levenhuk Fatum Z1000 Thermo Vision Monocular User Manual

: June 9, 2024
: levenhuk

Table of Contents

levenhuk Fatum Z1000 Thermo Vision Monocular
Levenhuk Fatum Z1000 Thermo Vision Monocular
- Getting started
Specifications
Care and maintenance
- Battery safety instructions
Levenhuk Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk Fatum Z1000 Thermo Vision Monocular

levenhuk-Fatum-Z1000-Thermal-Vision-Monocular-product-
image

Levenhuk Fatum Z1000 Thermo Vision Monocular

Caution! Please remember that mains voltage in most European countries is 220–240V. If you want to use your device in a country with a different mains voltage standard, remember that use of a converter is absolutely necessary.

The kit includes:

Plug
Power adapter
Micro HDMI cable
Type-C cable
Pouch
Shoulder strap

levenhuk-Fatum-Z1000-Thermal-Vision-Monocular-01

Working indicator lamp
PHOTO/VIDEO button
DOWN button
MENU button
UP button
POWER button
Focusing ring
Eyepiece
Charging indicator lamp
Diopter adjustment
Type-C/Micro HDMI
Ports
1/4″ thread
Laser indicator
Flashlight

levenhuk-Fatum-Z1000-Thermal-Vision-Monocular-02

Getting started

Charging the device
Connect the power cable to the device and the DC adapter via a USB plug and connect it to the AC power supply. When using the device for the first time, charge it for at least 4 hours.
Charging voltage and current: 5V, 2A.

Button panel and device settings

Buttons	Current device status	Press	Press and hold
POWER button	Power off	/	Power on
Power on	Compensation	Standby mode	Power off
UP button	Normal mode	Switch to scene mode	Zoom-in
Menu mode	Scroll up	/
Change the parameters value	/
MENU button	Normal mode	Enter the shortcut menu	Enter the main menu
Menu mode	Enter the submenu	Exit the menu/back to the previous menu

POWER button
Press and hold the POWER button for 3 seconds to turn the device on or off.
Standby mode: Press and hold the POWER button until the progress bar is displayed. Release the button before the progress bar is finished. To wake up the screen, press any button.
Compensation: Turn the device on and then press the POWER button.
Note: Put the lens cover on before completing scene compensation.

PHOTO/VIDEO button
Press the PHOTO/VIDEO button to take a photo and freeze it for 300ms to restore the real-time screen.
Press and hold the PHOTO/VIDEO button to start or finish a video recording.

UP button
Press the UP button for switching to scene mode (Natural/Highlighted/Enhanced).
Press and hold the button to zoom-in the picture.

DOWN button
Press the DOWN button to choose between 6 palettes: Black Hot, White Hot, Red Hot, Iron Red, Blue Hot, Green Hot. Press and hold the button to zoom-out the picture.

MENU button

Press the button once for entering the shortcut menu.
Press and hold the button for entering the main menu.
In the menu mode, press the MENU button to confirm the option. Press the UP and DOWN buttons for choosing between the available options. Press and hold the MENU button to return to the previous option or to exit the menu without saving the current setting.

Ranging
Use this function to estimate the distance to a target.

Go Shortcut menu > Ranging
Align the lower horizontal line with the bottom of the target image, use the UP and DOWN buttons to change the width between the upper and lower horizontal lines. The upper horizontal line should be aligned with the top of the target. The distance to the target can be estimated by referring to the approximate ranging values of the three animals (rabbit, boar, and deer) in the upper left corner. The reference heights of the three animals are 0.35m, 0.9m, and 1.5m, respectively.

HDMI cable
The external interface with a video cable allows you to connect the external power supply and the external screen at the same time and to output the image of the thermal imaging camera to the external monitor.
Note: The image can be displayed either on the device screen or on the external screen. When you disconnect the HDMI cable, the image on the device screen will be restored.

Remote Control by Mobile App/Wi-Fi Connection
Before using the remote control of this device, download an app TargetIR from the Apple App Store or from Google Play and install it on your tablet or smartphone.

Turn on the device.
Start the app on your smartphone, find account “HandHeld-TI-xxxx”, and enter the initial password “12345678”.

Specifications

IR Resolution, px/μm 640 × 480 / 12
Spectral range, μm 8… 14
Focal length, mm 35
Relative aperture f/1.0
Focus manual
Field of view (horizontal/vertical), ° 12.5×9.4
Optical zoom, x 2.0
Digital zoom, x 1–8
USB Type C (USB 2.0 standard)
Video output Micro HDMI
Wi-Fi 2.4GHz frequency band; distance 15m
Bluetooth +
Tripod adapter thread 1/4″
Display type 0.4″ FLCOS
Resolution 1280 × 960
Exit pupil distance, mm ≥10
Diopter adjustment –4… +2
Built-in memory 16GB
Automatic power-off 15, 30, or 60 min
Automatic standby mode 5, 10, or 15 min
Laser indicator up to 200 m
Power supply Built-in 2х18650 batteries, 6000mAh
Operating temperature range, °С (°F) –10… +50 (+14… 122)
Operating humidity range, % 10… 95

Detection range, m

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Never, under any circumstances, look directly at the Sun, another bright source of light or at a laser through this device, as this may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS. Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions. Do not try to disassemble the device on your own for any reason. Do not touch the optical surfaces with your fingers. Keep the device away from water and high humidity. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Please carefully read the safety instructions and user manual before using this product. Otherwise, it may result in hazardous laser radiation and electric shock. Use the device only as specified in the user manual. Keep away from children. Please DO NOT look directly into the beam with unprotected eyes or through an optical device at any time and never direct it toward other people. Do not use the product in explosive environment or close to flammable materials. Do not expose the device to shock, continuous vibrations, or extreme high or low temperatures. If a part of the device or battery is swallowed, seek medical attention immediately. Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk Warranty

Levenhuk products, except for their accessories, carry a 2-year warranty against defects in materials and workmanship. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise or if you need assistance in using your product, please contact the local Levenhuk branch.

www.levenhuk.com
Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612, USA, +1-813-468-3001, contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102, Czech Republic, +420 737-004-919, sales-info@levenhuk.cz Levenhuk® is a registered trademark of Levenhuk, Inc.
© 2006–2023 Levenhuk, Inc. All rights reserved.
20230215