ HD audio codecs only work on smartphones and audio devices that support the technology.

You can turn on the power by pushing the power key on the side of the device to the right for 3 seconds.
Press the Bluetooth key for 3 seconds and you will hear a beep sound and see flashing blue and red lights alternately before pairing is ready.
Turn on Bluetooth of the device with which you want to connect.
Select this device on the list of devices available for Bluetooth connection for pairing.
Setting up iOS>Bluetooth>Select “XB10”
Setting up Android>Bluetooth>Select “XB10”
Once pairing is completed, you will hear a beep sound and see a flashing blue light on the indicator with an interval of 3 seconds. You can replay music from a device connected through Bluetooth.
Press and hold the [ ] key while paired to switch to pairing standby mode for connection with other devices.

When connected first time the device goes directly to the pairing mode immediately after the power is turned on.
The Bluetooth key will be disabled when music is replayed or you are talking on the phone.
For instructions on how to pair this product with your device, please refer to Bluetooth pairing instructions on each device.
The XB10 automatically reconnects to the last connected device. If the last device is not automatically reconnected, find the XB10 from the desired device to establish a connection.
During playback, the long press action on [ / ] key may not function properly depending on the specifications of the device to use.

Multi pairing

Have two devices (A&B) for multi-pairing ready.
Connect the first device (A) and XB10.
Press the Bluetooth key to enter the pairing mode. (At this time, A that is paired will be disconnected.)
Connect XB10 and the second device (B).
Select XB10 from the Bluetooth items of A that were connected first.
Pair XB10 with both A and B.

Multi-pairing supports up to two devices. When two devices are multi-paired, you must stop playing music from one device before you play music on the other.

Listening to Music

Press the [ ] key once lightly. Press the [ ] key once while the music is played. If you want to start replaying again, press it again.
- When replaying music first time, you may have to activate the music player of the device to which this product is connected.
To play the previous/next song, press the [ ]/[ ] key briefly.
To fast-forward or rewind, press the [ ]/[ ] key at length.
You can adjust the volume by pressing the [ ]/[ ] key while replaying.
- You can hear a beep sound when you control the volume and you reach a minimum/maximum volume level.
Press and hold the [ / ] key to adjust the volume in increments.
Press the [ ] key for 4 seconds and you can hear a beep sound with blue and green alternating lights before the DCT mode is turned on.
Press the [ ] key for 4 seconds when the DCT mode is on and you can hear a beep sound before the DCT mode is turned off

The XB10 supports Distinctive Clear Technology (DCT), a digital noise removal technology, so that you can enjoy clearer and crispier sound.
The DCT mode is operational only when music is played.

CAUTION
Please do not keep a higher volume for a long time to avoid any possible damage to your ears. For your safety, do not use this product while driving or cycling. It may cause hazards due to sound insulation

Talking on the Phone

Once the phone rings, you can take the call by pressing the [ ] key in the product. You can reject an incoming phone call by pressing the [ ] key for 3 seconds.
While talking on the phone, you can hang up by pressing the [ ] key.
When making a phone call, you can cancel the call by pressing the [ ] key.

Resetting

If you experience a malfunction or freeze, you can reset the system by pushing the power key on the side to the right for 8 seconds.

Lock

If you push the power/lock key on the side to the left, all keys will be locked. If you push the key to the opposite side, all keys will be unlocked. With this lock, you can keep keys from being operated accidentally

Recharging

You can recharge the product by inserting a Micro USB cable that comes with the package in the USB port located on its side. The indicator shows a red light if it is being recharged and it shows a blue light if it is fully charged.
If the battery power remains below 10 percent, a red light will flash on all operational modes with a beeping sound.

$IRIVER-XB10-Bluetooth-Headphone-AMP-FIG- $12$$

In some devices, you can find out the remaining battery power on the upperside bar together with Bluetooth indication

Status Indicator Light

Power on
The light turns blue and then flashes
Power off
Flashing red light
Bluetooth connection standby
Blue light flashing twice every 2 seconds (status not connecting with the master)
Pairing standby
Blue and red light flashing alternately (status connection with the master available)
Pairing complete
Blue light flashing once every 3 seconds (status fully connected with the master)
Music replaying state
DCT off Blue light flashing once every 5 seconds
DCT on Blue and green light flashing alternately once every 5 seconds
Phone calling status
Blue light flashing once every 5 seconds
Status of a call incoming
Blue light flashing once every 0.5 second
Status of a call outgoing
Blue light flashing once every 0.5 second
Charging
Red light on
Charging completed
Blue light on
Low battery
Red light on during all operating conditions

If you keep pressing the XB10 Bluetooth key for 2 seconds on Bluetooth connection standby or pairing completed with the master, you can change it to pairing standby and connect with another device.
Since rechargeable batteries are consumables, they may not last as long as indicated depending on the operating environment, and battery life may be gradually reduced.
Bluetooth operating distances vary with the usage environment.
The use of this device with products other than the specified compatible AK products may cause malfunctions.

Specifications

IRIVER-XB10-Bluetooth-Headphone-AMP-FIG- 15

Troubleshooting

The device won’t turn on.
Please check whether the power adaptor is connected properly. Please check whether the device is charged. Charge with a 5V 2A output adapter. We recommend the use of the Micro USB cable that comes with the package.
No sound comes out except static and noise.
Please check whether the volume is set at [0].
Please check whether the earphones are plugged in properly, and make sure dust isn’t obstructing the port connection. Please check the volume of the device to which it is connected.
Please make sure that the music file is not corrupted.
Please check whether Bluetooth pairing is properly made.
Please find out whether there is any device causing frequency interference nearby.
Please find the best signal-receiving location by moving the device slowly.
Bluetooth connection is not made.
Please maintain the distance between the product with a Bluetooth device (maximum signal receiving distance is 10 meters)

Precautions

Do not put heavy objects on the product.
If the product gets wet from rain (water),V beverage, liquid medicine, sweat, or moisture, never turn it on. Wipe it with a dry cloth, and get it checked at the nearest iriver service center (Water-damaged devices may not be available for free repair regardless of warranty status).
Avoid places with excessive moisture, dust, or smoke.
Never disassemble, repair or alter the product. Avoid exposing the device to direct sunlight or extreme temperatures.
Do not keep the product next to strongly magnetic objects like magnets, TVs, monitors, and speakers.
As chemicals or detergents change the surface of the product and remove the paint, never use them.
Do not drop the product or give a strong shock to the product (places where there is strong vibration. etc.).
Do not press two or more keys at the same time.

Copyright

iriver Limited retains the rights to patents, trademarks, copyrights, and other intellectual property rights related to this manual.
No contents of this user manual may be duplicated or reproduced in any format or by any means without the prior approval of iriver Limited. Using or reproducing, in whole or part, the contents of this document is subject to penalties. Software, audio, video, and any other copyrighted content are protected by relevant copyright laws. The user accepts all legal responsibility for the unauthorized reproduction or distribution of copyrighted content from this product. Companies, organizations, products, people, and events used in the examples are not based on actual data. iriver has no intention to be associated with any company, institution, product, person, or incident through this instruction manual, and no such inference should be made.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by iriver Ltd. is under license.
Qualcomm® aptX™ HD audio is a product of Qualcomm Technologies International, Ltd.

Disclaimers

The manufacturer, importer, and distributor shall not be liable for damages including accidental and personal injury due to the improper use or operation of this product. The information in this user manual was written based on current product specifications.
The manufacturer, iriver Limited, is adding new complementary features and will continue to apply new technologies in the future.
All specifications may be changed without prior notice. There is no warranty against data loss due to the use of this product.

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

FCC notification to users

This equipment has been tested and found to comply with the limits for a CLASS B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference, the user is encouraged to try to correct the interference by consulting with a dealer or an experienced technician for technical assistance.
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Limited Warranty Statement

EUROPE ENGLISH THIS WARRANTY CARD IS VALID ONLY FOR SERVICE ON PRODUCTS PURCHASED IN EU AND NON-EU EUROPEAN COUNTRIES.
For other countries, please contact the Store/ Dealer where purchased.
Thank you for purchasing an iriver product. All river products come with a one-year limited warranty against defects in materials and workmanship from the original date of purchase from an authorized agent. driver’s warranty covers only those defects that arise as a result of normal use of the product. The customer shall NOT have any claim under this warranty for repair or adjustment expenses if;

The product is repaired or altered unless done or approved by the iriver.
The problem is caused by using in violation of any operating or handling instructions provided by iriver.
The problem is caused by unusual physical or electrical stress, misuse, abuse power shortage, or negligence.
The problem is caused by a fire or other natural calamity.
The *warranty period has expired.

WARRANTY PERIOD $IRIVER-XB10-Bluetooth-Headphone-AMP-FIG- $13$$

If you have any problems or suggestions with this product, please contact one of the following.
URL: http://www.iriver.com
e-mail: [email protected]

THIS WARRANTY CARD IS VALID ONLY FOR SERVICE ON PRODUCTS PURCHASED IN NORTH AMERICA.
For other countries, please contact the Store/ Dealer where purchased. Thank you for purchasing an iriver product. All river products come with a one-year limited warranty against defects in materials and workmanship from the original date of purchase from an authorized agent. iriver’s warranty covers only those defects which arise as a result of the normal use of the product. The customer shall NOT have any claim under this warranty for repair or adjustment expenses if;

The product is repaired or altered unless done or approved by the iriver.
The problem is caused by using in violation of any operating or handling instructions provided by iriver.
The problem is caused by unusual physical or electrical stress, misuse, abuse’ power shortage, or negligence.
The problem is caused by a fire or other natural calamity.
The *warranty period has expired.

Warranty Period $IRIVER-XB10-Bluetooth-Headphone-AMP-FIG- $14$$

If you have any problems or suggestions with this product, please contact one of the following.
URL: http://www.iriver.com
e-mail : [email protected]
www.iriver.co.kr
© 1999~2016 IRIVER Limited. All rights reserved.