KLEIN TOOLS TI250 Rechargeable Thermal Imager Instruction Manual

June 4, 2024
KLEIN TOOLS

KLEIN TOOLS TI250 Rechargeable Thermal Imager Instruction Manual

KLEIN TOOLS TI250 Rechargeable Thermal Imager

  • 49,152 (256 × 192) PIXELS TO TROUBLESHOOT  HOT AND COLDSPOTS
  • ADJUSTABLE EMISSIVITY FROM 0.01 TO 0.99
  • TRANSFER PHOTOS WIRELESSLY USING AN INTEGRATED-FI HOTSPOT
  • RECHARGEABLE LITHIUM-ION BATTERY

GENERAL SPECIFICATIONS

The Klein Tools TI290 is a high resolution, USB rechargeable professional Thermal Imager; power on to view unseen hot and cold spots for instant troubleshooting. The meter provides high and low-temperature points, crosshairs to pinpoint specific temperatures and options for temperature alarms. Wi-Fi setting allows the meter to transfer and share images for reporting.

  • Environment: Indoor: DO NOT expose to moisture rain or snow
  • Operating Altitude: 6562 ft. (2000 m)
  • Relative Humidity: <85% non-condensing
  • Operating Temp: 32° to 113°F (0° to 45°C)
  • Storage Temp: -4° to 140°F (-20° to 60°C )
  • Sensor: VOx Microbolometer
  • Sensor Resolution: 49152 pixels (256 × 192)
  • Field of View (FOV): 55.6 +/- 2.8 degrees
  • Frame Rate: 9 Hz
  • Sensitivity: ≤50 mK
  • Temperature Range: -4° to 752°F (-20° to 400°C)
  • Temperature Resolution: 0.1°F/0.1°C
  • Temperature Accuracy: ±2°C (±2°F) or 2% (whichever is greater)  NOTE:  Not calibrated below -10°C (14°F)
  • Temperature Display: High, Low, and Center point
  • Temperature Settings: °F / °C
  • Emissivity: 0.01 to 0.99 adjustable (0.95 default)
  • Display Type: 3.5″ (89 mm) TFT LCD
  • Color Palettes: Ironbow, Rainbow, Grayscale
  • Image Format: JPG
  • Image Storage: Up to 10000 thermal images
  • Image Transfer: USB, or Wi-Fi using the Klein Tools App
  • Dimensions: 4.48″ × 3.10″ × 1.06″ (113.7 × 78.7 × 26.9 mm)
  • Weight: 7.5 oz. (213 g)
  • Power: Lithium polymer battery (USB rechargeable) 3.7V / 2000mAh (7.4 Wh)
  • Required Charger Voltage / Current : 5V DC, 2A
  • Charging Current / Time: 900mA / 3 hours
  • Auto Power Off: User-selectable for 5, 10, or 30 minutes
  • Pollution degree: 2
  • Drop Protection: 6.6′ (2 m)
  • Standards: Conforms to UL STD. 61010-1
    Certified to CSA STD. C22.2 No. 61010-1 5001748.

WARNINGS
Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in a risk of fire or electric shock. Keep these instructions for future reference.

  • DO NOT use the product if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or injury.
  • Risk of fire and burns. DO NOT open, crush, heat above specified maximum temperature or incinerate. Prolonged exposure to direct sunlight can result in elevated temperatures.
  • If the battery’s internal temperature gets too high, the unit will shut down until the internal temperature is lowered.
  • DO NOT expose to moisture, rain, or snow.
  • DO NOT subject to impacts or drops greater than 6.6 ft. (2 m). Drops larger than this may not show signs of damage, but internal components may have been compromised. It is advisable to replace the unit if any such severe events occur.
  • There are no user-serviceable parts inside. DO NOT open or attempt to repair.

CAUTION

  • BURN HAZARD. Reflective materials may have a higher actual temperature than the measured temperature. Set emissivity to match the object being measured (see Emissivity section).
  • Do not point the camera at the sun or any other strong energy source. This can affect the accuracy of the camera or cause damage to the sensor.

WARNING SYMBOLS ON TESTER

| Warning or caution
---|---
| Risk of Electrical Shock
| Read instructions before using
OTHER SYMBOLS ON THE TESTER
| Conforms with European
| UKCA: UK Conformity Assessment
| This product has been independently tested by Intertek
| WEEE: Electronics Disposal
| USB rechargeable

COMPLIANCE

FCC COMPLIANCE
This device complies with part 15 of the FCC RULES. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this evice must accept any interference received, including interference that may cause undesired operation.
NOTE:  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide easonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and ed n accordance with the instructions,  may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is courageous to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

FCC RF EXPOSURE STATEMENTS:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC RFExposure Guidelines. This device must not be co‐located or operated in conjunction with any other antenna or transmitter.
IC COMPLIANCE
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003.
IC RADIATION EXPOSURE STATEMENT:
The equipment complies with SAR limits set forth for an uncontrolled environment and meets the RSS-102 of the IC RF Exposure Rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
EU DECLARATION OF CONFORMITY
Hereby, Klein Tools declares that this product is in compliance with Directive 2014/53/EU and all other applicable EU requirements. The complete declaration of conformity can be found on this product’s page at www.kleintools.com.
UKCA DECLARATION OF CONFORMITY
Hereby, Klein Tools declares that this product is in compliance with the relevant statutory requirements. The complete declaration of conformity can be found on this product’s page at www.kleintools.com.

FEATURE DETAILS

IMAGER

1. LCD Screen
2. Power On / Off Button
3. Camera Shutter Button
4. Up-Scroll Button
5. Down-Scroll Button| 6. Menu / Select / Back Button
7. USB-C Charging / Data Port
8. USB-C Port Cover
9. Camera
10. Lanyard Hole
---|---

LCD
A. Center Target Temperature
B1. Center Temperature Crosshair
B2. Low Temperature Crosshair
B3. High Temperature Crosshair
B4. High/Low-Temperature Differential
C. Live Temperature Scale
D. Battery Level Indicator
E. Menu Functions
F. Temperature Units (°F / °C)
G. Center Target Temperature and High / Low Temperature On / Off
H. Color Palettes (Ironbow, Rainbow, Grayscale)
I. Gallery
J. Settings

OPERATING INSTRUCTIONS

NOTE:  Fully charge before first use.
CHARGING
Connect included USB-C cable to USB-C Charging Port 7, and plug the other end into a computer, USB AC adapter, or other USB power supply (not included). While charging, if the unit is powered on, the Battery Level Indicator D will show a charging symbol. If powered off, a battery charging animation will be shown for 10 seconds.
The normal charging time is about 3 hours.
NOTE:  Keep the USB-C Port Cover 8 over the charging port when not in use.
FUNCTION BUTTONS
Press Power On / Off Button 2 for 2 seconds to power the unit on or off. When powering on, the start-up screen will display for 10 seconds as the imager runs self-calibration.  hen complete, the display will show the thermal image with the center target temperature and high/low temperatures. Press Menu / Select Button 6 to access Menu functions and setup. Use the Up 4 and Down 5 Scroll Buttons to scroll through the menu.
MENU FUNCTION
Press the Menu / Select Button 6 and the Menu and Setup functions(shown below) will appear on the LCD. Use the Up 4 and Down 5 Scroll Buttons to scroll through the functions. Press the Menu / SelectButton 6 to open the function or make a selection. To exit the function hide the menu, long press the Menu / Select Button 6.
Temperature Units:  Selectable between °F and °C.
G Center Target Temperature and High / Low Temperature: Turn these icons on or off.
H Color Palettes: Selectable between Ironbow, Rainbow, and Grayscale.
Gallery:  Scroll through and view captured images.
Settings:

  • WiFi Image Transfer: Connects to KleinTools App to transfer files.
  • Temp Bar: Turns feature on or off.
  • Time & Date: Sets time and date stamp for images.
  • Emissivity: Adjustable from 0.01 to 0.99 (default is 0.95).
  • Auto Power Off: Set to 5, 10, or 30 minutes.
  • Brightness: User-selectable low, medium, or high.
  • HI/LO Alert: Sets temperature alarms.
  • Local Info: Provides information on the firmware version, memory capacity, memory available, and battery temperature.
  • Default Settings Reset: Restores factory-default settings.
  • Erase All Images: Permanently deletes all images from TI290.

IMAGE CAPTURE
Press Camera Shutter Button 3 to take an image.  NOTE:  Menu E must be hidden to take an image. Press the Up Scroll Button 4 to save the image, or the Down ScrollButton 5 to discard the image.
Wi-Fi TRANSFER
On the imager:

Press the power button 2 for 2 seconds to power on the TI290. Next press the Menu/Select button 6 to access the Menu. Use the Up 4 and Down 5Scroll Buttons to scroll to the Settings menu and press the Menu/Select button 6 . Select WiFi Photo Transfer (first item); press the Menu/Select button 6 . LCD will read “TURNING ON WIFI “, then  WAITING FOR CONNECTION FROM MOBILE DEVICE, Follow instructions in Klein Tools APP “.
On your device:
Download the Klein Tools App (available for free from Google Play TM or the App Store ® ). Launch the Klein Tools App on your device. To properly connect to TI290 and tore images on your device, accept all pop-up app permissions. Tap the “Connect” button on the app and select/join the KT-TI290 Wi-Fi network. If your device prompts you to connect to the device, tap the “Connect” button. If the KT-TI290 Wi-Fi network is not found, ensure that Wi- Fi is enabled in your device’s settings. Once connected, tap the  Transfer Photos” button. All images will transfer from TI290 to your device. Select the images you want to save and press the “Save To Phone” button. Saved images can now be accessed in the app’s gallery and selected and shared using your device’s standard options.

BATTERY INDICATOR

  • Solid Green: Battery has more than 40% charge remaining
  • Partial Yellow: Battery has less than 40% charge remaining
  • Partial Red: Low battery, needs recharging
  • Blinks Red 10 Times: No Power, Immediate Shut Down

EMISSIVITY
Emissivity is a measure of the ability of a surface to emit thermal energy by radiation. Different types of surfaces (metals, masonry, wood, etc.) emit thermal energy through radiation at different efficiencies. Accordingly, these materials have different emissivity coefficients which must be considered in order to make accurate measurements with an infrared thermometer. Emissivity on the TI290 may be adjusted from 0.01 to 0.99 to enable accurate measurement of the temperature of most types of materials. Generally speaking, shiny bright surfaces such as chrome, whiteboards, etc. exhibit lower emissivity than flat black materials.
For guidance only, the chart below may be used to estimate emissivity for many different types of materials. However, the emissivity of surfaces is dependent upon many parameters such as surface finish, temperature, the shape of the object, etc.
This chart should be used for guidance only.

Material Emissivity
Asphalt 0.93
Red brick 0.93
Gray brick 0.75
Porcelain ceramic 0.92
Fired clay 0.91
Rough concrete 0.94
Cotton cloth 0.77
Smooth glass 0.92 – 0.94
Granite 0.45
Gravel 0.28
Smooth ice 0.97
Smooth white marble 0.56
Black paint 0.96
Hard rubber 0.94
Wood 0.80 – 0.90
Matte Copper 0.22
Commercial sheet aluminum 0.09
Cold rolled steel 0.75 – 0.85

Find a comprehensive list of emissivity values in the app’s FAQ section or visit www.kleintools.com/emissivity.
CLEANING
Be sure the unit is turned off and wiped with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.
STORAGE
Do not expose to high temperatures or humidity. After a period of storage in extreme conditions exceeding the limits mentioned in the General Specifications section, allow the unit o return to normal operating conditions before use.
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov/recycle for additional information.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

KLEIN TOOLS User Manuals

Related Manuals